devel/py-jsonpatch1.33_1

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

devel/py-jsonpatch: Update to 1.33

PR:		276312
Approved by:	harm@weites.com (maintainer timeout)

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
cannot conflict with itself (due to logic in bsd.port.mk that
supresses the pattern match result in that case).

A few ports that set the conflicts variables depending on complex
conditions (e.g. port options), have been left unmodified, despite
probably containing outdated package names.

These changes should only affect the installation of locally built
ports, not the package building with poudriere. They should give an
early indication of the install conflict in cases where currently
the pkg command aborts an installation when it detects that an
existing file would be overwritten,

Approved by:	portmgr (implicit)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

devel/py-jsonpatch: Update 1.9 -> 1.21

Port changes:
* Change to DISTVERSION
* Move RUN_DEPENDS to proper place
* Add NO_ARCH=yes
* Rename the target regression-test -> do-test
* Change WWW to the real homepage

PR:		226508
Approved by:	harm@weites.com (maintainer timeout; 15 days)

Convert Python ports to FLAVORS.

Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Remove trailing whitespace from Makefiles, A-L.

devel/py-jsonpatch: update 1.7 -> 1.9

- Add missing py-jsonpointer dependency
- Add tests

PR:		199338
Submitted by:	Marcin Cieslak <saper@saper.info>
Approved by:	maintainer timeout (3 months)
MFH:		2015Q3

devel/py-jsonpatch: Apply JSON-Patches (RFC 6902)

WWW: https://pypi.python.org/pypi/jsonpatch

PR:		192674
Submitted by:	harm weites com