devel/py-pyvisa 1.16.2

devel/py-pyvisa: Update to 1.16.2

Changes:	https://github.com/pyvisa/pyvisa/releases

devel/py-pyvisa: Remove PY_SETUPTOOLS

py-setuptools should be used rather than PY_SETUPTOOLS

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

devel/py-pyvisa: Update to 1.14.1

Changes:	https://github.com/pyvisa/pyvisa/releases
		https://github.com/pyvisa/pyvisa/blob/main/CHANGES

devel/py-pyvisa: Update to 1.14.0

Changes:	https://github.com/pyvisa/pyvisa/releases
		https://github.com/pyvisa/pyvisa/blob/main/CHANGES

devel/py-pyvisa: Add GitHub to MASTER_SITES

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

devel/py-pyvisa: Convert to USE_PYTHON=pep517

- Bump PORTREVISION for package change

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

devel/py-pyvisa: Update to 1.13.0

- Follow upstream logic: py-pyvisa-py depends on py-pyvisa

Changes:	https://github.com/pyvisa/pyvisa/releases
		https://github.com/pyvisa/pyvisa/blob/main/CHANGES

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

devel/py-pyvisa: Update to 1.12.0

Changes:	https://github.com/pyvisa/pyvisa/blob/main/CHANGES

devel/py-pyvisa: Clean up Makefile after 6c401020d1946446ed7f46742d7dca78c201408f (python36 removal)

Mk: switch PYTHON_REL to 5 digits to support python 3.10.x

PR:		255013
Differential Revision:	https://reviews.freebsd.org/D29418
Exp-run by:	antoine
Approved by:	wen@, no objection from python@ or portmgr@

devel/py-pyvisa: Clean up

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update to 1.11.3

Changes:	https://github.com/pyvisa/pyvisa/releases
		https://github.com/pyvisa/pyvisa/blob/master/CHANGES

Update to 1.11.1

Changes:	https://github.com/pyvisa/pyvisa/releases
		https://github.com/pyvisa/pyvisa/blob/master/CHANGES

Update to 1.11.0

Changes:	https://github.com/pyvisa/pyvisa/releases
		https://github.com/pyvisa/pyvisa/blob/master/CHANGES

Update to 1.10.1

Changes:	https://github.com/pyvisa/pyvisa/releases
		https://github.com/pyvisa/pyvisa/blob/master/CHANGES

Update to 1.10.0

Changes:	https://github.com/pyvisa/pyvisa/releases
		https://github.com/pyvisa/pyvisa/blob/master/CHANGES

Bump a few PORTREVISIONs after r498529

With hat:	portmgr

Cosmetic change

Update to 1.9.1

Changes:	https://github.com/pyvisa/pyvisa/blob/master/CHANGES

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where they now redirect to anyway. All new urls checked to return 200, I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

- Change MASTER_SITES to CHEESESHOP

- Simplify Makefile: use PY_ENUM34
- Update pkg-descr
- Add GitHub repository to WWW
- Take maintainership

Fix build of the python3 flavors

Update to 1.9.0.

Convert Python ports to FLAVORS.

Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

- Add LICENSE - Add NO_ARCH

Reassign makc's ports back to the pool.

See "Maintainer Reset" in
https://www.freebsd.org/portmgr/policies_contributors.html. makc's last commit
was in March 31st (r412218), and his ports have been timing out since at least
July (r418155).

I also emailed him 2 weeks ago and have received no response so far.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Rename my ports to comply with Python ports policy

Requested by:	koobs

Add new ports. devel/pyvisa:

Python bindings to the "Virtual Instrument Software Architecture"
VISA library, in order to control measurement devices via GPIB,
RS232, or USB.

WWW: https://pypi.python.org/pypi/PyVISA

devel/pyvisa-py:

PyVISA-py is a backend for PyVISA.  It implements most of the methods
for Message Based communication (Serial/USB/GPIB/Ethernet) using
Python and some cross platform libraries.

WWW: https://pypi.python.org/pypi/PyVISA-py