chinese/scim-pinyin0.5.92_4

chinese/*: remove useless USES=pathfix

chinese/scim-pinyin: Fix build with llvm16

- Pet portclippy
- Utilize USES=localbase

Sponsored by:	The FreeBSD Foundation

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

chinese: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <intron@intron.ac>
  *  Bo-Yi Wu <appleboy.tw@gmail.com>
  *  Chih-Hsin Chang <chihhsin@cs.nctu.edu.tw>
  *  Ching-Hong Wu <woju@freebsd.ntu.edu.tw>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Eric L. Camachat <eric@camachat.org>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  G. Adam Stanislav <adam@whizkidtech.net>
  *  Gasol Wu <gasol.wu@gmail.com>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Henry Hu <henry.hu.sh@gmail.com>
  *  Jie Gao <gaoj@cpsc.ucalgary.ca>
  *  Jing-Tang Keith Jang <keith@FreeBSD.org>
  *  Joe Horn <joehorn@gmail.com>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kuang-che Wu <kcwu@csie.org>
  *  Michael C . Wu <keichii@iteration.net>
  *  Michael C. Wu
  *  Ming-I Hseh <PA@FreeBSD.Ntu.edu.TW>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Shell Hung <shell@shellhung.org>
  *  Shen Chuan-Hsing
  *  Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yen-Shuo Su <yssu@CCCA.NCTU.edu.tw>
  *  Yin-Jieh Chen <yinjieh@csie.nctu.edu.tw>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Zhang Shu
  *  Zhihao Yuan <lichray@gmail.com>
  *  blubee <hello@blubee.me>
  *  buganini@gmail.com
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  clive
  *  clsung
  *  clsung@dragon2.net
  *  gugod@gugod.org
  *  hrs
  *  ijliao
  *  vanilla@

With hat:	portmgr

*/scim*: Update WWW

Remove # $FreeBSD$ from Makefiles.

Convert to UCL & cleanup pkg-message (categories a-c)

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

By default libtool replaces -export-symbols <file> with -retain-symbols-file <file> on ELF systems, but this doesn't really do what -export-symbols is meant to do.  On GNU ELF systems it converts <file> to a simple version script first and then uses -version-script instead of -retain-symbols-file. Let USES=libtool patch libtool scripts to do this on all systems with GNU ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.

japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything.  Just don't hide anything at all
like the textproc/scim configure script does.

multimedia/schroedinger: Apply an upstream patch.

textproc/scim-input-pad: Same as japanese/scim-honoka.

PR:		201922
Approved by:	portmgr (antoine)
Exp-run by:	antoine

- Add LICENSE - Strip libraries - Use options helpers

Cleanup plist

Reset maintainership

textproc/scim: - Add USES=libtool and bump dependent ports - Add INSTALL_TARGET=install-strip

Convert to USES=libtool.

Add stagedir support.

Approved by:	 portmgr (blanket infrastructure)

Add NO_STAGE all over the place in preparation for the staging support (cat: chinese)

Add an explicit dependency on pkgconf

- Convert USE_ICONV=yes to USES=iconv - Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- Update to 0.5.92 - Add OPTIONS for NLS - Remove SKIM support since textproc/skim has been marked as deprecated - Remove unused CONFIGURE_ENV in Makefile and overdated patch files - Take maintainership

PR:		ports/174862
Approved by:	swills (mentor)

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or   RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned   about for a while.

PR:		ports/168208
Approved by:	portmgr (miwi)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS) - Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:		157936
Submitted by:	myself
Exp-runs by:	pav
Approved by:	pav

- Get Rid MD5 support

Sync to new bsd.autotools.mk

- update to 1.4.1 Reviewed by:	exp8 run on pointyhat Supported by:	miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting with B,C

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped or updated Requested by:	edwin

- Remove conditional checks relevant only on FreeBSD 5.x and older

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix plist after upgrading scim to 1.4.5. scim-1.4.5 appended its version to the moduledir in scim.pc.

Reset gaoj@cpsc.ucalgary.ca due to maintainer-timeouts and no response to email.

Hat:		portmgr

- Fix error described in "http://lists.freebsd.org/pipermail/freebsd-questions/2006-March/114548.html".

PR:		ports/106932
Submitted by:	philippe sam-long <philippe.sam-long@laposte.net>

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the new freetype2 where needed.

Submitted by:	mezz, ahze, pav, and many others
Approved by:	portmgr (implicit, kris)

Fix up a little more post-libtool fallout

Submitted by:	various
Approved by:	portmgr (implicit)

Conversion to a single libtool environment.

Approved by:	portmgr (kris)

Update to 0.5.91. Add new optional skim setup module (WITH_SKIM).

PR:		ports/93165
Submitted by:	Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

SHA256ify

Approved by:    krion@

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

SCIM updated to 1.4.2. o Update scim 1.4.2. [1] o Update skim 1.4.2. [1] o Update scim-uim 0.1.4. [2] o Bump PORTREVISION in scim related ports.

Approved by:	Jie Gao <gaoj@cpsc.ucalgary.ca> [1]
Approved by:	Seiya Yanagita <s_yanagita@ybb.ne.jp> [2]

o Update to 1.4.0. o Chase bump libversion to slave ports .

PR:		ports/84247
Submitted by:	Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

o Update   ports/textproc/scim 1.2.0 --> 1.2.2   ports/textproc/skim 1.2.0 --> 1.2.2 o Chase scim's library bump.

PR:		ports/80848
Submitted by:	Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

- it doesn't need extra-patch-4-stable in 0.5.0

PR:		78265
Submitted by:	maintainer

Bump PORTREVISION to chase the glib20 shared lib version change.