biology/p5-Bio-GFF32.0_2

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

biology: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Andrey Zakhvatov
  *  Bob Zimmermann <rpz@cse.wustl.edu>
  *  Camson Huynh <chuynh@biolateral.com.au>
  *  Dan Siercks <dsiercks@uwm.edu>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Hannes Hauswedell <h2+fbsdports@fsfe.org>
  *  J. Bacon <jwb@FreeBSD.org>
  *  Jason Bacon <jwb@FreeBSD.org>
  *  Jeremy <karlj000@unbc.ca>
  *  Johann Visagie <johann@egenetics.com>
  *  Johann Visagie <wjv@FreeBSD.org>
  *  Mauricio Herrera Cuadra <mauricio@arareko.net>
  *  Motomichi Matsuzaki <mzaki@biol.s.u-tokyo.ac.jp>
  *  Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
  *  Motomichi Matsuzaki <mzaki@m.u-tokyo.ac.jp>
  *  Motomichi Matsuzaki <mzaki@niid.go.jp>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Razi Khaja <razi@genet.sickkids.on.ca>
  *  Reed A. Cartwright <cartwright@asu.edu>
  *  Ryo MIYAMOTO
  *  Ryo MIYAMOTO <rmiya@cc.hirosaki-u.ac.jp>
  *  Sangwoo Shim <sangwoos@gmail.com>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Tassilo Philipp <tphilipp@potion-studios.com>
  *  Tony Maher
  *  Tony Maher <tonym@biolateral.com.au>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Yonatan <onatan@gmail.com>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  ballen
  *  barnhart@genetics.wustl.edu
  *  camson@bilateral.com.au
  *  chuynh@biolateral.com.au
  *  dbader@eece.unm.edu
  *  frankch@waru.life.nthu.edu.tw
  *  h2
  *  lentferj
  *  maho@FreeBSD.org
  *  mzaki@biol.s.u-tokyo.ac.jp
  *  tonym
  *  wen@FreeBSD.org

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except for where it resulted in a change in output from build-depends-list or run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Cleanup plist

- Fix PLIST - Bump PORTREVISION for package change

Reported by:	swills

- Update to 2.0

Changes:	http://search.cpan.org/dist/Bio-GFF3/Changes

- Update to 1.9 - Sort PLIST

Changes:	http://search.cpan.org/dist/Bio-GFF3/Changes

- Update to 1.8

Changes:	http://search.cpan.org/dist/Bio-GFF3/Changes

- Update to 1.7 - Support STAGEDIR

Changes:	http://search.cpan.org/dist/Bio-GFF3/Changes

Add NO_STAGE all over the place in preparation for the staging support (cat: biology)

- Pet portlint: remove blank line among *_DEPENDS

- Update to 1.6 - Convert to new perl5 framework - Changelog: http://cpansearch.perl.org/src/RBUELS/Bio-GFF3-1.6/Changes

- Update to 1.5 Changes: http://cpansearch.perl.org/src/RBUELS/Bio-GFF3-1.5/Changes

- Update to 1.4 Changes: http://cpansearch.perl.org/src/RBUELS/Bio-GFF3-1.4/Changes - Trim Makefile headers

Feature safe:	yes

Fix typos in COMMENT

- Update to 1.3

Changes:	http://search.cpan.org/dist/Bio-GFF3/Changes

- Update to 1.2 - Add LICENSE (Artistic 1 & GPL 1) - Add TEST_DEPENDS

Changes:	http://search.cpan.org/dist/Bio-GFF3/Changes

- Update to 1.0 - Reset maintainer to perl@

Feature safe:	yes

- Update to 0.7 ChangeLog: http://cpansearch.perl.org/src/RBUELS/Bio-GFF3-0.7/Changes

- Update to 0.6 ChangeLog: http://cpansearch.perl.org/src/RBUELS/Bio-GFF3-0.6/Changes

- Add missing BUILD_DEPENDS

PR:		ports/159827
Submitted by:	swills (me)
Approved by:	wen (maintainer)

- Update to 0.5 ChangeLog: http://cpansearch.perl.org/src/RBUELS/Bio-GFF3-0.5/Changes

- Update to 0.4 http://cpansearch.perl.org/src/RBUELS/Bio-GFF3-0.4/Changes

Bio::GFF3 are low-level, fast functions for parsing GFF version 3 files. All they do is convert back and forth between low-level Perl data structures and GFF3 text.

WWW: http://search.cpan.org/dist/Bio-GFF3/