cad/iverilog 13.0

cad/iverilog: Update to 13.0

cad/iverilog: Use upstream release archive

* Use upstream release archive as recommended by Porters Handbook
  This also cleans up the port Makefile a bit and reduces build
  dependencies

PR:		289579
Approved by:	maintainer timeout 2+ weeks

cad/iverilog: Move man pages to share/man

Approved by:	portmgr (blanket)

cad/iverilog: Update 11.0 → 12_0

PR:	270908
Approved by:	kbowling@

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

cad: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Andersson <anders@hack.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Christoph Moench-Tegeder <cmt@FreeBSD.org>
  *  David Yeske <dyeske@gmail.com>
  *  Diane Bruce <db@db.net>
  *  Joachim Strombergson <watchman@ludd.ltu.se>
  *  Johnny Sorocil <jsorocil@gmail.com>
  *  Julian Jenkins <kaveman@magna.com.au>
  *  Marc Fonvieille <blackend@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Martin Dieringer <martin.dieringe@gmx.de>
  *  Matthias Petermann <matthias@petermann-it.de>
  *  Michael Durian <durian@shadetreesoftware.com>
  *  Michael Reifenberger <mr@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Otacilio de Araujo Ramos Neto <otacilio.neto@bsd.com.br>
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Sarod Yatawatta <sarod@cs.pdn.ac.lk>
  *  Sergio Lenzi <lenzi.sergio@gmail.com>
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Thierry Thomas <thierry@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  gahr
  *  hrs
  *  ijliao
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  lon_kamikaze@gmx.de
  *  stas
  *  swallace
  *  thierry@pompo.net

With hat:	portmgr

cad/iverilog: Take maintainer

grimreaper: return zeising's ports to the pool after safekeeping his ports bit.

Remove # $FreeBSD$ from Makefiles.

cad/iverilog: fix build on GCC architectures

expression_evaluate.cc: In member function 'virtual bool ExpArithmetic::evaluate(Entity*, ScopeBase*, int64_t&) const':
expression_evaluate.cc:67: error: call of overloaded 'pow(int64_t&, int64_t&)' is ambiguous
/usr/include/math.h:257: note: candidates are: double pow(double, double)
/usr/include/c++/4.2/cmath:373: note:                 long double std::pow(long double, int)
/usr/include/c++/4.2/cmath:369: note:                 float std::pow(float, int)
/usr/include/c++/4.2/cmath:365: note:                 double std::pow(double, int)
/usr/include/c++/4.2/cmath:361: note:                 long double std::pow(long double, long double)
/usr/include/c++/4.2/cmath:357: note:                 float std::pow(float, float)

cad/iverilog: Update to 11.0

Update cad/iverilog to 11.0.  The first release in the 11 branch.

cad/iverilog: Use upstream patch for -fno-common

Change to use the patch applied upstream for fixing the build of
cad/iverilog with -fno-common

MFH:		2020Q3 (implicit, -fno-common fix, ok by joenum)

cad/iverilog: Fix build with -fno-common

Fix the build with -fno-common, which is the default in llvm 11 (and gcc10).

MFH:		2020Q3

cat/iverilog: Update to 10.3

Fix build with bison 3.4.1

PR:		238141

Update devel/readline to 8.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://tiswww.case.edu/php/chet/readline/CHANGES
PR:		236156
Exp-run by:	antoine

Update to 10.2

- Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOL

Approved by:	portmgr blanket

Update to 10.1.1

- Fix trailing whitespace in pkg-descrs, categories [a-f]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Update to 10.1

cad/iverilog is not jobs safe

This port has failed multiple times for me.
It intends to create a directory called "dep" and then move files into
it, but sometimes the file is moved before directory is created, becomes
renamed to "dep" and then mkdir fails because dep already exists.

Fix build on FreeBSD 9.*

FreeBSD 9.* has an older, noncompatible version of flex.  Fix this by using
flex from ports instead.

Submitted by:	kwm

Update to 10.0

Committed from:	EuroBSDCon 2015

Cleanup plist

Remove indefinite articles and trailing periods from COMMENT, plus minor COMMENT typos and surrounding whitespace fixes. Categories A-C.

CR:		D196
Approved by:	portmgr (bapt)

- Convert USE_GMAKE to USES

Update to 0.9.7.

Stagify.

Add NO_STAGE all over the place in preparation for the staging support (cat: cad)

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

Update to 0.9.6

Approved by:	kwm (mentor)

Change maintainer address to my FreeBSD.org mail address.

Approved by:	kwm (mentor)

Update maintainer email address

PR:		ports/164211
Submitted by:	Niclas Zeising <zeising@daemonic.se> (maintainer)

- Update to version 0.9.5 - Add LICENSE - Update project homepage

PR:		ports/162280
Submitted by:	Niclas Zeising <niclas.zeising@gmail.com> (maintainer)

- Update to version 0.9.4 - Give maintainership to submitter

PR:		ports/162069
Submitted by:	Niclas Zeising <niclas.zeising@gmail.com>

- Return my ports back to the pool.  I was unable to make any fixes to   my ports in the past 3 weeks while ports were broken on any 10.x   machines, which means I'm unable to maintain them.  So let people know   that there's no available support for them until things are back to   normal (which also means that anyone with spare time will be able   to fix them without getting approval).

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since mid 2008.

PR:		ports/159624
Submitted by:	Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Get Rid MD5 support

Fix a few typos in ports/cad.

- Update to 0.9.2.

- Update to 0.9.1.

- Update to 0.8.7.

- Update 0.8.6.

Migration from bison 1.x to 2.x

PR:		117086
Tested by:	-exp runs

- Update to 0.8.5.

- Update to 0.8.4.

- Update to 0.8.3

- Update to 0.8.2 - Fix compiling with gcc 4.1 - Change my email

Approved by:	sem (mentor)