databases/p5-DBIx-Safe 1.2.5_3

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

databases: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  "Mahdi Mokhtari <mokhi64@gmail.com>"
  *  "Meikel Brandmeyer" <ocaml-sqlite3-port@kotka.de>
  *  <hvo.pm@xs4all.nl>
  *  <jsmith@resonatingmedia.com>
  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Snelson <Alan@Wave2.org>
  *  Aldis Berjoza <graudeejs@gmail.com>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov,com>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Novitsky
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexey Degtyarev <alexey@renatasystems.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@fix.no>
  *  Andrei Antoukh <niwi@niwi.be>
  *  Andrew McNaughton <andrew@scoop.co.nz>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Kostenko <andrey@kostenko.name>
  *  Andrey Simonenko
  *  Andrey Zakhvatov
  *  Anes Mukhametov <anes@anes.su>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Antonio Carlos Venancio Junior (<antonio@php.net>)
  *  Autrijus Tang <autrijus@autrijus.org>
  *  Babak Farrokhi <farrokhi@FreeBSD.org>
  *  Bartek Rutkowski <r@robakdesign.com>
  *  Bernard Spil <brnrd@FreeBSD.org>
  *  Brent J. Nordquist <bjn@visi.com>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Choe, Cheng-Dae
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Chris Larsen <darth@vader.dk>
  *  Damian Gerow <dgerow@afflictions.org>
  *  Daniel O'Connor
  *  Daniel Wijnands <daniel@itxl.nl>
  *  Dave Green <dg@fastmail.co.uk>
  *  David Thiel <lx@FreeBSD.org>
  *  Davíð Steinn Geirsson <david@isnic.is>
  *  Denis Generalov <gd.workbox@gmail.com>
  *  Denis Generalov <gd@rambler-co.ru>
  *  Denis Shaposhnikov <dsh@bamus.cz>
  *  Dermot Tynan <dtynan@kalopa.com>
  *  Dmitry Liakh <dliakh@ukr.net>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Domas Mituzas <midom@dammit.lt>
  *  Dominic Mitchell
  *  Don Owens <don@regexguy.com>
  *  Dryice Dong Liu <dryice@dryice.name>
  *  Edwin Groothuis (edwin@mavetju.org)
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Espen Tagestad <espen@tagestad.no>
  *  Espen Volden aka voldern <voldern@hoeggen.net>
  *  Evan Sarmiento <bsdports@wayfair.com>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Frank Wall <fw@moov.de>
  *  Ganbold Tsagaankhuu <ganbold@FreeBSD.org>
  *  Gary Palmer <gpalmer@FreeBSD.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geraud CONTINSOUZAS <geraud@gcu.info>
  *  Gerrit Beine <tux@pinguru.net>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Hansjoerg Pehofer <hansjoerg.pehofer@uibk.ac.at>
  *  Henk van Oers <hvo.pm@xs4all.nl>
  *  Henrik Hodne <henrik@hodne.io>
  *  Hiroyuki Hanai <hanai@FreeBSD.org>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang
  *  Hye-Shik Chang <perky@python.or.kr>
  *  Ilia Chipitsine <ilia@jane.cgu.chel.su>
  *  Ivan Voras <ivoras@FreeBSD.org>
  *  J.F. Dockes
  *  Jaap Boender <jaapb@kerguelen.org>
  *  Jake Smith <jake@xz.cx>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Janos.Mohacsi@bsd.hu
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jens Rehsack <rehsack@liwing.de>
  *  Jeremy Chadwick <koitsu@FreeBSD.org>
  *  Jev Björsell <ports@ecadlabs.com>
  *  Jim Ohlstein <jim@ohlste.in>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Horn <joehorn@gmail.com>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Chen <johnpupu@gmail.com>
  *  John Marino <marino@FreeBSD.org>
  *  John Merryweather Cooper
  *  John Merryweather Cooper et al
  *  Jon Nistor <nistor@snickers.org>
  *  Jonathan Weiss (<jw@innerewut.de>)
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joshua D. Abraham <jabra@ccs.neu.edu>
  *  Jov <amutu@amutu.com>
  *  Jov amutu@amutu.com
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julien Laffaye <kimelto@gmail.com>
  *  Jyun-Yan You <jyyou@cs.nctu.edu.tw>
  *  Keith Gaughan <k@sterechro.me>
  *  Kevin Bowling <kbowling@freebsd.org>
  *  Kimo <kimor79@yahoo.com>
  *  Kimura Fuyuki <fuyuki@nigredo.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Lars Balker Rasmussen <lbr@FreeBSD.org
  *  Lars Balker Rasmussen <lbr@FreeBSD.org>
  *  Lars Eggert <larse@isi.edu>
  *  Lars Thegler <lars@thegler.dk>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Loïc BARTOLETTI
  *  Loïc BARTOLETTI <lbartoletti@FreeBSD.org>
  *  Lubomir Marinov <lubomir_m@abv.bg>
  *  Mahdi Mokhtari <mokhi64@gmail.com>
  *  Mahlon E. Smith <mahlon@martini.nu>
  *  Marc G. Fournier <scrappy@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <martin@matuska.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Mathieu Arnold <m@absolight.net>
  *  Matthew Seaman
  *  Matthias Andree <mandree@FreeBSD.org>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Matthias Petermann <matthias@petermann-it.de>
  *  Max Khon
  *  Max Khon <fjoe@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Winking <mwfp@foldl.net>
  *  Mikael URANKAR and Loïc BARTOLETTI
  *  Mike Carlson (carlson39@llnl.gov)
  *  Mikhail T. <michael@fun-box.ru>
  *  Mikhail Teterin
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Mikolaj Golub <trociny@FreeBSD.org>
  *  Mirko Zinn <mail@derzinn.de>
  *  Mohammad S. Babaei <info@babaei.net>
  *  Muhammad Moinur Rahman <bofh@FreeBSD.org>
  *  Nick Hibma <n_hibma@freebsd.org>
  *  Nick Hilliard <nick@foobar.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nicolas Embriz <nbari@tequila.io>
  *  Nicolas de Bari Embriz <nbari@dalmp.com>
  *  Oleg Sharoiko <os@rsu.ru>
  *  Olexander Melnyk <olexander.v.melnyk@gmail.com>
  *  Oliver Eikemeier <eikemeier@fillmore-labs.com>
  *  Olivier Duchateau <duchateau.olivier@gmail.com>
  *  Palle Girgensohn <girgen@FreeBSD.org>
  *  Palle Girgensohn <girgen@partitur.se>
  *  Palle Girgensohn <girgen@pingpong.net>
  *  Parv <parv@pair.org>
  *  Pete Fritchman <petef@databits.net>
  *  Peter Avalos <pavalos@theshell.com>
  *  Philip M. Gollucci
  *  Philip M. Gollucci <philip@p6m7g8.com>
  *  Philip Stoev <philip.stoev@galeracluster.com>
  *  Pierre-Emmanuel Andre <pea@raveland.org>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Qing Feng <qingfeng@douban.com>
  *  Quinton Dolan <q@onthenet.com.au>
  *  Radim Kolar
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Rick Miller
  *  Robert Kruus <rob.kruus@gmail.com>
  *  Rod Taylor <ports@rbt.ca>
  *  Roland van Laar <roland@micite.net>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Roy Boerner
  *  Rozhuk Ivan <rozhuk.im@gmail.com>
  *  Rusty Nejdl
  *  Ryan Steinmetz <rpsfa@rit.edu>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Ryan T. Dean <rtdean@cytherianage.net>
  *  Sam Lawrance <boris@brooknet.com.au>
  *  Scott McWhirter <scott@surreytech.co.uk>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sean Chittenden <seanc@FreeBSD.org>
  *  Sergei Kolobov <sergei@kolobov.com>
  *  Sergei Vyshenski <svysh.fbsd@gmail.com>
  *  Sergey A. Osokin <osa@FreeBSD.org.ru>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Matveychuk <sem@FreeBSD.org>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sevan Janiyan <venture37@geeklan.co.uk>
  *  Sheldon Hearn <sheldonh@FreeBSD.org>
  *  Stanislav Svirid <count@211.ru>
  *  Stefan Schmidt <stefan.schmidt@stadtbuch.de>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steve Wills <swills@freebsd.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  T. William Wells <bill@twwells.com>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Timur I. Bakeyev <bat@cpan.org>
  *  Tom Judge <tj@FreeBSD.org>
  *  Torsten Zuehlsdorff <ports@toco-domains.de>
  *  Torsten Zuhlsdorff <ports@toco-domains.de>
  *  Toshiya Saitoh (<toshiya@saitoh.nu>)
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vasil Dimov <vd@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vladimir Timofeev <vovkasm@gmail.com>
  *  Wen Heping
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  William Grzybowski <wg@FreeBSD.org>
  *  Xin Li <delphij@FreeBSD.org>
  *  Yarema <yds@CoolRat.org>
  *  Yarema <yds@Necessitu.de>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yoichi NAKAYAMA <yoichi@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zach Thompson <hideo@lastamericanempire.com>
  *  Zach Thompson <lin-chi@lastamericanempire.com>
  *  ache@FreeBSD.org
  *  alfred
  *  alp@sfedu.ru
  *  andrew@scoop.co.nz
  *  andrey@kostenko.name
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  clive
  *  clive@FreeBSD.org
  *  clsung@dragon2.net
  *  dcf@aracnet.com
  *  elvstone@gmail.com
  *  erikhb@bgnett.no
  *  erwin@FreeBSD.org
  *  gahr
  *  ijliao
  *  ijlioa
  *  ivoras
  *  johnpupu <johnpupu@gmail.com>
  *  kirk@daycos.com
  *  kuriyama
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  loïc bartoletti <lbartoletti@FreeBSD.org>
  *  mharo@FreeBSD.org
  *  michael johnson <ahze@ahze.net>
  *  milki <milki@rescomp.berkeley.edy>
  *  mm@FreeBSD.org
  *  nbm
  *  nectar@FreeBSD.org
  *  nork@FreeBSD.org
  *  nork@cityfujisawa.ne.jp
  *  olevole@olevole.ru
  *  proler@gmail.com
  *  sergey@migsoft.com.ua
  *  sobomax
  *  spam@rm-rf.kiev.ua
  *  stas
  *  tobez
  *  tremere@cainites.net
  *  vanilla
  *  vanilla@
  *  wen@FreeBSD.org
  *  wenheping<wenheping@gmail.com>
  *  wolman@cs.washington.edu
  * # Created by Kevin Bowling <kbowling@FreeBSD.org>
  * # Created by Matthias Fechner <mfechner@FreeBSD.org>

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Cosmetic change

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except for where it resulted in a change in output from build-depends-list or run-depends-list.

Approved by:	portmgr (adamw)

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE - Add NO_ARCH

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Cleanup plist

- Support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat: databases)

- Cleanup Makefile header

- Use RUN_DEPENDS:=BUILD_DEPENDS - Add BUILD_DEPENDS - Cosmetic change

- Convert to new perl framework

- Add p5-DBIx-Safe 1.2.5

The purpose of DBIx::Safe is to give controlled, limited access to an
application, rather than simply passing it a raw database handle through DBI.
DBIx::Safe acts as a wrapper to the database, by only allowing through the
commands you tell it to. It filters all things related to the database handle -
methods and attributes.

The typical usage is for your application to create a database handle via a
normal DBI call to new(), then pass that to DBIx::Safe->new(), which will return
you a DBIx::Safe object. After specifying exactly what is and what is not
allowed, you can pass the object to the untrusted application. The object will
act very similar to a DBI database handle, and in most cases can be used
interchangeably.

By default, nothing is allowed to run at all. There are many things you can
control. You can specify which SQL commands are allowed, by indicating the first
word in the SQL statement (e.g. 'SELECT'). You can specify which database
methods are allowed to run (e.g. 'ping'). You can specify a regular expression
that allows matching SQL statements to run (e.g. 'qr{SET TIMEZONE}'). You can
specify a regular expression that is NOT allowed to run (e.g. qr(UPDATE xxx}).
Finally, you can indicate which database attributes are allowed to be read and
changed (e.g. 'PrintError'). For all of the above, there are matching methods to
remove them as well.

WWW: http://search.cpan.org/dist/DBIx-Safe/

Feature safe:	yes