cad/verilog-mode.el801_25

Emacs Lisp ports framework: Overhaul

This overhaul introduces four key changes to the elisp ports framework:

1. Remove support for packaged byte-compiled elisp.

   The primary motivation is to remove a large number of flavor-specific
   packages and to simplify the ports tree.  As an example, supporting
   byte-compiled elisp for devel/tablist required six packages, one for
   each flavor of editors/emacs and editors/emacs-devel.  With over 100
   elisp ports and requests for new Emacs flavors, this was
   unmanageable.

2. Install configuration to integrate with Emacs's native compilation
   machinery, allowing elisp from ports to be compiled into the standard
   cache under the user's home directory.

   This matches the behavior of GNU ELPA packages and generally results
   in a faster experience.  Speedups vary depending on the
   characteristics of the elisp code, but are often reported to be 2.5
   to 5 times faster than byte-compiled code.

3. Perform byte compilation on the target host, but only when native
   compilation is unavailable.  Compilation is initiated when Emacs
   starts, and the resulting .elc files are cached under the user's
   home directory.

4. Load all autoload files installed by FreeBSD elisp ports.  This
   mirrors what package.el does for ELPA packages, ensuring that
   autoloaded functions are available without requiring users to
   explicitly load each package.

Users with elisp packages (*-emacs_*) installed should consult the
2026-04-11 UPDATING entry for instructions on handling the transition.

Reviewed by:	ashish, Benjamin Jacobs <freebsd@dev.thsi.be>, dinoex,
		mandree, mce, nobutaka, Pat Maddox <pat@patmaddox.com>,
		rhurlin
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D56001

editors/emacs: Update to 30.2

* Replace '30.1' in Mk/Uses/emacs.mk with '30.2'.
* Bump PORTREVISION of dependent ports.

ChangLog:	https://cgit.git.savannah.gnu.org/cgit/emacs.git/tree/etc/NEWS?h=emacs-30.2
Reviewed by:	jrm
Differential Revision:	https://reviews.freebsd.org/D51906

*/*: Chase editors/emacs update

Sponsored by:	The FreeBSD Foundation

Chase major version update of editors/emacs-devel

Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.

Sponsored by:	The FreeBSD Foundation

Chase editors/emacs update to 29.4

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish, yasu
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D45705

Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D44492

*/*: Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths

- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D43615

editors/emacs: Update to 29.1

* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
  TREESITTER are ON by default. PGTK and WEBP options are excluded
  from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
  result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
  result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
  via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
  and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared
  libraries.
* When PGTK option is ON and SCROLLBARS is OFF, configure fails as
  following

  ----------------------------------------------------------------------
  checking for gnutls >= 2.12.2... yes
  checking for jansson >= 2.7... yes
  checking for tree-sitter >= 0.20.2... yes
  checking for libkqueue... no
  checking for library containing kqueue... none required
  configure: error: Non-toolkit scroll bars are not implemented for your system
  ----------------------------------------------------------------------

  So add SCROLLBARS to PGTK_IMPLIES to avoid such options setting.
* When MODULES option is OFF and TREESITTER is ON, link error happens
  as following.

  ----------------------------------------------------------------------
  cc -o temacs.tmp \
    -Demacs  -I. -I. -I../lib -I../lib   -I/usr/local/include   -I/usr/local/include/librsvg-2.0 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -I/usr/local/include/gdk-pixbuf-2.0 -pthread -I/usr/local/include/cairo -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -D_THREAD_SAFE   -I/usr/local/include/libpng16  -I/usr/local/include/libxml2   -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include  -I/usr/local/include -D_THREAD_SAFE  -I/usr/local/include -D_THREAD_SAFE  -I/usr/local/include -D_THREAD_SAFE   -I/usr/local/include -D_THREAD_SAFE  -I/usr/local/include -I/usr/local/include/webp   -I/usr/local/include  -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -pthread  -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include  -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -I/usr/local/include  -I/usr/local/include -I/usr/local/include/freetype2 -I/usr/local/include/libpng16  -I/usr/local/include/harfbuzz -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include    -MMD -MF deps/.d -MP  -I/usr/local/include   -I/usr/local/include  -I/usr/local/include -I/usr/local/include/p11-kit-1   -I/usr/local/include/cairo -I/usr/local/include -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/pixman-1 -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -D_THREAD_SAFE      -Wno-switch -Wno-pointer-sign -Wno-string-plus-int -Wno-unknown-attributes -Wno-unknown-pragmas -Wno-initializer-overrides -Wno-tautological-compare -Wno-tautological-constant-out-of-range-compare -O2 -pipe  -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing  -O2 -pipe -fstack-protector-strong -isystem /usr/local/include -fno-strict-aliasing  -isystem /usr/local/include    -fstack-protector-strong -L/usr/local/lib  -L/usr/local/lib \
      dispnew.o frame.o scroll.o xdisp.o menu.o xmenu.o window.o charset.o coding.o category.o ccl.o character.o chartab.o bidi.o cm.o term.o terminal.o xfaces.o xterm.o xfns.o xselect.o xrdb.o xsmfns.o xsettings.o  dbusbind.o emacs.o keyboard.o macros.o keymap.o sysdep.o bignum.o buffer.o filelock.o insdel.o marker.o minibuf.o fileio.o dired.o cmds.o casetab.o casefiddle.o indent.o search.o regex-emacs.o undo.o alloc.o pdumper.o data.o doc.o editfns.o callint.o eval.o floatfns.o fns.o sort.o font.o print.o lread.o  syntax.o  bytecode.o comp.o  process.o gnutls.o callproc.o region-cache.o sound.o timefns.o atimer.o doprnt.o intervals.o textprop.o composite.o xml.o lcms.o kqueue.o  profiler.o decompress.o thread.o systhread.o sqlite.o  treesit.o itree.o      xfont.o ftfont.o ftcrfont.o hbfont.o  fontset.o fringe.o image.o xgselect.o json.o     terminfo.o lastfile.o      ../lib/libgnu.a      ../oldXMenu/libXMenu11.a  -ltiff -ljpeg -L/usr/local/lib -lpng16  -lgif  -L/usr/local/lib -lwebpdemux -lwebpdecoder   -lSM -lICE -lX11   -lXrender  -L/usr/local/lib -lrsvg-2 -lm -lgio-2.0 -lgdk_pixbuf-2.0 -lgobject-2.0 -lglib-2.0 -lintl -lcairo        -lrt -L/usr/local/lib -ldbus-1  -lexecinfo -L/usr/local/lib -lXrandr  -L/usr/local/lib -lXinerama  -L/usr/local/lib -lXfixes  -lXext -lXext -L/usr/local/lib -lxml2   -lutil -L/usr/local/lib -lcairo  -lncurses  -L/usr/local/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lintl  -L/usr/local/lib -lgobject-2.0 -lglib-2.0 -lintl   -L/usr/local/lib -lfreetype  -L/usr/local/lib -lfontconfig -lfreetype  -L/usr/local/lib -lharfbuzz    -L/usr/local/lib -lgnutls  -lpthread  -L/usr/local/lib -llcms2 -llcms2_fast_float -llcms2_threaded   -lm -lz   -L/usr/local/lib -ljansson  -lgmp  -L/usr/local/lib -lXi   -L/usr/local/lib -ltree-sitter  -lsqlite3 -lXcomposite -lXext
  ld: error: undefined symbol: dynlib_error
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)
  >>> referenced 1 more times

  ld: error: undefined symbol: dynlib_sym
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)

  ld: error: undefined symbol: dynlib_open
  >>> referenced by treesit.c
  >>>               treesit.o:(treesit_load_language)
  cc: error: linker command failed with exit code 1 (use -v to see invocation)
  ----------------------------------------------------------------------

  So add MODULES to TREESITTER_IMPLIES to avoid such options setting.
  * Bump PORTREVISION of ports that use "USES=emacs".

ChangeLog:	https://git.savannah.gnu.org/cgit/emacs.git/tree/etc/NEWS?h=emacs-29.1
Reviewed by:	ashish, jrm
Differential Revision:	https://reviews.freebsd.org/D41444

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

editors/emacs-devel: Update to 2022-11-28 snapshot

Bump PORTREVISION of consumers as EMACS_VER is changed to 30.0.50.

Changes:	https://github.com/emacs-mirror/emacs/compare/51589f81...7939184f

editors/emacs: Update to 28.2

* Remove FCITXPATCH option as extra-patch-src_xfns.c can't be applied
  since 28.1.
* Tidy up Makefile with portfmt.
* Bump PORTREVISION of consumers.

ChangeLog:	https://www.gnu.org/software/emacs/news/NEWS.28.2

PR:		266454
Exp-run by:	antoine
Reviewed by:	ashish, jrm
Differential Revision:	https://reviews.freebsd.org/D36613

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

cad: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Andersson <anders@hack.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Christoph Moench-Tegeder <cmt@FreeBSD.org>
  *  David Yeske <dyeske@gmail.com>
  *  Diane Bruce <db@db.net>
  *  Joachim Strombergson <watchman@ludd.ltu.se>
  *  Johnny Sorocil <jsorocil@gmail.com>
  *  Julian Jenkins <kaveman@magna.com.au>
  *  Marc Fonvieille <blackend@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Martin Dieringer <martin.dieringe@gmx.de>
  *  Matthias Petermann <matthias@petermann-it.de>
  *  Michael Durian <durian@shadetreesoftware.com>
  *  Michael Reifenberger <mr@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Otacilio de Araujo Ramos Neto <otacilio.neto@bsd.com.br>
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Sarod Yatawatta <sarod@cs.pdn.ac.lk>
  *  Sergio Lenzi <lenzi.sergio@gmail.com>
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Thierry Thomas <thierry@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  gahr
  *  hrs
  *  ijliao
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  lon_kamikaze@gmx.de
  *  stas
  *  swallace
  *  thierry@pompo.net

With hat:	portmgr

Emacs ports: Bump PORTREVISION after Emacs 28.1

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D34781

Update CONFLICTS definitions in categories a* to c*

Update the CONFLICTS definitions of ports in the following categories:

- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters

An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.

There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.

Approved by:	portmgr (implicit)

USES=emacs: Chase package name changes

PR:		259259
Differential Revision:	https://reviews.freebsd.org/D32613

*: Chase new major version (29) of editors/emacs-devel

Differential Revision:	https://reviews.freebsd.org/D32258

Remove # $FreeBSD$ from Makefiles.

editors/emacs: Update to 27.2

This is a bug-fix release with no new features.

https://www.gnu.org/software/emacs/news/NEWS.27.2

Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D27700

editors/emacs: Update to version 27.1

Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.

Port changes:

- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
  turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
  included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
  deskutils/howm, which now build

Submitted by:	HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D23966

editors/emacs-devel: Update to latest master branch commit, 4f2b415

This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.

Submitted by:	ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23012

Convert to UCL & cleanup pkg-message (categories a-c)

- Update WWW

Approved by:	portmgr blanket

USES=emacs ports: Bump PORTREVISION for editors/emacs 26.1 upgrade

Or, mark ports that fail to build as BROKEN.
https://lists.freebsd.org/pipermail/freebsd-ports/2018-May/113518.html

Flavorize and modernize Emacs ports

- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
  editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
  subshell
- Silence some portlint warnings

[1] By not depending on base texinfo

PR:		225404
Reviewed by:	antoine
Approved by:	portmgr (mat) ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D13506

Chase Emacs update

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

- Chase GNU Emacs updates

PR:		199553

Remove Authors from pkg-descr

- Chase GNU Emacs updates

PR:		194624

Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat: cad)

Rely on bsdtar to autodetermine the format of the distfiles when possible

For a while now bsdtar is able to autotermine compression and archive format.
Let's then use tar directly instead of piping to tar.

Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format

GNU Emacs updates

editors/emacs:
 - Update to 24.3
 - Update CANNA patchset[1]
 - Unbreak ARM support by using the patch from emacs-devel port
 - Add missing INSTALLS_ICONS[2]
 - Remove a patch which is already integrated upstream
 - Fix Makefile header

editors/emacs-devel:
 - Update to bzr revision 112178
 - Fix Makefile header
 - Add missing INSTALLS_ICONS[2]

editors/emacs23:
 - Remove ABI versions from LIB_DEPENDS
 - Fix Makefile header
 - Add missing INSTALLS_ICONS[2]

Mk/bsd.emacs.mk:
 - Update major version for editors/emacs port

*:
 - Bump PORTREVISION to chase Emacs updates

PR:		ports/177428[2]
Submitted by:	Yuji TAKANO[1] (via private email), bdrewery[2]

Style: tab -> space.

Most contributors copy an existing port when writing their own so reduce the number of bad examples in the tree.

Chase Emacs updates

- Remove some empty files

- Update to 801

PR:		170139
Submitted by:	Ports Fury

Update to 790

PR:		ports/166209
Submitted by:	Lowell Gilbert <lowell@be-well.ilk.org>

- Return my ports back to the pool.  I was unable to make any fixes to   my ports in the past 3 weeks while ports were broken on any 10.x   machines, which means I'm unable to maintain them.  So let people know   that there's no available support for them until things are back to   normal (which also means that anyone with spare time will be able   to fix them without getting approval).

- Get Rid MD5 support

- Fix pkg-plist.

- Add port for verilog-mode.el, Emacs Verilog editing mode.

WWW:	http://www.veripool.org/wiki/verilog-mode