benchmarks/netperf 2.7.1.p20210121_2

benchmarks/netperf: Move man pages to share/man

Approved by:	portmgr (blanket)

benchmarks/netperf: Update to 20210121 version

For the most part, this complicates the build, moves the debug log from
/tmp to /var/log and changes debugging to default to off. Also:
- Don't let netserver chmod(2) /dev/null to 644 when debug log is off.
- Take back port.

Approved by:	netchild

*: reset marius@ ports after safekeeping his commit bit.

With hat:	portmgr-secretary

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

benchmarks: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey V. Degtyarev
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Shevtsov <nyxo@dnuc.polyn.kiae.su>
  *  Andrey Zakhvatov <andy@FreeBSD.org>
  *  Andy Clark <andrewclarkii@gmail.com>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Brad Davis <brd@FreeBSD.org>
  *  Bruce A. Mah <bmah@FreeBSD.org>
  *  Chao Shin <quakelee@cn.freebsd.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David O'Brien (obrien@NUXI.com)
  *  Dima Sivachenko <dima@chg.ru>
  *  Gabriel M. Dutra <0xdutra@gmail.com>
  *  Gea-Suan Lin <gslin@ccca.nctu.edu.tw>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Hannes Hauswedell <h2+fbsdports@fsfe.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Lars Eggert <lars@eggert.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  NAKAJI Hiroyuki <nakaji@jp.freebsd.org>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Pete Fritchman <petef@databits.net>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Radim Kolar
  *  Radim Kolar <hsn@sendmail.cz>
  *  Roman Bogorodskiy <bogorodskiy@inbox.ru>
  *  Scott Flatman <sf@dsinw.com>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Kandaurov <pluknet@gmail.com>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Slava Shwartsman <slavash@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Dreibholz <dreibh@iem.uni-due.de>
  *  Tom Judge <tom@tomjudge.com>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Will Andrews <andrews@technologist.com>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  arved
  *  asami
  *  dikshie <dikshie@lapi.itb.ac.id>
  *  gnn
  *  ijliao
  *  janos.mohacsi@bsd.hu
  *  jesper@jdn.dk
  *  jmz
  *  koshy
  *  luigi@FreeBSD.org
  *  mharo@FreeBSD.org
  *  mich@freebsdcluster.org
  *  mr
  *  se
  *  shalunov
  *  thierry@pompo.net
  *  trasz <trasz@pin.if.uz.zgora.pl>
  *  uminac

With hat:	portmgr

benchmarks/netperf: Update WWW

Remove # $FreeBSD$ from Makefiles.

benchmarks/netperf: Fix build with clang 11 and gcc 10

Tested using poudriere on 11.3, 12.1, 13.0

PR:		249227
Reported by:	Krzysztof Galazka
Approved by:	build fix (blanket)
Sponsored by:	Intel

Add and use a shared INFO description. I have patches to add that knob to a bunch of additional ports.

Drop the ipv6 virtual category for b* category as it is not relevant anymore

Turn installation of netperf.info into an option (default-on but allowing to get rid of the texinfo dependency).

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Given that the netperf project hasn't rolled a release in quite some time, switch to snapshots directly obtained from the github repository (currently at version 2.7.1). Generally, there aren't that many changes since the 2.7.0 release version of netperf, the most noteworthy changes are in the area of FreeBSD support, though: - FreeBSD-specific code for letting netperf/netserver bind to CPUs, e. g

Apart from that, some test scripts missing in the published releases but
referenced by test scripts already part of e. g. netperf 2.7.0 are now
included.

Options are already optional.

Sponsored by:	Absolight

Remove dead links from MASTER_SITES or WWW

Cleanup patches, category benchmarks

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

- Fix trailing whitespace in pkg-descrs, categories [a-f]*

Approved by:	portmgr blanket

- Update to 2.7.0. - Add an EXAMPLES knob. - Unbreak CPU utilization measurement support for FreeBSD >= 10 [1], unbreak   SCTP support for FreeBSD >= 10.

PR:	203752 [1]

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

Enable OMNI by default; this matches what vanilla netperf does since version 2.5 and restores bidirectional compatibility with other OS distributions following suit.

PR:		197137

Cleanup plist

- Fix check-plist by adding missing netperf.info file

Support stage

Add NO_STAGE all over the place in preparation for the staging support (cat: benchmarks)

- Given that we always build netperf with --enable-demo, remove an   irritating remark from the manual page suggesting it hasn't been. - Grab

Approved by:	bapt (mentor)

- Fix build with clang [1] - Use standard header - Convert spaces to tabs in options and descriptions - Spelling fixes in pkg-descr

PR:		ports/174887 [1]
Reported by:	Garrett Cooper <yanegomi@gmail.com> [1]

- Update to use OPTIONSNG - Trim Makefile header - Drop my maintainership

PR:		ports/173547
Submitted by:	edward
Feature safe:	yes

Upgrade to 2.6.0

1) Add OPTIONS support for: - SOCKETS - Unix domain socket support and tests - SCTP - Stream Control Transmission Protocol support and tests - EXS - ICSC async socket support - HISTOGRAM - Optional histogram output - OMNI - Enable OMNI tests

2) Patch to $WRKSRC/configure which fixes CPU measurement and ROUTE
lookup routines in netperf, which result in this output:
-------------
checking which CPU utilization measurement type to use... "none.
Consider teaching configure about your platform."
checking which route lookup type to use... "none. Consider teaching
configure about your platform."
--------------

3) Add to default configure_args

--enable-dirty
--enable-demo
--enable-burst
--enable-intervals

Note: these just add additional command arguments and options, and are
not globally enabled in netperf so wont affect existing users/tests.

Submitted by:	koobs (No email address by the request)

Make UDP_STREAM work on IPv6 by transmitting and extracting IPv6 addresses correctly.  Otherwise bind(2) calls will fail, etc.

Submitted by: bz

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

Upgrade to 2.5.0.

- Get Rid MD5 support

With hat:	portmgr (myself)

Upgrade to 2.4.5.

Upgrade to 2.4.4.

Fix pkg-plist.

Fix plist.

Upgrade to 2.4.2.

SHA256ify

Approved by:    krion@

Turn off -DHISTOGRAM as it introduces considerable overhead.  Bump portrevision.

Noticed by:	rwatson
Approved by:	sumikawa [MAINTAINER]

Upgrade to 2.3pl1.

Upgrade to 2.2pl4.

Add SIZE.

Submitted by:	trevor

Cosmetic fix: use %%DOCSDIR%% macro. No functionally changes.

Submitted by:	Oleg Karachevtsev <ok@etrust.ru>
A part of PR:	57992

Make portlint(1) happy by changing strip to ${STRIP_CMD}

Submitted by:	Oleg Karachevtsev <ok@etrust.ru>
PR:		56998

Clear moonlight beckons. Requiem mors pacem pkg-comment, And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Upgrade to 2.2pl3.

Fix typo in patch-makefile.  IPv6 was not enabled.

Upgrade to 2.2pl2.  Almost of IPv6 patch was merged but netperf still barks with -DDO_1644.