archivers/p5-Compress-Snappy 0.25

archivers/p5-Compress-Snappy: Update to 0.25

Changes:	https://metacpan.org/dist/Compress-Snappy/changes

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

archivers: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Albert Vernon <f3cun3c02@sneakemail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Kuehn <freebsd@nagilum.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andreev Maxim
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Chernov <ache@FreeBSD.org>
  *  Andrey Kostenko <andrey@kostenko.name>
  *  Anes Mukhametov <anes@anes.su>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Ayumi M <ayu@commun.jp>
  *  Carsten Larsen <cs@innolan.dk>
  *  Chin-San Huang <chinsan.tw@gmail.com>
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Chris Larsen <darth@vader.dk>
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Cyrille Lefevre <cyrille.lefevre@laposte.net>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Felix Palmen <felix@palmen-it.de>
  *  Gabor Kovesdan <gabor@FreeBSD.org>
  *  Gea-Suan Lin (gslin@ccca.nctu.edu.tw)
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Hsin-Han You <hhyou@cs.nctu.edu.tw>
  *  Hye-Shik Chang
  *  Hye-Shik Chang <perky@FreeBSD.org>
  *  Igor Pokrovsky <tiamat@telegraph.spb.ru>
  *  Jaap Boender <jaapb@kerguelen.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jeff Burchell <toxic@doobie.com>
  *  Jeffrey H. Johnson <CPE1704TKS@bellsouth.net>
  *  Jerry Hicks
  *  Joao Carlos Mendes Luis <jonny@jonny.eng.br>
  *  John Marino <marino@FreeBSD.org>
  *  José García Juanino <jjuanino@gmail.com>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Kevin Golding <ports@caomhin.org>
  *  Konstantin Reznichenko <kot@premierbank.dp.ua>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark Kane <mark@mkproductions.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Matteo Cypriani <mcy@lm7.fr>
  *  Max Khon <fjoe@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Melvyn Sopacua <melvyn@magemana.nl>
  *  Miguel Mendez <flynn@energyhq.homeip.net>
  *  Nathan Ahlstrom <nra@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Patrick Seal <patseal@hyperhost.net>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Per Wigren
  *  Philippe Casidy <pcasidy@casidy.com>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Poul-Henning Kamp <phk@FreeBSD.org>
  *  Radim Kolar
  *  Radim Kolar <hsn@filez.com>
  *  Radim Kolar <hsn@netmag.cz>
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Richard Gallamore <ultima@FreeBSD.org>
  *  Roman Shterenzon <roman@xpert.com>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Sam Lawrance <boris@brooknet.com.au>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sir l33tname <sirl33tname@gmail.com>
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Stefan Esser <se@FreeBSD.org>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  Sylvio Cesar <sylvio@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Abthorpe <thomas@goodking.ca>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yarodin <yarodin@gmail.com>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  ache
  *  adamw
  *  antoine@FreeBSD.org
  *  bf <bf2006a@yahoo.com>
  *  chinsan <chinsan.tw@gmail.com>
  *  giffunip@asme.org
  *  gurkan@phys.ethz.ch
  *  iblis <iblis.dif01@nctu.edu.tw>
  *  ijliao
  *  jmz
  *  kwm@FreeBSD.org
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  mm
  *  ports@c0decafe.net <ports@c0decafe.net>
  *  samm@freebsd.org
  *  swhetzel@gmail.com
  *  will

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Cosmetic change

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

- Cleanup CHMOD after r390893

- Strip shared library - Bump PORTREVISION for package change

- Update to 0.24

Changes:	http://search.cpan.org/dist/Compress-Snappy/Changes

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

- Cleanup PLIST

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

- Update to 0.23

Changes:	http://search.cpan.org/dist/Compress-Snappy/Changes

- Remove LIB_DEPENDS: Compress::Snappy uses bundle snappy library - Bump PORTREVISION for dependency change

Submitted by:	vanilla

- Update to 0.22 - Support STAGEDIR

Changes:	http://search.cpan.org/dist/Compress-Snappy/Changes

Add NO_STAGE all over the place in preparation for the staging support (cat: archivers)

- Update to 0.21

Changes:	http://search.cpan.org/dist/Compress-Snappy/Changes

- Convert to new perl framework

- Update to 0.20

Changes:	http://search.cpan.org/dist/Compress-Snappy/Changes
Feature safe:	yes

- Remove outdated PERL_LEVEL check - Cleanup Makefile header

- Update to 0.19 - Add LICENSE

Changes:	http://search.cpan.org/dist/Compress-Snappy/Changes

- Add p5-Compress-Snappy 0.18

Compress::Snappy provides an interface to Google's Snappy (de)compressor.

Snappy does not aim for maximum compression, or compatibility with any other
compression library; instead, it aims for very high speeds and reasonable
compression. For instance, compared to the fastest mode of zlib, Snappy is an
order of magnitude faster for most inputs, but the resulting compressed files
are anywhere from 20% to 100% bigger.

WWW: http://search.cpan.org/dist/Compress-Snappy/