converters/recode3.6_16

converters/recode: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

converters: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Keda <admin@lissyara.su>
  *  Alex Semenyaka <alex@rinet.ru>
  *  Alexandr Kovalenko <never@nevermind.kiev.ua>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrey A. Chernov <ache@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Blaz Zupan <blaz@amis.net>
  *  Brent J. Nordquist <bjn@visi.com>
  *  Carlos J. Puga Medina <cpm@fbsd.es>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Chris Costello <chris@FreeBSD.org>
  *  Cyrus Rahman <cr@jcmax.com>
  *  Dan Rench <citric@cubicone.tmetic.com>
  *  Denis Pokataev <catone@cpan.org>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Douglas Thrift <douglas@douglasthrift.net>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Erwin Lansing <erwin@lansing.dk>
  *  G. Adam Stanislav
  *  G. Adam Stanislav <adam@whizkidtech.net>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Ilia Chipitsine <ilia@jane.cgu.chel.su>
  *  Ismail Yenigul <ismail.yenigul@surgate.com>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jan-Peter Koopmann <j.koopmann@seceidos.de>
  *  Jason Burgess <dev@fenux.net>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Konstantin Chuguev <Konstantin.Chuguev@dante.org.uk>
  *  Kuang-che Wu <kcwu@csie.org>
  *  Lung Sung <clsung@FreeBSD.org>
  *  M.Indlekofer@gmx.de
  *  Marc Fournier <scrappy@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Masanori Kiriake <seiken@nbs.co.jp>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Haro <mharo@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Nosov Artem <chip-set@mail.ru>
  *  Oleg R. Muhutdinov <mor@WhiteLuna.com>
  *  Oscar Bonilla <obonilla@fisicc-ufm.edu>
  *  Patrick Li <pat@databits.net>
  *  Pav Lucistnik <pav@oook.cz>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rodrigo Graeff <delphus@gmail.com>
  *  Rong-En Fan <rafan@infor.org>
  *  Ryan T. Dean <rtdean@cytherianage.net>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thomas Dreibholz <dreibh@iem.uni-due.de>
  *  Tim Vanderhoek <ac199@freenet.hamilton.on.ca>
  *  Timur Bakeyev <bat@cpan.org>
  *  Timur Bakeyev <timur@FreeBSD.org>
  *  Timur I. Bakeyev <bat@cpan.org>
  *  Torsten Zuehlsdorff <ports@toco-domains.de>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vladimir Timofeev <vovkasm@gmail.com>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  ache
  *  ache@FreeBSD.org
  *  buganini@gmail.com
  *  chinsan
  *  hosokawa
  *  ijliao
  *  kbyanc
  *  keiichi@iijlab.net
  *  never@nevermind.kiev.ua
  *  nork@FreeBSD.org
  *  nork@cityfujisawa.ne.jp
  *  roman@xpert.com
  *  samm
  *  thierry@pompo.net
  *  torstenb@FreeBSD.org
  *  trevor
  *  vanilla@
  *  will

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

converters/recode: fix info file, add LICENCE, quiet portlint/portclippy

This has been broken for almost 10 months, and again 3 months of silence
from the maintainer, so let me step in to just fix it for the nonce.

- Add LICENSE=GPLv2+
- Add USES=makeinfo to fix .info file in clean-room builds (poudriere) [1]
- Reshuffle a few lines to please portclippy and portlint
- Bump PORTREVISION to flush out the broken packages and force rebuild

- Add DISABLED example to strip library in order to also please
  stage-qa with DEVELOPER=yes (would require maintainer approval),
  in post-install (just remove @: and the comment line to enable).

PR:		241879 [1]
Submitted by:	Victor Sudakov <vas@sibptus.ru> [1]
Approved by:	portmgr@ (blanket, see MFH below)
MFH:		2020Q3 (blanket LICENSE, dependencies to unbreak, modernization)

Remove non-ascii character to fix build on recent -current. For the long term, port should be updated to newer version.

PR:		241903
PR:		241969

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Remove libiconv.so.3 compatibility link that was added in r374303 to prevent massive PORTREVISION bumps.  Bump dependent ports that have not been bumped since.

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

Remove $FreeBSD$ from patches files in categories a-j.

With hat:	portmgr
Sponsored by:	Absolight

Update ports in the [bcd]* categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

- Drop .la files, no dependees require them

Approved by:	portmgr blanket

Rename all patches that contain '::' as a path separator, and use '__' instead.

Change mastersite to github. tarball did not change.

PR:		190444

Change mastersite to github.

PR:		190444

When linking a library libA with a library libB using libtool, if libB.la exists, libtool will add all libraries libB.la refers to (dependency_libs field) to the linker command line and store them in the dependency_libs field of libA.la.  So everything that subsequently links with libA will also link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

- Convert USE_AUTOTOOLS=libtool to USES=libtool. - Replace PERL with REINPLACE_CMD in post-patch. - Replace "iconv.h" with "${ICONV_PREFIX}/include/iconv.h" so   /usr/include/iconv.h is included on FreeBSD 10 even when   converters/iconv is installed.  The port uses iconvctl(3) which   isn't declared in /usr/local/include/iconv.h with -DLIBICONV_PLUG. - files/patch-lib-error.c: Implement program_n

PR:		186637
Approved by:	demon (maintainer)

Support stage

- Add explicit LDFLAGS for iconv

Submitted by:	marino
Approved by:	portmgr (bapt)

Add NO_STAGE all over the place in preparation for the staging support (cat: converters)

- Convert to new Uses/perl5.mk framework - Resolve issues with implicit lang/perl in extract and patch dependencies - Trim Makefile header

Reviewed by:	bapt@ (exp-run)
Approved by:	bapt@ (portmrg@)

Add a patch to allow building with gcc-4.7 and 4.8.

Approved by:	maintainer

- Convert USE_ICONV=yes to USES=iconv - Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Remove extra lines.

Do not compile and use bundled libiconv, the converters/iconv from ports.

PR:		177321
Submitted by:	William Grzybowski <william88@gmail.com>
With help and suggestions from:		bapt

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS) - Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:		157936
Submitted by:	myself
Exp-runs by:	pav
Approved by:	pav

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1] - Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG - Remove X11BASE support in favor of LOCALBASE or PREFIX - Use USE_LDCONFIG instead of INSTALLS_SHLIB - Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
	Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
	ehaupt, nox, itetcu, flz, pav

PR:		116263
Tested on:	pointyhat
Approved by:	portmgr (pav)

Conversion to a single libtool environment.

Approved by:	portmgr (kris)

SHA256ify

Approved by:    krion@

Plug memory leak in librecode. Bump PORTREVISION.

PR:		89934
Submitted by:	Sergey Prikhodko <sergey@network-asp.biz>

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Apply a big libtool patch to allow porters to use the libtool installed by the libtoolX ports instead of the one included with each port.  Ports that set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of the included version.  To restore previous behavior, use the new macro, USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:		63944
Based on work by:eik and marcus
Approved by:	ade (autotools maintainer)
Tested by:	kris on pointyhat
Bound to be hidden problems:	You bet

Add size data, approved by maintainers.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

	USE_LIBTOOL=YES		->	USE_LIBTOOL_VER=13
	USE_AUTOCONF=YES	->	USE_AUTOCONF_VER=213
	USE_AUTOMAKE=YES	->	USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

- Fix build on AMD64

Approved by:	maintainer informed

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:	trevor
Tested by:	bento

Now gettext 0.12.1 is gettext-old.

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:	kris

Chase the libintl.so shared lib version.

Utilize INFO variable.

Fix compilation on alpha.

Submitted by:	Christian Weisgerber <naddy@freebsd.org>
PR:		51066

Bump the port revision.

Pointed out by:		kris