converters/p5-MIME-Base64-URLSafe0.01_2

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

converters: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Keda <admin@lissyara.su>
  *  Alex Semenyaka <alex@rinet.ru>
  *  Alexandr Kovalenko <never@nevermind.kiev.ua>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrey A. Chernov <ache@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Blaz Zupan <blaz@amis.net>
  *  Brent J. Nordquist <bjn@visi.com>
  *  Carlos J. Puga Medina <cpm@fbsd.es>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Chris Costello <chris@FreeBSD.org>
  *  Cyrus Rahman <cr@jcmax.com>
  *  Dan Rench <citric@cubicone.tmetic.com>
  *  Denis Pokataev <catone@cpan.org>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Douglas Thrift <douglas@douglasthrift.net>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Erwin Lansing <erwin@lansing.dk>
  *  G. Adam Stanislav
  *  G. Adam Stanislav <adam@whizkidtech.net>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Ilia Chipitsine <ilia@jane.cgu.chel.su>
  *  Ismail Yenigul <ismail.yenigul@surgate.com>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jan-Peter Koopmann <j.koopmann@seceidos.de>
  *  Jason Burgess <dev@fenux.net>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Konstantin Chuguev <Konstantin.Chuguev@dante.org.uk>
  *  Kuang-che Wu <kcwu@csie.org>
  *  Lung Sung <clsung@FreeBSD.org>
  *  M.Indlekofer@gmx.de
  *  Marc Fournier <scrappy@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Masanori Kiriake <seiken@nbs.co.jp>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Haro <mharo@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Nosov Artem <chip-set@mail.ru>
  *  Oleg R. Muhutdinov <mor@WhiteLuna.com>
  *  Oscar Bonilla <obonilla@fisicc-ufm.edu>
  *  Patrick Li <pat@databits.net>
  *  Pav Lucistnik <pav@oook.cz>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rodrigo Graeff <delphus@gmail.com>
  *  Rong-En Fan <rafan@infor.org>
  *  Ryan T. Dean <rtdean@cytherianage.net>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thomas Dreibholz <dreibh@iem.uni-due.de>
  *  Tim Vanderhoek <ac199@freenet.hamilton.on.ca>
  *  Timur Bakeyev <bat@cpan.org>
  *  Timur Bakeyev <timur@FreeBSD.org>
  *  Timur I. Bakeyev <bat@cpan.org>
  *  Torsten Zuehlsdorff <ports@toco-domains.de>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vladimir Timofeev <vovkasm@gmail.com>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  ache
  *  ache@FreeBSD.org
  *  buganini@gmail.com
  *  chinsan
  *  hosokawa
  *  ijliao
  *  kbyanc
  *  keiichi@iijlab.net
  *  never@nevermind.kiev.ua
  *  nork@FreeBSD.org
  *  nork@cityfujisawa.ne.jp
  *  roman@xpert.com
  *  samm
  *  thierry@pompo.net
  *  torstenb@FreeBSD.org
  *  trevor
  *  vanilla@
  *  will

With hat:	portmgr

converters/p5-MIME-Base64-URLSafe: Add NO_ARCH

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

Remove Perl core module

- While I'm here:
  - Add LICNESE
  - Remove unnecessary WRKSRC
- Bump PORTREVISION for dependency change

With hat:	perl

Remove all := from BUILD_DEPENDS, here are never needed.

While there, cleanup, and sort depends.

When build and run dependencies are the same, there are three ways to
avoid duplicating the list while not adding the framework added
BUILD_DEPENDS to the RUN_DEPENDS.  In order of preference, they are:

1) use RUN_DEPENDS to set BUILD_DEPENDS:

BUILD_DEPENDS=	${RUN_DEPENDS}
RUN_DEPENDS=	foo:bar/baz

2) create another variable and use it:

MY_DEPENDS= foo:bar/baz
BUILD_DEPENDS=	${MY_DEPENDS}
RUN_DEPENDS=	${MY_DEPENDS}

3) use BUILD_DEPENDS to set RUN_DEPENDS and force evaluation:

BUILD_DEPENDS=	foo:bar/baz
RUN_DEPENDS:=	${BUILD_DEPENDS}

Sponsored by:	Absolight

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Cleanup plist

- add stage support

Approved by:	portmgr (blanket infrastructure)

Add NO_STAGE all over the place in preparation for the staging support (cat: converters)

- convert to the new perl5 framework - trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or   RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned   about for a while.

PR:		ports/168208
Approved by:	portmgr (miwi)

- Get Rid MD5 support

Perl version of Python's URL-safe base64 codec

WWW: http://search.cpan.org/dist/MIME-Base64-URLSafe/

PR:		ports/138057
Submitted by:	Dan Rench <citric at cubicone.tmetic.com>