comms/qpage 3.3_9

MAN?PREFIX: eleminate its usage  and move man to share/man

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

comms: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  'Big Bad Bob' Frazier <bobf@mrp3.com>
  *  <mr@freebsd.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Dolgov <fox@furry.spb.ru>
  *  Andrey Lykhin <lan31@inbox.ru>
  *  Anton Voronin <anton@urc.ac.ru>
  *  Brandon S. Allbery KF8NH <allbery@ece.cmu.edu>
  *  Brian Dean <bsd@FreeBSD.org>
  *  Bruce Cran <bruce@cran.org.uk>
  *  Carl Makin <carl@stagecraft.cx>
  *  Darren <igla@batterybackups.net>
  *  David
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Devon H. O'Dell <devon.odell@coyotepoint.com>
  *  Diane Bruce <db@db.net>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Felix Palmen <felix@palmen-it.de>
  *  Frank Steinborn <steinex@nognu.de>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Janos.Mohacsi@bsd.hu
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeffrey Baitis <jeff@baitis.net>
  *  Johan Strom <johan@stromnet.se>
  *  Johan Strom <johna@stromnet.se>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julian Stacey <jhs@FreeBSD.org>
  *  Kirill Bezzubets <kirill@solaris.ru>
  *  MITA Yoshio <mita@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Matt Dawson <matt@mattsnetwork.co.uk>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Reifenberger (mike@Reifenberger.com)
  *  Mike Heffner <mikeh@FreeBSD.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicole Reid <root@cooltrainer.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Gardella <patrick@FreeBSD.org>
  *  Paul Traina <pst@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Rick Elrod <codeblock@eighthbit.net>
  *  Rodrigo Osorio <rodrigo@FreeBSD.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Staffan Ulfberg <staffanu@multivac.fatburen.org>
  *  Stephen Hurd <shurd@FreeBSD.org>
  *  Steve Woodford <scw@netbsd.hut.fi>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunry Chen <sunrychen@gmail.com>
  *  Søren Straarup <xride@x12.dk>
  *  Tony Shadwick <tshadwick@oss-solutions.com>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vladimir Grebenschikov
  *  Vladimir Kondratyev <wulf@FreeBSD.org>
  *  db
  *  dirkx@webweaving.org
  *  dom@happygiraffe.net
  *  elbarto@ArcadeBSD.org
  *  hm
  *  jmz
  *  joes@seaport.net
  *  lambert@lambertfam.org
  *  nox@FreeBSD.org
  *  obrien@cs.ucdavis.edu
  *  rkw
  *  shurd
  *  shurd@FreeBSD.org
  *  wlloyd@slap.net
  * //www.tomek.cedro.info)

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Do not set MASTER_SITES twice

Only sleep in ports if BATCH/PACKAGE_BUILDING are not defined.

Sponsored by:	Absolight

comms/qpage: Resurrect port

- New MASTER_SITE
- New MAINTAINER
- Change to USES=tar:Z
- Regenerate patches

PR:		206321

Remove expired ports: 2015-11-26 audio/pecl-id3: Broken for more than 6 months 2015-11-26 dns/geta: Broken for more than 6 months 2015-11-26 finance/openerp-web: Broken for more than 6 months 2015-11-26 devel/py-async: Further using of this module is not encouraged by upstream 2015-11-26 chinese/kon2: Depends on expiring chinese/cce 2015-11-26 games/linux-skulltag: Depends on expiring audio/linux-

Deprecate ports broken for more than 6 months

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

Mark as broken unfetchable ports

Cleanup plist

Fix packaging

Simplify plist

Stage comms/qpage

The PR wasn't quite right with regards to stage support, so I had to modify
it further.  The post-install configure file handling was focused on the
wrong file.  I updated the default name of the qpage configure file in
order to use the @sample keyword.  I added an entry in UPDATING to let
users know they may need to move an existing configure file accordingly.

PR:		192120
Submitted by:	maintainer (Jeff Blank)
Changes by:	marino

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

Reduce over inclusion of bsd.port.mk

Add NO_STAGE all over the place in preparation for the staging support (cat: comms)

- adopt optionsNG - trim historical header

Approved by:	portmgr (miwi)

In the rc.d scripts, change assignments to rcvar to use the literal name_enable wherever possible, and ${name}_enable when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

- Get Rid MD5 support

Begin the process of deprecating sysutils/rc_subr by s#. %%RC_SUBR%%#. /etc/rc.subr#

Fix a few "bad example" problems in the rc.d scripts that have been propogated by copy and paste.

1. Primarily the "empty variable" default assignment, which is mostly
${name}_flags="", but fix a few others as well.
2. Where they are not already documented, add the existence of the _flags
(or other deleted empties) option to the comments, and in some cases add
comments from scratch.
3. Replace things that look like:
prefix=%%PREFIX%%
command=${prefix}/sbin/foo
to just use %%PREFIX%%. In many cases the $prefix variable is only used
once, and in some cases it is not used at all.
4. In a few cases remove ${name}_flags from command_args
5. Remove a long-stale comment about putting the port's rc.d script in
/etc/rc.d (which is no longer necessary).

No PORTREVISION bumps because all of these changes are noops.

- Fix patch from previous commit - Bump PORTREVISION

PR:		ports/128346
Submitted by:	Jeff Blank <jfb@mr-happy.com> (maintainer)

- Added rc.subr integration and removed references to etc/rc.d/qpage.sh - Added OPTIONS knob for enabling srvrsnpp.c patch from ports/123437 (felt it   was better to make the patch optional) - Added more knobs for compile-time options: daemon user, syslog facility - Changed ${INSTALL_SCRIPT} to ${INSTALL_DATA} in post-install target - Removed old maintainer e-mail address from pkg-descr

PR:		128318
Submitted by:	maintainer

Fix a potential buffer overflow.

PR:		128216
Submitted by:	maintainer

- Fix segmentation faults on SIGHUP. - Assign maintainership to submitter.

PR:		127075, 127827
Submitted by:	Jeffrey Blank <jfb@mr-happy.com>

remove USE_REINPLACE for all ports with categories starting with C

- Add SHA256

The qpage port will run words together in long pages. The problem 	is in msgcpy in util.c, where the breaks don't preserve word 	boundries.

PR:		ports/73020
Submitted by:	Douglas K. Rand <rand@meridian-enviro.com>

- make it run by the user uucp; - since I'm there, create the spool directory for a port installation.

PR:		ports/62617
Submitted by:	Mike Andrews

SIZEify.

Nitpicks for the comms/qpage port

The comms/qpage port has a few minor problems.  A default installation gives
	the following errors when the /usr/local/etc/rc.d/qpage.sh script is
	execute:

	    qpage[68438]: cannot open /etc/qpage.cf: No such file or directory
	    qpage[68438]: cannot access LockDir(/var/spool/lock): Permission denied
	    qpage[68438]: cannot access QueueDir(/var/spool/qpage): No such file or directory
	    qpage[68438]: cannot chdir to QueueDir(/var/spool/qpage): No such file or directory

	In short:

	1) qpage looks for its configuration file in /etc instead of /usr/local/etc
	2) It setuid()'s to a user (daemon) without permission to access /var/spool/lock
	but does not document this anywhere outside of the source.
	3) It's queue directory is not created by installing the port.

PR:		ports/48059
Submitted by:	Kirk Strauser <kirk@strauser.com>

ECHO -> ECHO_MSG (ECHO_CMD for deskutils/notebook)

PR:		ports/56767-56770,56772-56774,56776-56784
Submitted by:	KATO Tsuguru <tkato@prontomail.com>

Install sample cf file mode 640, not 660

De-pkg-comment.

Maintainer address bounces.

upgrade to 3.3

PR:		39383
Submitted by:	Scott Lambert <lambert@lambertfam.org>
Approved by:	maintainer timeout

Use POSIX syntax for chown to fix install on -current

Noticed by:	bento

Use user:group in call to chown.

Add a missing ';' so this port builds/installs cleanly.

As threatened on freebsd-ports: all startup scripts know about the two options `start' and `stop' now (unless I have forgotten any). This allows us to call the scripts from /etc/rc.shutdown with the correct option.

The (42 or so) ports that already DTRT before are unchanged.

Move local distfiles to ${MASTER_SITE_LOCAL}/fenner .

Remove obsolete `Version required' lines.

update with the new PORTNAME/PORTVERSION variables

Change all www.freebsd.org/~user references to people.FreeBSD.org/~user, as the days of the former are numbered.

Reviewed by:	asami

echo -> ${ECHO} or ${ECHO_MSG}  and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE}

Change Id->FreeBSD.

chmod -> ${CHMOD} chown -> ${CHOWN}