cad/openscad-devel 2026.10.23

cad/openscad-devel: Update and enable experimental features

Update to 2026.10.23 and enable experimental features

PR:		299642
Reported by:	Arthur Chance

*/*: update boost consumers after boost-1.92

cad/openscad-devel: Update to 2026.09.03

cad/openscad-devel: Update to 2026.08.23

*/*: bump consumers after devel/boost update

cad/openscad-devel: Update to 2026.07.26

cad/openscad-devel: Update to 2026.06.21

*/*: bump PORTREVISION after switching to NumPy 2.x

*/*: Switch to NumPy 2.x

PR:		294328
Exp-run:	antoine

math/py-numpy: switch all consumers to math/py-numpy1

...and bump PORTREVISIONs of consumers with hard RUN_DEPENDS

PR: 281470

cad/openscad-devel: Update to 2026.03.16

cad/openscad-devel: Fix build

Fix path to python.

cad/openscad-devel: Update to 2026.02.19

*.*: Remove useless commented PORTREVISION lines

We have compentent tools to bump PORTREVISION and don't need these
placeholders that serve no purpose other than to uglify the Makefile.

cad/freecad-devel and cad/openscad-devel are good recent examples
of where tools have been used to bump PORTREVISION, but there was
a residual commented PORTREVISION line prior to this commit.

Approved by:	portmgr (blanket)

cad/openscad-devel: Update

Update to 2025.11.20.
Add now mandatory lib3mf dependency.

cad/openscad-devel: fix build with Boost-1.89 (+)

Reported by:	fallout

devel/boost: bump consumers after boost upgrade (+)

Get rid of direct dependency ob libbost_system.so, use libboost_thread.so instead

cad/openscad-devel: Update to 2025.07.25

cad/openscad-devel: Update to 2025.07.02

cad/openscad-devel: unbreak

PR:		287283
Reported by:	mirror176@hotmail.com

cad/openscad*: Mark BROKEN

Fails to build, error: use of undeclared identifier 'buf'

Reported by:	pkg-fallout

devel/boost: bump consumers after Boost update

cad/openscad-devel: Update to 2025.05.08

In preparation to the boost 1.88 update.

cad/openscad-devel: Update to 2025.05.04 snapshot

cad/openscad-devel: Update to 2025.04.13

cad/openscad-devel: Update to 2025.04.07

Update to 2025.04.07 switch to qt6 and disable mimalloc.
Hopefully fixes segfaults as described in PR

PR:		286074

devel/boost: bump consumers after Boost-1.87 update

Sponsored by:	Future Crew, LLC

cad/openscad-devel: Update

Update to the current commit as of 2025.02.08

cad/openscad-devel: Update to current as of 2025.01.10

devel/boost: bump consu,ers after update Boost to 1.86 release

Sponsored by:	Future Crew, LLC

cad/openscad*: Remove dependency

Now since qt5-multimedia depends on alsa plugin openscad* doesnt need to

PR:		276276

*/*: Chase devel/qscintilla2 flavorization

devel/qscintilla2*: Flavorize ports

cad/openscad*: Clean up

Remove redundant audio/alsa-plugins dependency
pet portlint

Reported by:	makc@

cad/openscad*: Add dependency

Add audio/alsa-plugins as a dependency

PR:		276276
Reported by:	Greg Balfour

cad/Clipper2: Build shared lib

Switch to shared library and improve port
Bump PORTREVISION

PR:		282056
Reported by:	Daniel Engberg zzy@

cad/openscad-devel: Update

Unbreak and update to a more recent snapshot 2024.10.11

*/*: bump consumers after devel/boost* update

With hat:	office
Sponsored by:	Future Crew, LLC

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

cad/openscad-devel: Update to current 2022.12.20

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

cad/openscad-devel: Fix build

Remove qmake from USES.
Remove buildtools, add qmake_build to USE_QT.
Add two patches which got missed previously.
This should satisfy the build.

cad/openscad-devel: Update and unbreak

Update to the current state as of 2022.09.03 and try to unbreak.

*/*: bump all consumers after recent boost upgrade

archivers/libzip: Bump PORTREVISION on dependent ports

cad: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Andersson <anders@hack.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Christoph Moench-Tegeder <cmt@FreeBSD.org>
  *  David Yeske <dyeske@gmail.com>
  *  Diane Bruce <db@db.net>
  *  Joachim Strombergson <watchman@ludd.ltu.se>
  *  Johnny Sorocil <jsorocil@gmail.com>
  *  Julian Jenkins <kaveman@magna.com.au>
  *  Marc Fonvieille <blackend@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Martin Dieringer <martin.dieringe@gmx.de>
  *  Matthias Petermann <matthias@petermann-it.de>
  *  Michael Durian <durian@shadetreesoftware.com>
  *  Michael Reifenberger <mr@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Otacilio de Araujo Ramos Neto <otacilio.neto@bsd.com.br>
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Sarod Yatawatta <sarod@cs.pdn.ac.lk>
  *  Sergio Lenzi <lenzi.sergio@gmail.com>
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Thierry Thomas <thierry@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  gahr
  *  hrs
  *  ijliao
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  lon_kamikaze@gmx.de
  *  stas
  *  swallace
  *  thierry@pompo.net

With hat:	portmgr

cad/openscad-devel: mark BROKEN

Approved by:	portmgr blanket

cad/openscad-devel: Update to 2022.05.20

Use the version as of 2022.05.20