comms/gammu1.42.0_1

comms/gammu: moved manpages to share/man

Update cmake arg INSTALL_MAN_DIR and fix plist
Reorder and reformat Makefile to make linters happy

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

comms: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  'Big Bad Bob' Frazier <bobf@mrp3.com>
  *  <mr@freebsd.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Dolgov <fox@furry.spb.ru>
  *  Andrey Lykhin <lan31@inbox.ru>
  *  Anton Voronin <anton@urc.ac.ru>
  *  Brandon S. Allbery KF8NH <allbery@ece.cmu.edu>
  *  Brian Dean <bsd@FreeBSD.org>
  *  Bruce Cran <bruce@cran.org.uk>
  *  Carl Makin <carl@stagecraft.cx>
  *  Darren <igla@batterybackups.net>
  *  David
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Devon H. O'Dell <devon.odell@coyotepoint.com>
  *  Diane Bruce <db@db.net>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Felix Palmen <felix@palmen-it.de>
  *  Frank Steinborn <steinex@nognu.de>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Janos.Mohacsi@bsd.hu
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeffrey Baitis <jeff@baitis.net>
  *  Johan Strom <johan@stromnet.se>
  *  Johan Strom <johna@stromnet.se>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julian Stacey <jhs@FreeBSD.org>
  *  Kirill Bezzubets <kirill@solaris.ru>
  *  MITA Yoshio <mita@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Matt Dawson <matt@mattsnetwork.co.uk>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Reifenberger (mike@Reifenberger.com)
  *  Mike Heffner <mikeh@FreeBSD.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicole Reid <root@cooltrainer.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Gardella <patrick@FreeBSD.org>
  *  Paul Traina <pst@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Rick Elrod <codeblock@eighthbit.net>
  *  Rodrigo Osorio <rodrigo@FreeBSD.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Staffan Ulfberg <staffanu@multivac.fatburen.org>
  *  Stephen Hurd <shurd@FreeBSD.org>
  *  Steve Woodford <scw@netbsd.hut.fi>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunry Chen <sunrychen@gmail.com>
  *  Søren Straarup <xride@x12.dk>
  *  Tony Shadwick <tshadwick@oss-solutions.com>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vladimir Grebenschikov
  *  Vladimir Kondratyev <wulf@FreeBSD.org>
  *  db
  *  dirkx@webweaving.org
  *  dom@happygiraffe.net
  *  elbarto@ArcadeBSD.org
  *  hm
  *  jmz
  *  joes@seaport.net
  *  lambert@lambertfam.org
  *  nox@FreeBSD.org
  *  obrien@cs.ucdavis.edu
  *  rkw
  *  shurd
  *  shurd@FreeBSD.org
  *  wlloyd@slap.net
  * //www.tomek.cedro.info)

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

comms/gammu: upgrade to 1.42.0

Major changes:
 - Fixed compilation on some non GNU systems.
 - Localization updates.
 - Improved CNMI command compatibility for AT module.
 - Improved getting of network and manufacturer information in AT module.
 - Improved compatibility with D-Link modems that need to power on.
 - Dropped Python 2 compatibility from utility scripts.
 - Fixed bug in deleting SMS messages.

Full changelog: https://fr.wammu.eu/news/2020/10/03/gammu-1-42-0/

comms/gammu: update to 1.41.0

Changelog: https://wammu.eu/download/gammu/1.41.0/

 * Documentation improvements.
 * Updated MySQL script to be compatible with current server versions.
 * Fixed SMSD operation on phones with more SMS folders.
 * Fixed off by one in Python example script.
 * Fixed PostgreSQL compilation on openSUSE.
 * Several compatibility fixes with recent compilers.
 * Improved USSD support.
 * Localization updates.

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Upgrade comms/gammu from v1.39 to 1.40

Full list of changes:
 * Added SMSD configuration option RetryTimeout.
 * Removed non configurable sleep after failed message send.
 * SMSD now tries to store whole decoded text for concatenated messages in the first entry in database.
 * Improved compatibility with Sierra SL8084TR.
 * Added support for delivery reports stored in SR memory.
 * Configure CNMI parameters for AT driver.

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Fix build on gcc-based archs.

PR:		231464
Submitted by:	Piotr Kubaj
Approved by:	portmgr (tier-2 blanket)

misc/openhab2 comms/gammu: Bump

I didn't bump them in r469511 and r469512 because they were previously broken
such that they couldn't be installed.

Reported by:	mat

comms/gammu: Unbreak: add missing files to pkg-config

Approved by:	portmgr (port compliance, infrastructure)

Update Gammu to v1.39

Changelist :
 Fixed answering call in AT module.
 Improved support for Huawei E392 and E3131.
 Fixed compatibility of binaries with Windows XP and 2003.
 Improved support for ZTE MF667.
 Updated list of GSM networks and countries.

- Update WWW

Approved by:	portmgr blanket

Update to 1.38.4 Fix various compilation issues in python-gammu on Windows. Improved support for Huawei E3531 and E1756. Fixed several issues with using library on Windows.

Update gammu to 1.38.2 and take maintenership for this port

Update to 1.38.1.

Update to 1.38.0 Convert mysql to USES Make patches with "make makepatch"

Update to 1.37.91.

Update to 1.37.3.

Update to 1.37.2

PR:		208863
Submitted by:	tkato432 yahoo com
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

1: Update to 1.37.0.2 2: remove RUN_DEPENDS to devel/cdialog.

Upgrade to 1.36.8.

- Add LICENSE_FILE - Pet portlint

To the pool: do not use the port any more and have no spare time to maintain it.

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

cleanup plist

Cleanup plist

- Convert ports from cad/, chinese/, comms/ and converters/ to new   USES=python

Approved by:	portmgr (implicit)

Acually bash should present at _configure_ time, so the port build/install a bash completion file. Restore BUILD_DEPENDS upon bash for non-default BASH option.

Reported by:	Łukasz Wąsikowski <lukasz@wasikowski.net> (via e-mail)

. let drop privileges at gammu-smsd;  [1] . support STAGE; . add LICENSE (GPLv2); . add ftp/curl to LIB_DEPENDS; . add pkgconfig, shebangfix to USES; . use /bin/sh instead /bin/bash at two scripts; . add USE_LDCONFIG=yes (the port installs shared libs); . remove bash from BUILD_DEPENDS (bash completion does not need it); . bump PORTREVISION.

PR:		ports/187110  [1]
Submitted by:	Lukasz Wasikowski <lukasz@wasikowski.net>  [1]

Add NO_STAGE all over the place in preparation for the staging support (cat: comms)

. update to 1.33.0; . check for "${PORT_OPTIONS:MDOCS}" rather then "! ${PORT_OPTIONS:MDOCS}"   since both conditions are used.

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

- convert USE_CMAKE to USES - while here clean up some ports from CMAKE_VERBOSE, which is intended   for users

Approved by:	portmgr (miwi)

Use the standard option for bash completion script (BASHCS -> BASH).

. convert to new options style;  [1] . trim headers; . place post-patch: target before post-install: one.

Spotted by:	bapt (at freebsd-ports@)  [1]

. comms/gammu: update to version 1.32.0; . deskutils/wammu: bump PORTREVISION (gammu shlib version has changed).

Update to version 1.31.0. ChangeLog since 1.30.0:

20111221 - 1.31.0

[-] * Fixed compilation with latest libusb.
[-] * Improved error handling in SQL backend of SMSD.
[-] * SMSD documentation improvements.
[-] * Indonesian translation updates.

20111213 - 1.30.92

[-] * Improved vCard parser to better handle location for various fields, thanks to Vladimir Serbinenko for initial patch.
[-] * Fixed reading calls from some Nokia phones (bug #1553).
[-] * Improved text mode SMS parsing in AT driver, thanks to Vladimir Serbinenko.
[-] * Use glib's MD5 implementation if available.

20111129 - 1.30.91

[+] * Improved documentation for configuring Gammu.
[-] * Fixed parsing birthday from vCard in some cases.
[+] * Added option not to use configured logging in SMSD inject and monitor (bug #1539).
[+] * Added SMSD configuration LogFacility (bug #1539).
[-] * Fixed reading of data from OBEX phones (LP#891803).
[-] * Fixed double reply detection (bug #1544).
[-] * Increase maximal number of caller groups (bug #1541).
[-] * Cancel all calls on maketerminated call if we don't get call ID.
[-] * Fixed SMSC handling in some cases in SMSD (bug #1547).

20111107 - 1.30.90

[-] * Various documentation improvements.
[-] * Detect Alcatel style reply on CPIN response (bug #1502).
[-] * Fix build on some Win32 systems (bug #1496).
[-] * Make jadmaker handle names with spaces (Rapha\xc3\xabl Droz).
[-] * Display 8-bit messages in hex (Nicolas Pitre).
[-] * Do not use AT+CUSD=2 on some phones (bug #1508).
[-] * Fixed gammu-monitor with Windows service (bug #1515).
[-] * Cleanup of contrib directory.
[-] * Better support for Samsung AT phones (bug #1513).
[-] * Fixed handling of MMS notification SMSes (bug #1530).
[-] * Fixed CPIN reply handling (bug #1532).
[+] * SMSD checks for PIN status just after connect (bug #1532).
[-] * Fixed various MSVC compilation issues.

- Get rid FreeBSD 6.X support

Create an OPTION to install a bash completion script (off by default). Do not install the script when this option is disabled. I.e. even if bash is installed one should define the option "on" (or define the environment option WITH_BASH) to install the script.

PR:		ports/158840 (based on)
Submitted by:	Ruslan Mahmatkhanov <cvs-src@yandex.ru>

. update to version 1.30.0; . remove patches taken from HEAD repository.

1. Incorporate a patch from the development repository to fix an error: ----- Scanning dependencies of target sqlreply > Building C object contrib/sqlreply/CMakeFiles/sqlreply.dir/c/michal.o > /usr/ports/comms/gammu/work/gammu-1.29.0/contrib/sqlreply/c/michal.c:16:25: error: mysql/mysql.h: No such file or directory ----- The error occures only if a mysql port/package is installed.

2. Bump PORTREVISION.

Pointed out by:	Ruslan Mahmatkhanov <cvs-src@yandex.ru> (via freebsd-ports@)

Add following meta-variables: . USE_GNOME=glib20  (yea, it's needed now, *sigh*); . USE_PYTHON=yes    (so do python, comms/gammu-python is redundant now); . USE_GETTEXT=yes. Remove: . USE_GNOME=pkgconfig (superseeded by USE_GNOME=glib20).

Update to version 1.29.0. Changes: http://wammu.eu/download/gammu/1.29.0/

Feature safe:	yes

This is a no-op change, just "make update-patches" (new patches pending).

Feature safe:	yes

Update to version 1.28.0.