comms/p5-Device-SerialPort1.040000_2

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

comms: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  'Big Bad Bob' Frazier <bobf@mrp3.com>
  *  <mr@freebsd.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Dolgov <fox@furry.spb.ru>
  *  Andrey Lykhin <lan31@inbox.ru>
  *  Anton Voronin <anton@urc.ac.ru>
  *  Brandon S. Allbery KF8NH <allbery@ece.cmu.edu>
  *  Brian Dean <bsd@FreeBSD.org>
  *  Bruce Cran <bruce@cran.org.uk>
  *  Carl Makin <carl@stagecraft.cx>
  *  Darren <igla@batterybackups.net>
  *  David
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Devon H. O'Dell <devon.odell@coyotepoint.com>
  *  Diane Bruce <db@db.net>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Felix Palmen <felix@palmen-it.de>
  *  Frank Steinborn <steinex@nognu.de>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Janos.Mohacsi@bsd.hu
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeffrey Baitis <jeff@baitis.net>
  *  Johan Strom <johan@stromnet.se>
  *  Johan Strom <johna@stromnet.se>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julian Stacey <jhs@FreeBSD.org>
  *  Kirill Bezzubets <kirill@solaris.ru>
  *  MITA Yoshio <mita@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Matt Dawson <matt@mattsnetwork.co.uk>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Reifenberger (mike@Reifenberger.com)
  *  Mike Heffner <mikeh@FreeBSD.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicole Reid <root@cooltrainer.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Gardella <patrick@FreeBSD.org>
  *  Paul Traina <pst@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Rick Elrod <codeblock@eighthbit.net>
  *  Rodrigo Osorio <rodrigo@FreeBSD.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Staffan Ulfberg <staffanu@multivac.fatburen.org>
  *  Stephen Hurd <shurd@FreeBSD.org>
  *  Steve Woodford <scw@netbsd.hut.fi>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunry Chen <sunrychen@gmail.com>
  *  Søren Straarup <xride@x12.dk>
  *  Tony Shadwick <tshadwick@oss-solutions.com>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vladimir Grebenschikov
  *  Vladimir Kondratyev <wulf@FreeBSD.org>
  *  db
  *  dirkx@webweaving.org
  *  dom@happygiraffe.net
  *  elbarto@ArcadeBSD.org
  *  hm
  *  jmz
  *  joes@seaport.net
  *  lambert@lambertfam.org
  *  nox@FreeBSD.org
  *  obrien@cs.ucdavis.edu
  *  rkw
  *  shurd
  *  shurd@FreeBSD.org
  *  wlloyd@slap.net
  * //www.tomek.cedro.info)

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Strip shared library

- Add LICENSE
- Bump PORTREVISION for package change

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Some OCD cleanups on some of the perl@ ports.

- Remove dependencies in core
- Put testing depends in TEST_DEPENDS
- Remove unnecessary bsd.port.options.mk inclusions
- Remove checks for Perl versions that no longer exist in the ports tree
- Sort plists, some of which were so jumbled that I have to assume
  the plist was randomized before committing

A lot of the plist changes in this commit are moving PERL5_MAN3 after
SITE_PERL. It's repo churn now, but it makes updating the ports later
far easier.

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Cleanup plist

Rename comms/ patch-xy patches to reflect the files they modify.

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

Support STAGEDIR.

Add NO_STAGE all over the place in preparation for the staging support (cat: comms)

- Convert to new perl framework - Trim Makefile header

For perl@ owned ports:

- Fix COMMENT
- Trim header

Pass maintainership of almost of my "p5-*" ports to "perl@".

(I hope updating of them will be improved).

- Get Rid MD5 support

Updated to 1.04

PR:		ports/120660
Submitted by:	Felippe de Meirelles Motta <lippemail xx gmail.com>

- Take advantage of CPAN macro from bsd.sites.mk, change ${MASTER_SITE_PERL_CPAN} to CPAN.

PR:		ports/122674
Submitted by:	Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:	araujo (myself)
Approved by:	portmgr (pav)

Update to 1.003001.

Approved by:	maintainer

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+. Drop support for antique perl.

Work done by:	gabor
Sponsored by:	Google Summer of Code 2007
Hat:		portmgr

SHA256ify

Approved by:    krion@

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

* reflect renaming on CPAN File-Spec to PathTools    + add devel/p5-PathTools, remove devel/p5-File-Spec    + update dependencies for all affected ports (make them unconditional),      bump PORTREVISION for these ports module was renamed * reflect renaming on CPAN PodParser to Pod-Parser    + add textproc/p5-Pod-Parser, remove textproc/p5-PodParser    + update dependencies for all affected ports (

* for all changed ports make dependencies on File::Temp, Digest::MD5,
  Storable unconditional

* remove 'CONFIGURE_ARGS= INSTALLDIRS=site' from Makefile's
  (this variable is forced by bsd.port.mk now)

* update Class-Autouse to 1.17

* update POE-API-Hooks to 1.05

* make portlint happy (clean IGNORE, convert spaces to tabs and so on)

Unbreak build on 6-CURRENT.

Submitted by:	marcel

Fix pkg-plist.

Pointed by:	kris

Updated to 1.002

Updated to 1.000002

SIZEify.

utilize SITE_PERL

PR:		58166
Submitted by:	Cheng-Lung Sung <clsung@dragon2.net>

Mark IGNORE for perl < 5.6.x

PR:		56479
Submitted by:	bento, Mark Linimon <linimon@lonesome.com>

The sparc64 package machines need to have /dev/tty[ab] added to the list, since this port perversely needs serial devices to build. Those on alternate platforms may need to follow suit as may be necessary.

Reported by: kris

New port for Device::SerialPort