audio/libmad0.16.4

audio/libmad: Fix building with CMake 4

Approved by:	portmgr (fixit blanket)

audio/*: remove useless USES=pathfix

audio/libmad: Update to 0.16.4

- Update MASTER_SITES
- Fix LICENSE
- Update COMMENT
- Update WWW
- Update pkg-descr
- Clean up libmad.pc patch from dependent ports

Changes:	https://codeberg.org/tenacityteam/libmad/releases

audio/libmad: Cosmetic change

audio/libmad: Unbreak fetch

Repo is now located on Codeberg

Reference: https://github.com/tenacityteam/

Approved by:	portmgr (blanket, build fix)

audio/libmad: Fix distinfo and only enable ASO on supported 32-bit platforms

Distinfo contains stale info for obsolete patch file andonly enable ASO
on armv6/v7/i386

PR:		266350
Approved by:	portmgr (maintainer timeout, 2+ weeks)

audio/libmad: Update to 0.16.3

Changes:	https://github.com/tenacityteam/libmad/releases

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

audio: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <dmagda+libsamplerate@ee.ryerson.ca>
  *  <trasz@FreeBSD.org>
  *  Adam Weinberger
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aleksander Fafula <alex@bsdguru.org>
  *  Alex Allan <alex@kamaz.org.uk>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kojevnikov <alexander@kojevnikov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexander Yerenkow <yerenkow@gmail.com>
  *  Alexandr Kovalenko <never@nevermind.kiev.ua>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Anders Nordby <anders@fix.no>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anes Mukhametov <anes@anes.su>
  *  Anthony Ginepro <anthony.ginepro@laposte.net>
  *  Anton Yuzhaninov <citrin@citrin.ru>
  *  Aragon Gouveia <aragon@phat.za.net>
  *  Ashish SHUKLA <wahjava@gmail.com>
  *  Ayumi M <ayu@commun.jp>
  *  Ayumi Mitsui <ayu@commun.jp>
  *  Bartoletti <lbartoletti@FreeBSD.org>
  *  Bernard Spil <brnrd@FreeBSD.org>
  *  Bill Fenner <fenner@FreeBSD.org>
  *  Brad Walker <tha_walka@hotmail.com>
  *  Brett Taylor <brett@peloton.physics.montana.edu>
  *  Byung-Hee HWANG <bh@izb.knu.ac.kr>
  *  Carey Jones <mcj@acquiesce.org>
  *  Carlos J. Puga Medina <cpm@FreeBSD.org>
  *  Cezary Morga <cm@therek.net>
  *  Chao Shin <quakelee@cn.freebsd.org>
  *  Charles Mercadal <mercadal@diablonet.net>
  *  Chia-liang Kao <clkao@CirX.ORG>
  *  Chip Marshall <chip@eboai.org>
  *  Choi Jun Ho <junker@moderato.snu.ac.kr>
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Christian Laursen <xi@borderworlds.dk>
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Daniel Menelkir <dmenelkir@gmail.com>
  *  Daniel O'Connor
  *  David Bushong <david@bushong.net>
  *  David Le Brun <david@dyn-ns.net>
  *  David MacKenzie <djm@pix.net>
  *  David Naylor <dbn@FreeBSD.org>
  *  David Naylor <naylor.b.david@gmail.com>
  *  David Yeske <dyeske@gmail.com>
  *  Denise H. G. <darcsis@gmail.com>
  *  Dennis Herrmann <adox@mcx2.org>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Devon Ryan <dpryan@dpryan.com>
  *  Ditesh Shashikant Gathani <ditesh@gathani.org>
  *  Dmitry Afanasiev <KOT@MATPOCKuH.Ru>
  *  Dominic Mitchell <dom@happygiraffe.net>
  *  Dominique Goncalves <dominique.goncalves@gmail.com>
  *  Dryice Liu <dryice@dryice.name>
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Edward Tomasz Napierala <trasz@pin.if.uz.zgora.pl>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Erik Cederstrand <erich@FreeBSD.org>
  *  Francisco Gomez <francisco@gomezmarin.com>
  *  Frank Laszlo <laszlof@vonostingroup.com>
  *  František Dvořák <valtri@civ.zcu.cz>
  *  Fraser Tweedale <frase@frase.id.au>
  *  Gabor Kovesdan
  *  Gabor Zahemszky <Gabor@Zahemszky.HU>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Gennady Sorokopud <gena@NetVision.net.il>
  *  George Reid <greid@FreeBSD.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Goran Mekić <meka@tilda.center>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Gustau Perez <gustau.perez@gmail.com>
  *  Hans Petter Selasky <hselasky@FreeBSD.org>
  *  Hans Petter Selasky <hselasky@freebsd.org>
  *  Hye-Shik Chang
  *  Hye-Shik Chang <perky@FreeBSD.org>
  *  Jaap Akkerhuis <jaap@NLnetLabs.nl>
  *  Jamie Heckford <jamie@blackhole.net>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jerry Eriksson <jerry@freebsd.se>
  *  Jim Mock <jim@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joao Carlos Mendes Luis <jonny@jonny.eng.br>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  John Hixson <jhixson@FreeBSD.org>
  *  John Hixson <john@pcbsd.org>
  *  Jonathan Lennox <lennox@cs.columbia.edu>
  *  Joris Vandalon <joris@vandalon.nl>
  *  Juha Erkkilä <erkkila@cc.jyu.fi>
  *  Juha Nygard <juha.nygard1@netikka.fi>
  *  Kawaguti Ginga <ginga@athena.club.ne.jp>
  *  Kengo Ichiki <kichiki@users.sourceforge.net>
  *  Koine Yuusuke(koinec) <koinec@users.osdn.me>
  *  Konstantinos Konstantinidis <kkonstan@daemon.gr>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Lars Engels <lars.engels@0x20.net>
  *  Lars Engels <lme@FreeBSD.org>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Leo Kim <leo@florida.sarang.net>
  *  Liam J. Foy <liamfoy@sepulcrum.org>
  *  Manuel Creach <manuel.creach@icloud.com>
  *  Marc van Woerkom <3d@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark Kane <mark@mkproductions.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Mark Reidel <ports@mark.reidel.info>
  *  Mark Reidel <ports@mark.reidle.info>
  *  Martin Blapp <mbr@FreeBSD.org>
  *  Martin Dieringer <Martin.Dieringer@t-online.de>
  *  Martin Kraft <martin.kraft@fal.de>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke (miwi@FreeBSD.org)
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Masanori Kiriake <seiken@nbs.co.jp>
  *  Mathew Kanner <mat@hak.cnd.mcgill.ca>
  *  Matt Tosto <datahead4@gmail.com>
  *  Matthias Andree <matthias.andree@gmx.de>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Beer <beerml@sigma6audio.de>
  *  Michael Haro <mharo@area51.fremont.ca.us>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Nottebrock <michaelnottebrock@gmx.net>
  *  Michael Vasilenko <acid@stu.cn.ua>
  *  Mike Makonnen <mtm@identd.net>
  *  Munish Chopra <mchopra@engmail.uwaterloo.ca>
  *  Mykola Dzham <i@levsha.me>
  *  Nadelyaev Stanislav <funkblaster@n11.bmstu.ru>
  *  Necati Ersen SISECI <siseci@enderunix.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nicolas Herry <nicolasherry@gmail.com>
  *  Oliver Breuninger <ob@breuninger.org>
  *  Oliver Fromme <oliver.fromme@heim3.tu-clausthal.de>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Duchateau
  *  Oyvind Moll <oyvindmo@initio.no>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pav Lucistnik <pav@oook.cz>
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Philip Paeps <philip@paeps.cx>
  *  Philippe Audeoud <jadawin@tuxaco.net>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Kubaj <emulation@FreeBSD.org$
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Putrya Statislav
  *  Rahul Siddharthan <rsidd@online.fr>
  *  Rich Neese <r.neese@gmail.com>
  *  Richard Neese
  *  Rob Zinkov <rzinkov@gmail.com>
  *  Romain Tartiere <romain@blogreen.org>
  *  Romain Tartière <romain@blogreen.org>
  *  Roman Bogorodskiy
  *  Roman Shterenzon <roman@xpert.com>
  *  Sander Janssen <janssen@rendo.dekooi.nl>
  *  Sascha Klauder <sklauder@trimind.de>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Sean McGovern <sean@sfarc.net>
  *  Sergey Akifyev <asa@gascom.ru>
  *  Seth Kingsley <sethk@osd.bsdi.com>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Simon Barner <barner@gmx.de>
  *  Stas Timokhin <stast@bsdportal.ru>
  *  Stefan Ehmann <shoesoft@gmx.net>
  *  Stefan Jahn <stefan.jahn@nemesis-sektor.de>
  *  Stefan Zehl <sec@42.org>
  *  Stepan Zastupov [RedChrom] <redchrom@gmail.com>
  *  Steve Wills <swills@FreeBSD.org>
  *  Sue Blake <sue@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  TOMIDA, Hiroaki <t.hiroaki.209 at gmail.com>
  *  Tatsuki Makino <tatsuki_makino@hotmail.com>
  *  The Anarcat <anarcat@anarcat.dyndns.org>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas M. Hermann <tmh.public@gmail.com>
  *  Thomas Runge <runge@rostock.zgdv.de>
  *  Thomas Zander <riggs@FreeBSD.org>
  *  Tilman Linneweh <arved@FreeBSD.org>
  *  Tim Bishop <tdb@FreeBSD.org>
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Tobias Rehbein <tobias.rehbein@web.de>
  *  Tyler Spivey
  *  Ulrich Spoerlein <q@uni.de>
  *  Ulrich Spoerlein <uspoerlein@gmail.com>
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vincent Tantardini <vinc@FreeBSD-fr.org>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Yanhui Shen <shen.elf@gmail.com>
  *  Yar Tikhiy <yar@FreeBSD.org>
  *  Yar Tikhiy <yar@comp.chem.msu.su>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yoichi Asai <yatt@luna2.org>
  *  Yoichi Asai <yatt@msc.biglobe.ne.jp>
  *  Yoshiaki Uchikawa
  *  Yoshihide SONODA <ysonoda@dontaku.csce.kyushu-u.ac.jp>
  *  Yuri Victorovich
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zach Zurflu <zach@pabst.bendnet.com>
  *  Zane C. Bowers
  *  Zane C. Bowers-Hadley <vvelox@vvelox.net>
  *  Zhihao Yuan <lichray@gmail.com>
  *  ache
  *  arved
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  ericb@thedeepsky.com
  *  erich@FreeBSD.org
  *  faulkner@mpd.tandem.com
  *  gahr
  *  greg
  *  hrkfrd@googlemail.com
  *  ijliao
  *  janek@gaja.ipan.lublin.pl
  *  jkh
  *  jockl <jockl@pianojockl.org>
  *  kbyanc@posi.net
  *  kwm@rainbow-runner.nl
  *  lazyklimm <lazyklimm@gmail.com>
  *  leo
  *  lx
  *  mahonmesr@googlemail.com
  *  marius nuennerich
  *  mathias.picker@gmx.de
  *  michael johnson <ahze@ahze.net>
  *  michaelnottebrock@gmx.net and lioux@FreeBSD.org
  *  mtm@identd.net
  *  nemysis <nemysis@gmx.ch>
  *  nork@FreeBSD.org
  *  nox@jelal.kn-bremen.de
  *  numisemis at yahoo dot com
  *  patrick
  *  pjm <pierrejacqes.mimifir@gmail.com>
  *  pozar
  *  pst
  *  r.neese
  *  rene@FreeBSD.org (repocopied from audio/py-mpd)
  *  sethk
  *  shanee@augusta.de
  *  sobomax
  *  squell@alumina.nl
  *  swallace
  *  t.vanklaveren@student.utwente.nl
  *  torstenb
  *  trasz <trasz@FreeBSD.org
  *  trasz <trasz@pin.if.uz.zgora.pl>
  *  trevor
  *  ugen
  *  will
  *  yoshiaki Uchikawa

With hat:	portmgr

audio/libmad: Add ACCURACY and SPEED options

The SPEED option is missing in 0.16.0 update (519c89efe3a9ddc8f3a57d1bb4940ff355086576).
Add it back via OPTIONS_SINGLE_OPTIMIZE.

audio/libmad: Set SONAME to libmad.so.0 instead of libmad.so.0.16.2

- Bump PORTREVISION of dependent ports for shlib change
- Bump PORTREVISION for package change

audio/libmad: Allow aarch64 to use 64-bit fixed point math

PR:		264937
Reported by:	diizzy

audio/libmad: Update to 0.16.2

- Add LICENSE_FILE

Changes:	https://github.com/tenacityteam/libmad/releases
		https://github.com/tenacityteam/libmad/blob/main/CHANGES

audio/libmad: Update to 0.16.1

Changes:	https://github.com/tenacityteam/libmad/releases
		https://github.com/tenacityteam/libmad/blob/main/CHANGES

audio/libmad: Clean up Makefile

- Remove PATCH* by moving to a newer snapshot

audio/libmad: Update to 0.16.0

Switch to Tenacity's fork which contains patched code for all known CVEs
and various build fixes. This also makes it easier to maintain as we're
using an active fork. Upstream has also switched to CMake.

PR:		262874
Approved by:	sunpoet (maintainer timeout 4+ weeks)

audio/libmad: Convert REINPLACE_CMD to patch file

audio/libmad: Cosmetic change

audio/libmad: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

Fix CVE-2017-8372, CVE-2017-8373 and CVE-2017-8374

- Bump PORTREVISION for package change

Differential Revision:	https://reviews.freebsd.org/D22300
Submitted by:	Daniel Engberg <daniel.engberg.lists@pyret.net>
Obtained from:	https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508133#15
Security:	b48e7b14-052a-11ea-a1de-53b029d2b061
MFH:		2019Q4

Update pkg-descr and WWW

Cleanup patches, a* categories.

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in the 32 ports that still use it.  Bump PORTREVISION on their dependent ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version.  When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.

Also remove the devel/pcre dependency from USE_GNOME=glib20.  It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it.  The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20.  Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.

PR:		195724
Exp-run by:	antoine
Approved by:	portmgr (antoine)

When linking a library libA with a library libB using libtool, if libB.la exists, libtool will add all libraries libB.la refers to (dependency_libs field) to the linker command line and store them in the dependency_libs field of libA.la.  So everything that subsequently links with libA will also link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

Fix build with clang 3.4

Submitted by:	dim

- Fix USES=libtool and revert shared library changes - Bump PORTREVISION for package change

Fix after conversion to USES=libtool

- Use USES=libtool

- Strip shared library - Do not mkdir PREFIX/libdata/pkgconfig which is already in BSD.local.dist - Use SUB_FILES - Remove unnecessary patch - Cosmetic change - Take maintainership

- Support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat: audio)

Convert from WITH to OPTIONS While here remove wrong pkgconfig dependency

- drop maintainership Feature safe: yes

- Get Rid MD5 support

Sync to new bsd.autotools.mk

- fix build with new GCC PR:		143741 Submitted by:	Rob Farmer

- Switch SourceForge ports to the new File Release System: categories starting with A

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

Use libtool port instead of included one to avoid objformat a.out botch

- USE_LDCONFIG

- take maintainership Submit:ted by: Revi:rewed by:

Reset inactive maintainer asa@gascom.ru.

Hat:		portmgr

Conversion to a single libtool environment.

Approved by:	portmgr (kris)

SHA256ify

Approved by:		krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Be sure the pkgconfig directory exists (it doesn't on not branch versions of FreeBSD).

Reported by:	GNOME Tinderbox

add knob to enable speed optimization. (maintainer timeout for two weeks.)

Submitted by:	Ingmar Gebert <ingmar.gebert@uni-rostock.de>