devel/py-xxhash: Update to 4.0.1 - Add GitHub to MASTER_SITES Changes: https://github.com/ifduyue/python-xxhash/releases44d2faa133
Port details
devel/py-xxhash4.0.1
Python bindings for the xxHash library
- Maintainer
- sunpoet@FreeBSD.org
- Packages
- py312-xxhash 4.0.1
- Upstream
- Higher version available: 4.0.2
- CPE
- none, CVEs only via VuXML
- WWW
- https://github.com/ifduyue/python-xxhash
- Links
- cgit · VuXML
Unaddressed (0) · The CVE record lists this version as affected, no VuXML entry names the CVE
None. There is no CVE without a VuXML entry for this version.
VuXML only (0) · listed, port not fixed yet
None.
pkg audit reports nothing for this version.Fixed (0)
No VuXML entries for this package.
Commits (38)
devel/py-xxhash: Update to 3.8.1 Changes: https://github.com/ifduyue/python-xxhash/releasesafb5c616a4
devel/py-xxhash: Update to 3.8.0 Changes: https://github.com/ifduyue/python-xxhash/releasesfb7a771c38
devel/py-xxhash: Update to 3.7.0 Changes: https://github.com/ifduyue/python-xxhash/releases6625995c19
devel/py-xxhash: Update to 3.6.0 Changes: https://github.com/ifduyue/python-xxhash/releasesf167ca2dd5
devel/py-xxhash: Update to 3.5.0 Changes: https://github.com/ifduyue/python-xxhash/releases307bd300d0
devel/py-xxhash: Update to 3.4.1 Changes: https://github.com/ifduyue/python-xxhash/releases6b570c15d8
devel/py-xxhash: Update to 3.3.0 - Convert to USE_PYTHON=pep517 Changes: https://github.com/ifduyue/python-xxhash/releasesd124a8225e
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>3d9a815d9cdevel/py-xxhash: Update to 3.2.0 Changes: https://github.com/ifduyue/python-xxhash/releases49823efe72
*/*: rename CHEESESHOP to PYPI in MASTER_SITES PR: 267994 Differential revision: D37518 Approved by: bapt77d68471ad
devel/py-xxhash: update 3.0.0 → 3.1.0 PR: 267499 Approved by: maintainer timeout (sunpoet, 2 weeks)5faabe82e6
Remove WWW entries moved into port Makefiles Commit b7f05445c00f has added WWW entries to port Makefiles based on WWW: lines in pkg-descr files. This commit removes the WWW: lines of moved-over URLs from these pkg-descr files. Approved by: portmgr (tcberner)fb16dfecae
Add WWW entries to port Makefiles It has been common practice to have one or more URLs at the end of the ports' pkg-descr files, one per line and prefixed with "WWW:". These URLs should point at a project website or other relevant resources. Access to these URLs required processing of the pkg-descr files, and they have often become stale over time. If more than one such URL was present in a pkg-descr file, only the first one was tarnsfered into the port INDEX, but for many ports only the last line did contain the port specific URL to further information. There have been several proposals to make a project URL available as a macro in the ports' Makefiles, over time. This commit implements such a proposal and moves one of the WWW: entries of each pkg-descr file into the respective port's Makefile. A heuristic attempts to identify the most relevant URL in case there is more than one WWW: entry in some pkg-descr file. URLs that are not moved into the Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr files in order to preserve them. There are 1256 ports that had no WWW: entries in pkg-descr files. These ports will not be touched in this commit. The portlint port has been adjusted to expect a WWW entry in each port Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as deprecated. Approved by: portmgr (tcberner)b7f05445c0
*: bump PORTREVISION of all devel/xxhash users... ...except archivers/py-borgbackup, which requires a more complete fix.875d7c7d19
devel/py-xxhash: Update to 3.0.0 Changes: https://github.com/ifduyue/python-xxhash/releasese32a08d72f
devel/py-xxhash: Cosmetic change5667a5d8bc
devel/py-xxhash: Add CATEGORIES=python73599498ce
devel/py-xxhash: Update to 2.0.2 Changes: https://github.com/ifduyue/python-xxhash/releasesc73caf2162
One more small cleanup, forgotten yesterday. Reported by: lwhsucf118ccf87
Remove # $FreeBSD$ from Makefiles.305f148f48
Drop python 2.7 support from a few ports With hat: portmgraa7a6c429e
Relax hardcoded paths to fix build with Python 3.8.7 Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the shared libs naming scheme. This means "EXT_SUFFIX" is now derived from SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so". The affected ports strip the libaries in the "post-install" target via hardcoded path(s) and the build fails at the end because the new extension is not expected at this place. Remedy the issue by adding wildcards to these paths. This should also prepare the ports for future Python releases, which will use the new shared libs naming scheme. [1] https://bugs.python.org/issue42604 PR: 252057 Reported by: John Kennedy Reviewed by: fluffy, koobs Approved by: koobs (python)9cb5898561
Update to 2.0.0 Changes: https://github.com/ifduyue/python-xxhash/releasese85070ca9b
Update to 1.4.4 Changes: https://github.com/ifduyue/python-xxhash/releases1e60ca9a9a
Update to 1.4.3 Changes: https://github.com/ifduyue/python-xxhash/releases1c068d12e5
Update to 1.4.2 Changes: https://github.com/ifduyue/python-xxhash/releases https://github.com/ifduyue/python-xxhash/commits/master806dcf3d05
Update to 1.4.1 Changes: https://github.com/ifduyue/python-xxhash/releases https://github.com/ifduyue/python-xxhash/commits/master077798f00b
Update to 1.4.0 Changes: https://github.com/ifduyue/python-xxhash/releases36c90da959
Update to 1.3.0 - Update WWW - Take maintainership Changes: https://github.com/ifduyue/python-xxhash/releases6ecb428e5e
Return rezny@'s ports to the pool after his commit bit got safekept. With hat: portmgr-secretary134ab1ae20
Use PY_FLAVOR for dependencies. FLAVOR is the current port's flavor, it should not be used outside of this scope. Sponsored by: Absolight4376dbbb58
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where they now redirect to anyway. All new urls checked to return 200, I've fixed a couple of them in the process. Approved by: portmgr blanket, matc637402081
Canonicalize PyPi WWWs: - Switch to https:// - Remove trailing slashes Approved by: portmgr blanketd6c95efd94
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
current python flavor. It can be used in dependency lines when the
port itself is not python flavored. For example, deskutils/calibre.
By default, all the flavors are generated. To only generate flavors
for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.
In all the ports with Python dependencies, the *_DEPENDS entries MUST
end with the flavor so that the framework knows which to build/use.
This is done by appending '@${PY_FLAVOR}' after the origin (or
@${FLAVOR} if in a Python module with Python flavors, as the content
will be the same). For example:
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}
PR: 223071
Reviewed by: portmgr, python
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D12464551be3c723Update to 1.0.1 Approved by: feld (mentor) Differential Revision: https://reviews.freebsd.org/D10130f55777607b
Update to 1.0.0 Approved by: swills (mentor) Differential Revision: https://reviews.freebsd.org/D95409367fbc947
devel/py-xxhash: new port py-xxhash is a Python binding for the xxHash library by Yann Collet. WWW: https://pypi.python.org/pypi/xxhash/ Approved by: feld (mentor) Differential Revision: https://reviews.freebsd.org/D94685e0e205ea0