devel/py-factory-boy3.3.0_2

*: Switch consumers over to Django 5.2

Django 4.2 reached its End-of-Life on 7th April 2026 and Django 5.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2028.

* Switch most ports that use www/py-django42 to www/py-django52.

* Where necessary, remove PORTSCOUT, which is no longer needed because
  an update to a newer version that no longer supports Django 4.2 should
  now be possible.

* Bump PORTREVISION due dependency change where necessary.

PR:		291707
Reviewed by:	sunpoet (python)
Differential Revision:	https://reviews.freebsd.org/D56966

devel/py-factory-boy: Fix TEST_DEPENDS

The other 2 ports in the TEST_DEPENDS (py-flask-sqlalchemy and py-sqlalchemy-utils) depend on py-sqlalchemy20.

Approved by:	portmgr (blanket)
With hat:	python

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

*: Switch consumers over to Django 4.2

Django 3.2 reached its End-of-Life on 1st April 2024 and Django 4.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2026.

* Switch most ports that use www/py-django32 to www/py-django42.

* Ports that are not compatible with Django 3.2 have already been set
  with an expiration date were not taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		276319
Reviewed by:	dvl, grembo, ultima
Approved by:	bofh (implicit), dvl, grembo, Kevin Golding, sunpoet,
		ultima, maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D44637

devel/py-python-dateutil: Move devel/py-dateutil to devel/py-python-dateutil

- Convert to USE_PYTHON=pep517
- Bump PORTREVISION of dependent ports for dependency change
- While I'm here, update audio/py-pyradio to use PYTHON_PKGNAMEPREFIX instead of PKGNAMEPREFIX for *_DEPENDS

*: Fix build after 3232af18957315da73e0e4105cac869d8cb3c6b1 (www/py-flask PORTNAME change)

Approved by:	portmgr (blanket)

devel/py-factory-boy: Update to 3.3.0

Changelog: https://factoryboy.readthedocs.io/en/stable/changelog.html#id1

PR:		273142

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

devel/py-factory-boy: Replace reference to PY_PILLOW with its value

Since this port doesn't work with Python 2.7, the value of PY_PILLOW
doesn't change. So replace reference to it with its value.

PR:		269401
Approved by:	maintainer

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

devel/py-factory-boy: Update to 3.2.1

Change log:
  https://github.com/FactoryBoy/factory_boy/blob/master/docs/changelog.rst#320-2020-12-28

PR:		260693

devel/py-factory-boy: Switch test suite to Django 3.2

* Adjust TEST_DEPENDS to use Django 3.2 (LTS release) because the
  extended support for Django 3.0 has expired on 6th April 2021.

PR:		255112
Approved by:	Goran Mekić <meka@tilda.center> (maintainer)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update USES=python for py-isort 5.6.4 update

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version
  requirements of Pillow for www/py-wagtail.

Release Notes:

* https://pillow.readthedocs.io/en/latest/releasenotes/index.html

Backward Incompatible Changes (7.0.0):

* https://pillow.readthedocs.io/en/latest/releasenotes/7.0.0.html#backwards-incompatible-changes

Detailed Changelog:

* https://github.com/python-pillow/Pillow/blob/7.0.0/CHANGES.rst

PR:		243665
Submitted by:	sunpoet (patch for 7.0.0 and repo-copied version)
Reviewed by:	koobs [1], sunpoet
Approved by:	koobs (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23713

devel/py-factory-boy: Fix PORTNAME to match PyPI, fix make test

PR:		242805
Reported by:	koobs

devel/py-factory-boy: Correct license and change TEST_DEPENDS to use converters/py-text-unidecode instead of textproc/py-text-unidecode

PR:		242805

Add new port devel/py-factory-boy

As a fixtures replacement tool, it aims to replace static, hard to maintain
fixtures with easy-to-use factories for complex object. Instead of building an
exhaustive test setup with every possible combination of corner cases,
factory_boy allows you to use objects customized for the current test, while
only declaring the test-specific fields

WWW: https://github.com/FactoryBoy/factory_boy

PR:		242805
Submitted by:	Goran Mekić <meka@tilda.center>