cad/ifcopenshell0.7.0.231127_7

*/*: update boost consumers after boost-1.92

cad/ifcopenshell: fix with Python-3.12

Remark: I have a WIP to get rid of OpenCascade 740 and make IfcOpenShell
work with OCCT-8.0.

devel/boost: bump consumers after boost upgrade (+)

Get rid of direct dependency ob libbost_system.so, use libboost_thread.so instead

libxml2: chase libxml soversion bump

devel/boost: bump consumers after Boost update

devel/boost: bump consumers after Boost-1.87 update

Sponsored by:	Future Crew, LLC

cad/ifcopenshell: try to unbreak the port's build against new Boost

Pull two patches from upstream GitHub so that appropriate namespace
for `mt19937' is used, depending on the Boost version.

Fixes:	d56b84c1de67

cad/ifcopenshell: mark as BROKEN, fails to build with boost-1.86+

Sponsored by:	Future Crew, LLC

*/*: bump consumers after devel/boost* update

With hat:	office
Sponsored by:	Future Crew, LLC

cad/ifcopenshell: Fix build with swig 4.2.0+

PR:		279489
Obtained from:	https://github.com/IfcOpenShell/IfcOpenShell/commit/589b98053e62ee14b6817e7d2b9f5b6b527310b7

cad/ifcopenshell: unbreak the port and update to version 0.7.0.231127

Chase HTTP/1.1 301 Moved Permanently redirection in the WWW line and
disable HDF5 support for now pending some CMake-related build issues.

cad/ifcopenshell: Quiet portscout

Add PORTSCOUT restriction to avoid triggering daily message, as
upstream has daily releases.

Moved a line in the Makefile to please portlint.

PR:	279244
Reported by:	Laurent Chardon <laurent.chardon@gmail.com>

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

audio/opus: bump consumers after update to 1.4

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

*/*: Reset maintainership

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

*/*: bump all consumers after recent boost upgrade

cad/ifcopenshell: mark as BROKEN after recent boost upgrade

PR:	246106

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

cad/ifcopenshell: unbreak

Switch back to opencascade < 7.6

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

cad/ifcopenshell: add and enable PYTHON option

IfcOpenShell is mainly consumed via python (FreeCAD, Blender). So add this option and set it as default.

While here:
- update ifcopenshell 0.6.0 to latest commit (AFAIK, there is no real versioning atm) allow to build with swig >= 4
- remove patch-cmake_CMakeLists.txt (fixed upstream)

PR:		254402
Reported by:	Greg V <greg@unrelenting.technology>

Regular USE_GITHUB cleanup.

Remove DISTNAME, it is always overwritten.
Cleanup GH_TAGNAME and WRKSRC.

- Upgrade math/eigen3 to 3.3.8;

- Add some dependencies which might be detected by Find_Package but not registered;

- Bump PORTREVISION of consumers.

PR:		250833
Submitted by:	/me
Approved by:	tcberner@ (KDE / maintainer) + exp-run

- Upgrade cad/opencascade to 7.5.0   Release notes at   <https://old.opencascade.com/sites/default/files/documents/release_notes_7.5.0.pdf>

- Bump PORTREVISION of consumers.

Add compiler:c++11-lang to USES to fix build on GCC-based systems:

Target "IfcGeom_ifc2x3" requires the language dialect "CXX11" (with
  compiler extensions), but CMake does not know the compile flags to use to
  enable it.

Approved by:	portmgr (tier-2 blanket)

[NEW PORT] cad/ifcopenshell: Open source IFC library and geometry engine

IfcOpenShell is an open source (LGPL) software library for working with the
Industry Foundation Classes (IFC) file format. Currently supported IFC
releases are IFC2x3 TC1 and [IFC4 Add2 TC1].

PR:		243007
Reported by:	chitty_cloud@me.com
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D24687