Mk/bsd.port.mk: Add __MAKE_CONF=${NONEXISTENT} to WRK_ENV
And remove it from individual ports. Use WRK_ENV in custom build
commands where necessary.
FreeBSD make(1) includes /usr/share/mk/sys.mk and that includes
/etc/make.conf if it exists. This happens when you run make in a port
directory but it also happens when the upstream build system uses make.
This commit disables make.conf inclusion in the latter case because
users can define variables like CFLAGS in make.conf that override ports
framework variables and this can cause problems that are difficult to
diagnose.
If there are any build customisations made through make.conf that stop
working because of this commit then they should be made available by the
ports tree through some mechanism, e.g. an option in a port.
Some ports were picking up variables from Poudriere make.conf and
required fixes:
- astro/wmspaceweather x11-clocks/wmcalclock: Add OPSYS to MAKE_ENV.
- games/zhlt: Add ARCH to MAKE_ENV.
- graphics/tachyon: Upstream ARCH is not ports tree ARCH.
Set ALL_TARGET=bsd so upstream ARCH is defined correctly.
Enable multi-threading support while here.
PR: 277455
Exp-run by: antoined7511b9d00Port details
astro/wmspaceweather1.04_6
DockApp that shows the weather at geosynchronous orbit
- Maintainer
- xride@FreeBSD.org
- Packages
- wmspaceweather 1.04_6
- Upstream
- Higher version available: 1.07
- CPE
- none, CVEs only via VuXML
- WWW
- UNKNOWN
- Links
- cgit · VuXML
Unaddressed (0) · The CVE record lists this version as affected, no VuXML entry names the CVE
None. There is no CVE without a VuXML entry for this version.
VuXML only (0) · listed, port not fixed yet
None.
pkg audit reports nothing for this version.Fixed (0)
No VuXML entries for this package.
Commits (42)
astro/wmspaceweather: Moved man to share/man Approved by: portmgr (blanket)1adcb63ca4
astro: remove 'Created by' lines A big Thank You to the original contributors of these ports: * ABURAYER Rewsirow <rewsirow@ff.iij4u.or.jp> * Alexander Leidinger * Alexey Dokuchaev <danfe@FreeBSD.org> * Andrew Pantyukhin <infofarmer@FreeBSD.org> * Andrey Zakhvatov * Anton Berezin <tobez@FreeBSD.org> * Anton Berezin <tobez@tobez.org> * Anton Karpov <toxa@toxahost.ru> * Brion Moss <brion@queeg.com> * Bruce M Simpson <bms@FreeBSD.org> * Chris Piazza <cpiazza@FreeBSD.org> * Christian Brueffer <chris@unixpages.org> * David Wolfskill * Frank W. Josellis <frank@dynamical-systems.org> * Gea-Suan Lin <gslin@gslin.org> * Gleb Smirnoff <glebius@FreeBSD.org> * Hye-Shik Chang <perky@fallin.lv> * Jan Srzednicki <w@wrzask.pl> * Jean-Yves Lefort <jylefort@FreeBSD.org> * Jean-Yves Lefort <jylefort@brutele.be> * Jeremy Shaffner <jeremy@external.org> * Keith Walker <kew@icehouse.net> * Kirill Ponomarew <ponomarew@oberon.net> * Kris Kennaway <kkennawa@physics.adelaide.edu.au> * Kris Kennaway <kris@FreeBSD.org * Laurent Courty * Loïc BARTOLETTI <lbartoletti@FreeBSD.org> * Lukas Maly <Iam@LukasMaly.NET> * Markus Brueffer <markus@FreeBSD.org> * Mathias Monnerville <mathias@monnerville.com> * Muhammad Moinur Rahman <bofh@FreeBSD.org> * Patrick Li <pat@FreeBSD.org> * Patrick Li <pat@databits.net> * Piero Serini <piero@FreeBSD.org> * Po-Chuan Hsieh <sunpoet@FreeBSD.org> * Simon Olofsson <simon@olofsson.de> * Slaven Rezic <slaven@rezic.de> * Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org> * Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net> * Sébastien Santoro <dereckson@gmail.com> * TAKATSU Tomonari <tota@FreeBSD.org> * Tatsuki Makino <tatsuki_makino@hotmail.com> * Tony Maher <tonymaher@optusnet.com.au> * Wen Heping <wen@FreeBSD.org> * Wen Heping <wenheping@gmail.com> * Wen Heping<wen@FreeBSD.org> * Will Andrews <andrews@technologist.com> * asami * chuck@pkix.net * crwhipp@gmail.com * darius@dons.net.au * db * erich@FreeBSD.org * freebsd-ports@henrik.synth.no * ijliao * nwhitehorn * pat * searle * thierry@pompo.net * torstenb * trevor * will With hat: portmgrb15254402b
Remove # $FreeBSD$ from Makefiles.305f148f48
Fix build error. Update URL's used to fetch runtime data from. Reported by: pkg-fallout@FreeBSD.ORG1b41273769
Add USES=xorg USES=gl, ports categories a Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories starting with 'a'.91c3b180c1
Cleanup patches, a* categories. Rename them to follow the make makepatch naming, and regenerate them. With hat: portmgr Sponsored by: Absolight9fa9eb9ac7
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight7f4572eae4Remove indefinite articles and trailing periods from COMMENT, plus minor COMMENT typos and surrounding whitespace fixes. Categories A-C. CR: D196 Approved by: portmgr (bapt)37e782dfbc
Fix make patch With hat: portmgrf1b6202b97
Support stage Regenerate patches with a proper name Fix shebang2d18d289ba
Add NO_STAGE all over the place in preparation for the staging support (cat: astro)701daf1eab
Rely on bsdtar to autodetermine the format of the distfiles when possible For a while now bsdtar is able to autotermine compression and archive format. Let's then use tar directly instead of piping to tar. Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format5271da855f
- Remove SITE_PERL from *_DEPENDS (final part) Approved by: portmgr@ (bapt@)8b040d94f2
MASTER_SITES updated + two minor items PR: ports/163643 Submitted by: Rainer Hurling <rhurlin@gwdg.de>304df214df
- Get Rid MD5 supporta9481afc8a
- Mark MAKE_JOBS_UNSAFE Reported by: pointyhat8c2aab382d
adopt this port96e2fce6fe
- Remove unneeded dependency from gtk12/gtk20 [1] - Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG - Remove X11BASE support in favor of LOCALBASE or PREFIX - Use USE_LDCONFIG instead of INSTALLS_SHLIB - Remove unneeded USE_GCC 3.4+ Thanks to all Helpers: Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr, ehaupt, nox, itetcu, flz, pav PR: 116263 Tested on: pointyhat Approved by: portmgr (pav)3e4ed01146
- USE_X_PREFIX and USE_XPM --> USE_XORG Approved by: miwi (mentor)db27ee311e
Clean up port descriptions for unmaintained ports in `astro' category: markup and spelling fixes, kill EOL whitespace and extraneous attribution.eda9d1c2b5
- Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.d4f0d0048a- Add SHA256d1b8ea31e7
Workaround for distfile actually just being a tar despite the .tar.gz-suffix PR: ports/78225 Submitted by: Aaron Dudekbf2289c9a5
- Fix fetch - Prune pkg-descr (me) PR: ports/77848 Submitted by: Sam Lawrenceb1c2d278c5
Fix download location for polling data. PR: ports/66149 Submitted by: Aaron Dudek <adudek@gwu.edu>f85153bff6
Add SIZE.e8d5605043
- Use PLIST_FILES PR: ports/61939 Submitted by: Stefan Walter <sw@gegenunendlich.de>ef23fa081f
Correct string buffer handling. Check for updates every 60 seconds as documented in the code, not every 2 seconds. Bump PORTREVISION. Obtained from: OpenBSD1c544281f2
De-pkg-comment.7cc1393a93
o Rollback PORTCOMMENT modifications while this feature's implementation is better studied o Turn PORTCOMMENT variable in Makefile back into pkg-comment files Approved by: kris (portmgr hat), portmgr, re (silence)f0a1969d34
Use PORTCOMMENT in the Makefile, and whack the pkg-comment. Approved by: patd9611f9375
Use time_t.767f15aedc
Support X11BASE properly remove USE_GMAKE PR: 20411 Submitted by: KATO Tsuguru <tkato@prontomail.ne.jp>e6119b936b
(1) Add new variable, XFREE86_VERSION, to specify which version of XFree86 (3 or 4) to depend to when USE_XLIB is set. XFREE86_VERSION defaults to 3 for now, but adventurous users can override it in /etc/make.conf. When XFREE86_VERSION=3, USE_XLIB will add a dependency to x11/XFree86; when it is set to 4, the dependency will be to x11/XFree86-4-libraries. When XFREE86_VER
Since XFree86 version 4 includes some software that used to be
separate ports, when XFREE86_VERSION=3 the following variables are
provided:
USE_DGS LIB_DEPENDS on x11/dgs
USE_FREETYPE LIB_DEPENDS on print/freetype
USE_MESA LIB_DEPENDS on graphics/Mesa3
USE_XPM LIB_DEPENDS on graphics/xpm
When XFREE86_VERSION=4, these variables have no effect. The
LIB_DEPENDS in the tree for the above four ports have all been
converted to the USE_* counterparts. For your information, this
is the count of the number of ports:
USE_DGS 0
USE_FREETYPE 16
USE_MESA 36
USE_XPM 236
There is a new variable, XAWVER, which is set to 6 when
XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4. This is also
passed to PLIST_SUB so ports that build Xaw based shared libraries
can use this variable to substitute the shlib version number.
There is also a provision of using a separate mtree file for
XFREE86_VERSION=4, but that part is not enabled yet.
Reviewed by: the ports list
Tested by: make index (XFREE86_VERSION=3 only)
(2) Add hebrew to list of valid categories.
Submitted by: nbmc6bcad2436Remove maintainership of most of my ports. I don't really have time to maintain these and I'm just not interested in these particular ones any more.10ae656be9
update with the new PORTNAME/PORTVERSION variablesa0cb9ec98b
Add WWW PR: 16236 Submitted by: Joseph Scott <joseph.scott@owp.csus.edu>f9021427c6
Id->FreeBSD rename try 2. This will make a number of things easier in the future, as well as (finally!) avoiding the Id-smashing problem which has plagued developers for so long. Boy, I'm glad we're not using sup anymore. This update would have been insane otherwise.4f4c6521c9
Remove trailing spaces, and any periods that were hidden by them.e32f86f31b
Change my email address to FreeBSD.org. Also some minor nits (extra fluff in all of my ports' DESCR files, USE_XLIB defined when USE_X_PREFIX is also defined, etc).bbed9774f9
A DockApp that shows the weather at geosynchronous orbit PR: 11173 Submitted by: Chris Piazza <cpiazza@home.net>3e55b19efe