comms/openobex1.7.2_1

comms/openobex: fix plist after devel/doxygen update

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

comms/openobex: Add CPE information

Approved by:	portmgr (blanket)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Fix plist after doxygen update in r560752.

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

- Update openobex to 1.7.2 - Remove obsolete master site - Regenrate patches

- Update devel/doxygen to 1.8.12 - Adjust plist of ports depending on it

PR:		212869

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

- Add sourceforce to MASTER_SITES - Update WWW line in pkg-descr

Add USES=pathfix support for CMake.  Some ports that use CMake to build already had USES=pathfix, although it did nothing.  For those ports, I either removed it as they were handling the pkgconfig files differently or I removed patches and substitutions that accomplished the same thing as pathfix.

Differential Revision:	https://reviews.freebsd.org/D850
Reviewed by:	antoine, bapt, tijl
Approved by:	portmgr (bapt)

Update devel/doxygen to 1.8.9

PR:		ports/196342
Submitted by:	Naram Qashat (maintainer)
Exp-run and fixes to depending ports:	self

Cleanup plist

Update devel/doxygen to 1.8.7 Update dependent ports to build with it

Most of work by:	pi@
Exp-run:	self
PR:		ports/190943

Convert to USES=dos2unix

With hat:	portmgr

- Support staging - Use options helpers

Add NO_STAGE all over the place in preparation for the staging support (cat: comms)

- Update to 1.7.1 - Remove obsolete MAKE_JOBS_SAFE (default now)

Fix comparison in patch from my previous commit.

- Take advantage of accept4() in recent CURRENT [1] - Fix plist when DOXYGEN option is not enabled

Suggested by:	jilles [1]

- Fix runtime problem on CURRENT after r248534

Reviewed by:	jilles
Feature safe:	yes

- convert USE_CMAKE to USES - while here clean up some ports from CMAKE_VERBOSE, which is intended   for users

Approved by:	portmgr (miwi)

Use USES=pathfix instead of gnomehack

- Make DOXYGEN option default only when mass building packages - Bump PORTREVISION

Requested by:	danfe

- Fix plist when DOXYGEN option is enabled but DOCS is not - Enable DOXYGEN option by default - Bump PORTREVISION

Reported/Requested by:	makc

- Update to 1.7 - Add DOXYGEN option, disabled by default to keep the port slim - Remove check unsupported FreeBSD versions - Change tab to space in WWW line

Trim Makefile headers for ports I maintain.

- Update openobex to 1.6 - Update project home page url - Bump PORTREVISION on obexapp due to shlib version change - While I'm here, remove ABI version numbers from LIB_DEPENDS

Requested by:	Dru Lavigne <dru.lavigne@gmail.com>
Approved by:	crees (mentor)

- Convert to new options framework - Remove uneeded double quotes - While here fix various portlint warnings - Indent make conditionals and loop

Approved by:	Boris Samorodov <bsam@FreeBSD.org> (net/unison-nox11 maintainer)
Approved by:	Matthias Andree <mandree@FreeBSD.org> (implicit, net/unison232 maintainer)
Approved by:	tabthorpe (mentor)

Change to my FreeBSD.org email address.

Approved by:	crees (mentor)

- Remove WITH_FBSD10_FIX, is no longer needed

Fix build with FreeBSD 10

Approved by:	portmgr (miwi)

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

- Get Rid MD5 support

- Switch to using new MASTER_SITE_KERNEL_ORG

PR:		ports/134566
Submitted by:	Eygene Ryabinkin <rea-fbsd@codelabs.ru>
Approved by:	Guido Falsi <mad@madpilot.net> (maintainer)

- Mark MAKE_JOBS_SAFE for SMP compilation

PR:		133067
Submitted by:	Guido Falsi <mad@madpilot.net> (maintainer)

- Chase libusb20 rename in r189585. - Mark sane-backends broken on current due to changes   in USB stack.

Reviewed by:	thompsa (old version), miwi
Tested by:	miwi

- Update to 1.4 - Add USB support (adopted from ports/128776)

PR:		128979
Submitted by:	Alex Samorukov <samm at os2 dot kiev dot ua>
Approved by:	Guido Falsi <mad at madpilot dot net> (maintainer)

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:	exp build run (erwin)

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:		ports/116639
Submitted by:	aDe

- Patch Makefile.in pre-configure

Reported by:	pointyhat

Restore patches to fix build.

PR:		ports/106357
Submitted by:	pluknet <pluknet@gmail.com>
Approved by:	Guido Falsi <mad@madpilot.net> (maintainer)

Update to version 1.3 Patches applied upstream

PR:		ports/105854
Submitted by:	Matthew West <mwest@uct.ac.za>
Approved by:	Guido Falsi <mad@madpilot.net> (maintainer)

Conversion to a single libtool environment.

Approved by:	portmgr (kris)

SHA256ify

Approved by:    krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Respect CFLAGS

PR:		ports/74199
Submitted by:	Simon Barner via maintainer

- Remove patch file which proved to not work [1] - Portlint

Submitted by:	maintainer [1]