astro/p5-Astro-ADS1.91

astro/p5-Astro-ADS: update to 1.91

Changelog: https://metacpan.org/dist/Astro-ADS/changes

Add a short note on Makefile about how to  sucessfully
run the test target on poudriere

astro/p5-Astro-ADS: Update to 1.90

- Update WWW
- Update LICENSE
- Add LICENSE_FILE
- Update pkg-descr

Changes:	https://metacpan.org/dist/Astro-ADS/changes

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

astro: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  ABURAYER Rewsirow <rewsirow@ff.iij4u.or.jp>
  *  Alexander Leidinger
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Karpov <toxa@toxahost.ru>
  *  Brion Moss <brion@queeg.com>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Christian Brueffer <chris@unixpages.org>
  *  David Wolfskill
  *  Frank W. Josellis <frank@dynamical-systems.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Gleb Smirnoff <glebius@FreeBSD.org>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Jan Srzednicki <w@wrzask.pl>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jeremy Shaffner <jeremy@external.org>
  *  Keith Walker <kew@icehouse.net>
  *  Kirill Ponomarew <ponomarew@oberon.net>
  *  Kris Kennaway <kkennawa@physics.adelaide.edu.au>
  *  Kris Kennaway <kris@FreeBSD.org
  *  Laurent Courty
  *  Loïc BARTOLETTI <lbartoletti@FreeBSD.org>
  *  Lukas Maly <Iam@LukasMaly.NET>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Mathias Monnerville <mathias@monnerville.com>
  *  Muhammad Moinur Rahman <bofh@FreeBSD.org>
  *  Patrick Li <pat@FreeBSD.org>
  *  Patrick Li <pat@databits.net>
  *  Piero Serini <piero@FreeBSD.org>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Simon Olofsson <simon@olofsson.de>
  *  Slaven Rezic <slaven@rezic.de>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  Sébastien Santoro <dereckson@gmail.com>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Tatsuki Makino <tatsuki_makino@hotmail.com>
  *  Tony Maher <tonymaher@optusnet.com.au>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen Heping<wen@FreeBSD.org>
  *  Will Andrews <andrews@technologist.com>
  *  asami
  *  chuck@pkix.net
  *  crwhipp@gmail.com
  *  darius@dons.net.au
  *  db
  *  erich@FreeBSD.org
  *  freebsd-ports@henrik.synth.no
  *  ijliao
  *  nwhitehorn
  *  pat
  *  searle
  *  thierry@pompo.net
  *  torstenb
  *  trevor
  *  will

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except for where it resulted in a change in output from build-depends-list or run-depends-list.

Approved by:	portmgr (adamw)

Add LICENSE

- Add NO_ARCH

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Cleanup plist

- Update to 1.26

- Support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat: astro)

Update to 1.25.1.

- Convert to new perl framework - Trim Makefile header - Remove MAKE_JOBS_SAFE=yes, it's the default.

For perl@ owned ports:

- Fix COMMENT
- Trim header

- Remove SITE_PERL from *_DEPENDS

- Get Rid MD5 support

- Turn over a bunch of p5- ports that change infrequently to perl@   so more people can look at them.

- Mark most of my ports MAKE_JOBS_SAFE=yes

Tested by: several builds in P6 TB

Update my ports to my freebsd address

Approved by:    araujo (mentor)

- Use CPAN macro. - Pass maintainership to submitter.

PR:		ports/121996
Submitted by:	Philip M. Gollucci <pgollucci@p6m7g8.com>

- Remove old Perl support from unmaintained ports in categories starting   with letter a

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

- Add SHA256

- Update MASTER_SITES

PR:		ports/67071
Submitted by:	Roman Neuhauser <neuhauser@chello.cz>

Add SIZE.

Update to 1.20.7

Fix pkg-plist. Bump PORTREVISION

Reported by:	bento

De-pkg-comment.

o Rollback PORTCOMMENT modifications while this feature's implementation   is better studied o Turn PORTCOMMENT variable in Makefile back into pkg-comment files

Approved by:	kris (portmgr hat),
		portmgr, re (silence)

Use PORTCOMMENT in the Makefile, and whack the pkg-comment.

Approved by:	pat

add WWW

add p5-Astro-ADS 1.20.4 An OO Perl interface to the ADS abstract service