cad/k40-whisperer0.71

cad/k40-whisperer: Update 0.70 => 0.71

Changelogs:
* https://www.scorchworks.com/K40whisperer/k40whisperer.html#changes

Approved by:	db@, yuri@ (Mentors, implicit)

cad/k40-whisperer: Update 0.59 => 0.70, take maintainership

Changelogs:
* https://www.scorchworks.com/K40whisperer/k40whisperer_change_log.html

* Make DOCS option actually work
* Pet portclippy(1) and portfmt(1)

Approved by:		yuri@ (Mentor)
Differential Revision:	https://reviews.freebsd.org/D53192

*/*: switch dependency from devel/py-lxml5 to devel/py-lxml

Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml  (now at version 6.0.1)

To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.

Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.

PR:		289491
Approved by:	Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
		crees, madpilot, delphij, marcus, nivit, kai,
		skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
		0mp, Eric Camachat <eric@camachat.org>

cad/k40-whisperer: Return to pool

I've not used this laser for a moment now.

all: bump PORTREVISION after updating graphics/libyuv

Using the Tools/scripts/bump_revision.pl script

*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)

This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.

It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.

This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.

Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>

PR:		287144, 288047
Reported by:	makc (via ports-committers),
		vvd (PR 288047),
		diizzy (PR 287144)
Approved by:	portmgr (chase dependency change, unbreak build)
Fixes:		230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

cad/k40-whisperer: Replace reference to PY_PILLOW with its value

Since this port works with Python 3.6 and later, the value of
PY_PILLOW doesn't change. So replace reference to it with its value.

PR:		269397
Approved by:	maintainer

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

cad/k40-whisperer: Update to 0.59

Changes:	https://www.scorchworks.com/K40whisperer/k40whisperer.html

cad/k40-whisperer: Update to 0.58

Changes:	https://www.scorchworks.com/K40whisperer/k40whisperer.html
Changes:	https://www.scorchworks.com/K40whisperer/k40whisperer_change_log.html

cad/k40-whisperer: Update to 0.57

Changes:	https://www.scorchworks.com/K40whisperer/k40whisperer.html
Reported by:	Portscout

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Unbreak bulk -a with PYTHON3_DEFAULT=3.8

PR:		253815

Follow up on graphics/py-pillow6 port removal in r559976

The graphics/py-pillow6 port was removed in r559976 as it was for
Python 2.7 only and no longer referenced in the default cases.
However it was still defined in Mk/Uses/python.mk in PY_PILLOW,
leaving a dangling reference.

Remove it from Mk/Uses/python.mk, leaving only the Python 3
version of that port, graphics/py-pillow, defined and bump the
minimal verion of Python to 3.6 for affected ports.

Update to 0.55

Update to 0.52

Change log:
- http://www.scorchworks.com/K40whisperer/k40whisperer_change_log.html
- http://www.scorchworks.com/K40whisperer/k40whisperer.html

Move devel/py-usb to devel/py-pyusb

- While I'm here:
  - Fix USE_GITHUB usage
  - Add NO_ARCH
- Bump PORTREVISION of dependent ports for dependency change

PR:		246547
Submitted by:	sunpoet (myself)
Approved by:	maintainer (timeout, 40 days)

Update to 0.45

Reported by:	portscout

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version
  requirements of Pillow for www/py-wagtail.

Release Notes:

* https://pillow.readthedocs.io/en/latest/releasenotes/index.html

Backward Incompatible Changes (7.0.0):

* https://pillow.readthedocs.io/en/latest/releasenotes/7.0.0.html#backwards-incompatible-changes

Detailed Changelog:

* https://github.com/python-pillow/Pillow/blob/7.0.0/CHANGES.rst

PR:		243665
Submitted by:	sunpoet (patch for 7.0.0 and repo-copied version)
Reviewed by:	koobs [1], sunpoet
Approved by:	koobs (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23713

Update to 0.43

Changelogs:
- http://www.scorchworks.com/K40whisperer/k40whisperer_change_log.html
- http://www.scorchworks.com/K40whisperer/k40whisperer.html

While here:
- Lint & sort variables

Reported by:	portscout

Update to 0.37

Reported by:	portscout

cad/k40-whisperer: Update to 0.36

- Remove the post-patch target as the whitespace problems were fixed
  upstream.

Reported by:	portscout

cad/k40-whisperer: Update to 0.35

Changelog:
- http://www.scorchworks.com/K40whisperer/k40whisperer_change_log.html
- http://www.scorchworks.com/K40whisperer/k40whisperer.html

- Do not set PKGNAMEPREFIX to the Python package name prefix. The software
  does not care about the underlying Python version and supporting flavors
  is not worth it in this case.
- Mark the port as working with Python 3.7.
- Set DESKTOP_ENTRIES, USES=shebangfix, and NO_ARCH.
- Put variables in order.
- Change the way files are installed so that it is easier to spot a change
  in pkg-plist in the future.
- Fix Python script indentation issues (mixed up tabs and spaces) in
  post-patch.
- Suggest the user to look in the docs directory instead of the data
  directory for notes about Linux and macOS setups.

Convert to UCL & cleanup pkg-message (categories a-c)

New port: cad/k40-whisperer

GUI control software for the stock K40 laser cutter controller

K40 Whisperer is an alternative to the Laser Draw (LaserDRW) program that
comes with some Chinese laser cutters. It reads SVG and DXF files,
interprets the data and sends commands to the K40 controller to move the
laser head and control the laser accordingly. K40 Whisperer does not
require a USB key (dongle) to function.

Features:
- Reads SVG files and DXF files.
- Splits input design based on color formatting (red, blue).
- In SVG files blue and red paths are interpreted as vectors for vector
  engraving and cutting. Everything else is transferred as a raster image.
- In DXF files blue paths are interpreted as vector engrave (blue).
  Everything else is interpreted as vector cut (red).
- Performs cuts on features inside of other features before cutting the
  outside features. (If you cut the outside first the part might drop out
  of the stock material.)
- Converts gray scale images to halftone images to simulating varying
  levels of gray (i.e. engraving pictures). The Halftone option needs to be
  selected under "Raster"-"Settings" to enable halftoning.

WWW: http://www.scorchworks.com/K40whisperer/k40whisperer.html

PR:		228466
Reviewed by:	mat (mentor)
Approved by:	mat (mentor)
Sponsored by:   Warsaw Hackerspace
Differential Revision:	https://reviews.freebsd.org/D16339