cad/qelectrotech0.100_1,1

cad/qelectrotech: Switch to Qt6

PR:		299313

cad/qelectrotech: Update 0.9.0 => 0.100

* Clarify LICENSE
* Pet portclippy(1) and portfmt(1)

Approved by:		arrowd@ (maintainer)
Approved by:	    	db@, yuri@ (Mentors, implicit)
Differential Revision:	https://reviews.freebsd.org/D55347

cad/qelectrotech: Move man pages to share/man

Approved by:	portmgr (blanket)

cad/qelectrotech: Update to 0.9.0

Reported by:	portscout!

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

cad: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Andersson <anders@hack.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Christoph Moench-Tegeder <cmt@FreeBSD.org>
  *  David Yeske <dyeske@gmail.com>
  *  Diane Bruce <db@db.net>
  *  Joachim Strombergson <watchman@ludd.ltu.se>
  *  Johnny Sorocil <jsorocil@gmail.com>
  *  Julian Jenkins <kaveman@magna.com.au>
  *  Marc Fonvieille <blackend@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Martin Dieringer <martin.dieringe@gmx.de>
  *  Matthias Petermann <matthias@petermann-it.de>
  *  Michael Durian <durian@shadetreesoftware.com>
  *  Michael Reifenberger <mr@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Otacilio de Araujo Ramos Neto <otacilio.neto@bsd.com.br>
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Sarod Yatawatta <sarod@cs.pdn.ac.lk>
  *  Sergio Lenzi <lenzi.sergio@gmail.com>
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Thierry Thomas <thierry@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  gahr
  *  hrs
  *  ijliao
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  lon_kamikaze@gmx.de
  *  stas
  *  swallace
  *  thierry@pompo.net

With hat:	portmgr

*: fix tab vs. space issues, and comments according to the guide.

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 1).

Add USES=xorg USES=gl, ports categories c

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'c'.

cad/qelectrotech: Take on maintainership.

Update cad/qelectrotech to latest upstream version.

This is prep-work for Qt 5.13; the previous version in ports, from
2015, doesn't build with the next Qt release (possibly also not
with Qt 5.12). So update it without maintaining it.

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Fix Qt5 symbol version scripts to put the catch-all clause first.  When a symbol matches multiple clauses the last one takes precedence.  If the catch-all is last it captures everything.  In the case of Qt5 libraries this caused all symbols to have a Qt_5 label while some should have Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1] https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2] https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3] https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Add DOCS options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	→https://reviews.freebsd.org/D15540

Reset vg@'s ports after he resigned.

With hat:	portmgr-secretary

Update Qt5 ports to 5.9.3.

This took quite a lot of time because Qt's own build system underwent
several changes in 5.8.0 that took a while to adapt to.

And, of course, qt5-webengine is a behemoth that we need to patch like crazy
due to its bundling of Chromium. In fact, most of the Chromium patches in
qt5-webengine have been imported with no changes from www/chromium@433510
("www/chromium: update to 56.0.2924.87").

New port: accessibility/qt5-speech

Bigger changes to Qt5 ports we had to make:
- Qt now allows using a configure.json file to define configuration options
  and specify configuration checks that can be done when qmake is invoked.
  However, configure.json checks done in a subdirectory only propagates to
  subdirectories, and checks elsewhere will fail if all .pro files are being
  parsed at once (i.e. qmake -recursive), so several ports had to switch to
  USES=qmake:norecursive along with manual additional qmake invocations in
  subdirectories in order to work. It's been mentioned in a few places such
  as Qt's bug tracker that qmake's recursive mode is pretty much deprecated,
  so we might switch to non-recursive mode by default in the future.

- Uses/qmake.mk: Introduce QMAKE_CONFIGURE_ARGS. qmake now accepts
  arbitrary options such as '-foo' and '-no-bar' at the end of the
  command-line. They can be specified in QMAKE_CONFIGURE_ARGS.

- graphics/qt5-wayland: The port can only be built if graphics/mesa-libs is
  built with the WAYLAND option, so a corresponding option (off by default)
  was added to the port.

- misc/qt5-doc: Switch to a pre-built documentation tarball. The existing
  port was not working with Qt 5.9. Instead of trying to fix it, switch to
  what Gentoo does and fetch a tarball that already contains all
  documentation so that we do not have to build anything at all. The
  tarball's name and location in download.qt.io look a bit weird, but it
  seems to work fine.

- www/qt5-webengine: Use binutils from ports, Chromium's GN build system
  generates a build.ninja that uses ar(1) with the @file syntax that is not
  supported by BSD ar, so we need to use GNU ar from binutils.

- x11-toolkits/qt5-declarative-render2d: This port was merged into the main
  Qt Declarative repository upstream, and into x11-toolkits/qt5-quick in the
  ports tree.

Changes to other ports we had to make:
- biology/ugene: Drop a '#define point "."' that is not present in more
  recent versions of the port. Defining a macro with such a common name
  causes build issues with Qt 5.9, which uses |point| as an argument name in
  methods.

- cad/qelectrotech: Fix plist with Qt 5.9. Directories are no longer
  installed with `cp -f -R', but rather `qmake install qinstall', which does
  not install

    %%DATADIR%%/elements/10_electric/20_manufacturers_articles/bosch_rexroth/.directory

  That's a local file that should not even have been part of the tarball
  anyway.

- chinese/gcin-qt5: Add additional private Qt directories (which should not
  be used in the first place) to get the port to build with Qt 5.9.

- devel/qtcreator: Fix plist with Qt 5.9. Something changed in qdoc and some
  test classes no longer generate documentation files.

- security/keepassx-devel: Import a patch sent upstream almost a year ago to
  fix the build with Qt 5.9.

Thanks to antoine for the exp-run, and tcberner and Laurent Cimon
<laurent@nuxi.ca> for landing changes in our qt-5.9 branch.

PR:		224849

Bump PORTREVISION for ports depending on the canonical version of GCC (via Mk/bsd.default-versions.mk and lang/gcc) which has moved from GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Stop exporting QT_BINDIR and QT_LIBDIR to PLIST_SUB.

As at the moment QT_BINDIR and QT_LIBDIR are 'bin' respectively 'lib' depending
on the Qt version these subs ended up at many wrong places in plists.

So only export it if QT_DIST is set.

PR:		210227
Reviewed by:	mat, rakuco
Approved by:	portmgr (mat), rakuco (mentor)
Differential Revision:	https://reviews.freebsd.org/D8378

- Update to 0.5

PR:		ports/211400
Submitted by:	6yearold@gmail.com

- Fix trailing whitespace in pkg-descrs, categories [a-f]*

Approved by:	portmgr blanket

- Add USES=desktop-file-utils shared-mime-info as suggested by stage-qa - Remove useless MAN1/MANLANG - Add manpages to pkg-plist

Approved by:	vg@FreeBSD.org (maintainer)
MFH:		2015Q3 (blanket)

Cleanup plist

Retire MANCOMPRESSED.

Also the compat NO_INSTALL_MANPAGES shim.

Differential Revision:	https://reviews.freebsd.org/D730
Reviewed by:	antoine
With hat:	portmgr
Sponsored by:	Absolight

Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Now that the default version of GCC in the Ports Collection (per lang/gcc and Mk/bsd.default-versions.mk) is GCC 4.7, replace USE_GCC=4.7+ by USE_GCC=yes.

Approved by:	portmgr (mat)

- Convert to USES=qmake (and other USES while I'm here) - Add state support - Convert LIB_DEPENDS to new style, adjust USE_QT4 components, etc.

Approved by:	portmgr (blanket approval)

The 0.3 version brings more electrical elements, more translations, texts-related improvements, a faster elements panel and custom title block templates.

- Update to 0.3
- Changed my email

Approved by:	eadler, osa, rm (mentors, implicit)

- Remove manual creation and removal of share/applications, as it's now in the mtree (categories starting with [bce])

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat: cad)

- Changed my email  - Trim Makefile headers and positions name and surname within

Approved by:	eadler, rm (mentors)

- Fix i18n manpages

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:	bapt, David Naylor (kde team)

- update png to 1.5.10

- Get Rid MD5 support

- Remove the workaround for LICENSE

Submitted by:	swell.k at gmail.com
Approved by:	pgj (mentor, implicit)

QElectroTech is a Qt4 application to design electric diagrams. It uses XML files for elements and diagrams, and includes both a diagram editor and an element editor.

WWW:	http://qelectrotech.org/

PR:		ports/146513
Submitted by:	Gvozdikov Veniamin <g.veniamin at googlemail.com>
Approved by:	pgj (mentor)