devel/ois 1.6.0

devel/ois: update 1.5.1 → 1.6.0

- Pass maintainership to submitter

PR:		298353
Submitted by:	rottlogg@proton.me

devel/ois: drop maintainership

devel/ois: update 1.2.0 → 1.5.1

- Switch to GitHub
- Update WWW
- Add LICENSE_FILE
- Switch to CMake
- Optionally install test programs

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

Remove useless Created by: headers mentioning me

Remove # $FreeBSD$ from Makefiles.

Add USES=xorg USES=gl, ports categories d

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'd'.

Drop useless dependency on gmake (bmake build those fine)

Update WWW: SF redirects to https://sourceforge.net/projects/<PROJECT_NAME>/

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

- Add LICENSE

- Strip library

Convert to USES=autoreconf

- Drop @dirrm* from plist

Remove two libtool fixes from Mk/Uses/libtool.mk.  They don't always work when an older version of a package is installed.  This is the case when an executable links with installed libraries and with uninstalled libraries that link with other uninstalled libraries.  For each of the directly linked libraries the executable will have an rpath (/usr/local/lib for the installed libraries and a path un

With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.

This partially reverts r358784.

PR:		191611
Approved by:	portmgr (bapt)

Add 4 new sed commands to USES=libtool.  The first two apply some of the changes that Debian made to their libtool.  The first command applies to libtool versions 1.4 and up.  The second command is somewhat more elaborate but essentially it uses the sed hold space to move an "elif...fi" block down.  It applies to 2.x.  Together these reduce overlinking to unpatched .la files (from ports that don't

The third and fourth command fix relinking.  During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory.  This allows running an
executable that links to libA from within the work directory.  The relink
removes this extra runpath.

When libtool relinks libA it replaces "libB.la" on the linker command line
with "-L${STAGEDIR}${PREFIX}/lib -lB" with the intention to link to libB in
the stage directory but this -L flag isn't necessarily the first so another
libB may be linked instead.  The two sed commands make relink the same as a
normal link.  This means libtool will relink with libraries from the work
directory using a path similar to "../srcB/.libs/libB.so" without -L flags.
This applies to libtool 1.4 and up.  Earlier versions don't seem to relink
libraries.
(This fixes ports like devel/apr1 so they link with freshly built libraries
instead of installed libraries.)

Fix all ports with missing libraries.

Additionally:
archivers/rpm4: USES=patchfix.
databases/gdbm: INSTALL_TARGET=install-strip.
devel/gnome-vfs: remove patch that doesn't change anything.
devel/ois: INSTALL_TARGET=install-strip and use standard USE_AUTOTOOLS.
devel/zziplib: INSTALL_TARGET=install-strip, MAKE_CMD.
multimedia/mjpegtools: remove USE_AUTOTOOLS, use modern compiler on i386
   instead of disabling optimisations.
net/libnetdude: disable static plugins.

PR:		190941
Exp-run:	antoine
Approved by:	portmgr (antoine)

- Bump PORTREVISION after last change

Suggested by:	tijl

- Convert USE_AUTOTOOLS=libtool to USES

- Support staging - Convert USE_GMAKE to USES - Update WWW

Add NO_STAGE all over the place in preparation for the staging support (cat: devel part 3)

Fix build with clang/libc++

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Trim Makefile headers - Drop ABI versions from LIB_DEPENDS - OptionsNG - Pet portlint - Switch to dynamic plist where useful - Canonicalize patch names - Fix DOS line endings in patch files

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS) - Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:		157936
Submitted by:	myself
Exp-runs by:	pav
Approved by:	pav

-remove MD5

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:	portmgr (for Mk/bsd.port.mk part)
Tested by:	Multiple -exp runs

- Switch SourceForge ports to the new File Release System: categories starting with D

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

- Mark MAKE_JOBS_SAFE - Use SF/subdir abbreviation for some ports

- Update X.org ports to 7.4+ (few ports are more recent than the katamari). - Bump PORTREVISION for all ports depending on libglut since the shlib version number went from 4 to 3. - Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't installed anymore. - Couple of ports fixes (mostly missing xorg components added to USE_XORG).

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:	exp build run (erwin)

- Add patch to solve slow mouse movement on low FPS - Add forgotten USE_LDCONFIG

Obtained from:	sourceforge tracker
Approved by:	miwi (mentor)

- Update my email in two more ports

Approved by:	miwi (mentor)

Object Oriented Input System (OIS) is meant to be a cross platform, simple solution for using all kinds of Input Devices (KeyBoards, Mice, Joysticks, etc) and feedback devices (e.g. forcefeedback). Written in C++ using Object Oriented Design patterns.

NOTE: this ports lacks joystick support. For now.

WWW: http://www.wreckedgames.com/

PR:		ports/124711
Approved by:	miwi (mentor)