chinese/enscript1.6.6_4

*/*: Bump PORTREVISION for Ghostscript 10 change

Reported by:	sunpoet
Approved by:	jrm (mentor), sunpoet
Differential Revision:	https://reviews.freebsd.org/D42412

chinese: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <intron@intron.ac>
  *  Bo-Yi Wu <appleboy.tw@gmail.com>
  *  Chih-Hsin Chang <chihhsin@cs.nctu.edu.tw>
  *  Ching-Hong Wu <woju@freebsd.ntu.edu.tw>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Eric L. Camachat <eric@camachat.org>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  G. Adam Stanislav <adam@whizkidtech.net>
  *  Gasol Wu <gasol.wu@gmail.com>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Henry Hu <henry.hu.sh@gmail.com>
  *  Jie Gao <gaoj@cpsc.ucalgary.ca>
  *  Jing-Tang Keith Jang <keith@FreeBSD.org>
  *  Joe Horn <joehorn@gmail.com>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kuang-che Wu <kcwu@csie.org>
  *  Michael C . Wu <keichii@iteration.net>
  *  Michael C. Wu
  *  Ming-I Hseh <PA@FreeBSD.Ntu.edu.TW>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Shell Hung <shell@shellhung.org>
  *  Shen Chuan-Hsing
  *  Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yen-Shuo Su <yssu@CCCA.NCTU.edu.tw>
  *  Yin-Jieh Chen <yinjieh@csie.nctu.edu.tw>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Zhang Shu
  *  Zhihao Yuan <lichray@gmail.com>
  *  blubee <hello@blubee.me>
  *  buganini@gmail.com
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  clive
  *  clsung
  *  clsung@dragon2.net
  *  gugod@gugod.org
  *  hrs
  *  ijliao
  *  vanilla@

With hat:	portmgr

Fix CONFLICTS_INSTALL in categories cad and chinese

Approved by:	portmgr (implicit)

Update CONFLICTS definitions in categories a* to c*

Update the CONFLICTS definitions of ports in the following categories:

- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters

An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.

There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.

Approved by:	portmgr (implicit)

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
cannot conflict with itself (due to logic in bsd.port.mk that
supresses the pattern match result in that case).

A few ports that set the conflicts variables depending on complex
conditions (e.g. port options), have been left unmodified, despite
probably containing outdated package names.

These changes should only affect the installation of locally built
ports, not the package building with poudriere. They should give an
early indication of the install conflict in cases where currently
the pkg command aborts an installation when it detects that an
existing file would be overwritten,

Approved by:	portmgr (implicit)

Remove # $FreeBSD$ from Makefiles.

Convert to UCL & cleanup pkg-message (categories a-c)

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

- Don't cat pkg-message from Makefiles

Approved by:	portmgr blanket

Drop maintainership as I no longer use these software nor have time and energy to keep up.

Rename chinese/ patch-xy patches to reflect the files the modify.

Staging support

Add NO_STAGE all over the place in preparation for the staging support (cat: chinese)

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl since version 8.57. The leading ghostscript is the -gpl one.

Approved by:	portmgr (pav)

Change to my FreeBSD.org email.

Approved by:	delphij (mentor)

Don't duplicate bsd.port.mk.

PR:		77492
Submitted by:	Rong-En Fan <rafan@infor.org>

Fix slave port: don't use gmake.

Submitted by:	kris	(pointyhat)

Unbroken it, and assign MAINTAINER to submitter.

PR:		ports/66595
Submitted by:	Rong-En Fan <rafan_at_infor.org>
No Responsed:	keith@

These broken ports are scheduled for deletion on June 18 if they are still broken at that time and no PRs have been submitted containing a fix.

BROKEN: Fails to patch

Use the new ghostscript options.

Submitted by:	linimon

Back out revision 1.6 which was committed by mistake; the change in it was picked up by a spurious commit of mine to chinese/*/Makefile. Sorry about that.  If anyone has had ghostscript dependency problems while trying to install this port, please try it again now.

statue@freebsd.sinica.edu.tw has asked for all the maintained ports to be reset to ports@FreeBSD.org.  We're sorry to see you go and want to thank you for your help in the past.

PR:		ports/59515
Submitted by:	statue@freebsd.sinica.edu.tw

[PATCH] chinese/enscript: enable choose of ghostscript interpreter

This patch allows the admin of the machine to choose either
	print/ghostscript-gnu or print/ghostscript-afp1

PR:		ports/54920
Submitted by:	Jens Rehsack <rehsack@liwing.de>

Reroute dependency on defunct chinese/ghostscript6 port and redirect to print/ghostscript-gnu (see ports/39684)

Submitted by:	'make index' failing for a while

Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command; the ECHO macro is set to "echo" by default, but it is set to "true" if make(1) is invoked with the -s option while ECHO_CMD is always set to the echo command.

Use command macros where appropriate.

Ports policy:

Ensure that the master category is always matches name of the parent
 (category) directory. This is required for ORIGIN to function properly.

Initial version.

This port adds Chinese support to enscript, which means it can convert
a BIG5/CNS plain text to a PS document, with all the fancy features
provided by enscript.  Unlike bg5ps, it can't manage GB yet, but it's
easy to add.  Another useful feature is with the ps2pdf and zh-ghostscript6,
it is now possible to generate font-embedded Chinese pdf document from
plain text on the fly, which also means platform-independent.

Due to some problems in the CMap files provided by Adobe, Eten-B5-H and
B5-H CMaps are unable to map correct ascii glyphs in TTFs.  BIG5 users
are suggested to use B5pc-H for the time being.

Maybe it's time to re-organize ports/chinese/* font relationships.