devel/qt5-qdoc-data5.15.19

Qt5: Update to 5.15.19

This is the final release of Qt5. If your port still uses Qt5 and could
possibly use Qt6 instead, now would be a good time to make the switch.

PySide2: Update to 5.15.19

Announcement:
https://lists.qt-project.org/pipermail/announce/2026-May/000626.html
Release notes:
https://code.qt.io/cgit/qt/qtreleasenotes.git/tree/qt/5.15.19/release-note.md

Qt5: Update to 5.15.18

This is the penultimate release of Qt5. While Qt5 is EOL, due to the
LGPL releases being a year behind the commercial releases, there will
still be one more patch release in May 2026.

PySide2: Update to 5.15.18

Announcement:
https://lists.qt-project.org/pipermail/announce/2025-October/000592.html
Release notes:
https://code.qt.io/cgit/qt/qtreleasenotes.git/tree/qt/5.15.18/release-note.md

MFH:		2025Q4

Qt5: Update to 5.15.17 (getting down to the end)

Upstream standard support for Qt5 is officially over. [1] In short,
that means get your ports off of Qt5 ASAP, especially end-user
applications. FreeBSD deprecation of Qt5 is coming soon! It will likely
be a year of lead time, but please help in the meantime and remove qt5
flavors and child ports whenever possible.

www/qt5-webengine has been updated to 5.15.19 with security patches up to
Chromium 135.0.7049.95. It's unclear at this point if further security
patches will be publically available. The Qt5 WebEngine component,
however, is and forever will be based on Chromium 87.0.4280.144, which
is over 4 years old. Props to upstream for their backports over all
these years and making them publically available (probably more to do
with licensing constraints than anything, but hey).

We otherwise depend on KDE as our direct upstream to roll our distfiles,
which we have been hosting locally for over 3 years. Since Qt upstream
drops the LGPL releases of Qt 5.15.x a year later, there's no guarantee
KDE will rebase their patchset over the next year for the remaining two
.18 and .19 releases. This might be the last update for Qt5 on FreeBSD.

[1] https://www.qt.io/blog/qt-5.15-extended-support-for-subscription-license-holders

Qt5: Update to 5.15.16

Update devel/pyside2* and devel/shiboken2 to 5.15.16

Update www/qt5-webengine to include the latest security fixes in
the chromium submodule [1]

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.16/release-note.md

MFH:		2024Q4
Security:	16e472d5-a8aa-11ef-b680-4ccc6adda413 [1]

Qt5: Update to 5.15.15

Update devel/pyside2* and devel/shiboken2 to 5.15.15

Update www/qt5-webengine to include the latest security fixes in
the chromium submodule

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.15/release-note.md

MFH:		2024Q3
Security:	66907dab-6bb2-11ef-b813-4ccc6adda413

Qt5: Update to 5.15.14

Update devel/pyside2* and devel/shiboken to 5.15.14

Update devel/qt5-script* and www/qt5-webengine to 5.15.17

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.14/release-note.md

Qt5: Update to 5.15.13

Update devel/pyside2* and devel/shiboken to 5.15.13

Update www/qt5-webengine to latest commit. Python 3.x support has been
integrated upstream, so local patches have been removed.

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.13/release-note.md

Qt5: Update to 5.15.12

Update devel/pyside2* and devel/shiboken2 to 5.15.12

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.12/release-note.md

Qt5: Update to 5.15.11

Update devel/pyside2* and devel/shiboken2 to 5.15.11

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.11/release-note.md

Qt5: Update to 5.15.10

Update devel/qt5-script* and www/qt5-webengine to 5.15.15-lts
Update devel/pyside2* and devel/shiboken2 to 5.15.10

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.10/release-note.md

PR:		273934
Exp-run by:	antoine

Qt: Update Qt 5 to 5.15.8

- update distfiles to be rebased on the Qt 5.15.8 branch

PR:		268773
Exp-run by:	antoine

Qt5: Update Qt 5 to 5.15.7

* rebase the KDE patched Qt5 ontop of the 5.15.7 branch
* update qt5-script to 5.15.11

Exp-run by:	antoine
PR:		268533

Add missing WWW entries

These ports reference the pkg-descr file of some other port and used
to get the WWW entry from that other port's file.

Reported by:	dan@langille.org (Dan Langille)

qt5: Update Qt to 5.15.5 (KDE patched)

- update patch-collection diff to be at the highest patch-level
- update patch-collection diff to be against 5.15.5 instead of 5.15.2
- update devel/qt5-script to 5.15.10
- libressl support by Felix Palmen <felix@palmen-it.de>

PR:			264944
Exp-run by:		antoine
Differential Revision:	https://reviews.freebsd.org/D35619

Qt: Switch Qt5 to use KDE's Qt patch collection

From [1]
    What's this?

	This is a set of git repositories based on the last public
	commits available for Qt 5.15 branches with a curated collection
	of patches on top to ensure open source products can be used
	comfortably until users transition to their Qt 6-based ports.

    Which patches does it include?

	This collection of patches includes patches that fix at least
	one of the following:

	    * Security issues
	    * Crashes
	    * Functional defects

	We only include patches that have been approved upstream in the
	Qt project. If a patch cannot be merged upstream for technical
	reasons (e.g. the class no longer exists), it can also be
	merged.

	The patches to merge will be decided based on their relevance
	towards Open Source products and their viability.

PR:		260548
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D33446

[1] https://community.kde.org/Qt5PatchCollection

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update Qt5 to 5.14.2

Very big thanks go again to kai@ who provided the www/qt5-webengine upgrade (to 5.14.0).
Notably, video capture support was re-enabled.

Announcement:
        https://www.qt.io/blog/qt-5.14-has-released

PR:		244964
Exp-run by:	antoine

Update Qt5 to 5.13.2

Announcement:
        https://www.qt.io/blog/qt-5.13.2-released

Thanks to kai@ for updating webengine.

PR:		241649
Exp-run by:	antoine

Update Qt5 to 5.12.0

http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/

- This breaks support for libressl again. Patches are welcome.

PR:		233705
Exp-run by:	antoine

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	→https://reviews.freebsd.org/D15540

Update the Qt5 ports to 5.10.1.

The work was done by tcberner and myself, with thanks to antoine for the
exp-run.

Not a lot to report compared to other Qt5 updates:
* net/qt5-network is still broken with LibreSSL. I said this in a commit
  message ages ago but it bears repeating: upstream is open to adding support
  for LibreSSL, but someone needs to step up to maintain it upstream, otherwise
  things will continue to be broken all the time.
* www/qt5-webengine is a huge monster that is terrible to update, just like
  www/chromium itself is. We (kde@) have decided to keep using the 5.9 series
  for the time being, as it should be compatible with the rest of Qt anyway. It
  was updated to 5.9.5, the latest 5.9 release at the time of writing.

PR:		228213

Fix permissions in installed Qt5 header files

For the qt5-* ports bsd.qt.mk sets EXTRACT_AFTER_ARGS, and
thereby does not get the normal default value of
      --no-same-owner --no-same-permissions
passed when extracting. This lead to for example header files
being installed (i.e. copied), with permissions group write
permissions.

Manually append that to the bsd.qt.mk shenanigans (also do the
same in www/qt5-webchannel, which opts out of the bsd.qt.mk value)

PR:		227027
Reported by:	grarpamp@gmail.com

Update the Qt5 ports to 5.6.1.

This took longer than expected, but there are quite a few changes to the
existing ports and a few new ones.

General upstream changes:
- Starting with Qt 5.6.2, Qt will fail at configuration time if LibreSSL is
  being used. According to the discussion here:
  https://codereview.qt-project.org/#/c/154800/
  The Qt project is not opposed to LibreSSL, but does not want to mix
  support for it into the OpenSSL backend code, especially as they move
  towards supporting OpenSSL 1.1.
  People interested in LibreSSL support are welcome to submit a separate
  backend upstream, but are expected to maintain it. We (kde@) are not
  opposed to carrying some patches authored by others in the future, as long
  as they are not huge and destabilizing.
- When Qt detects the compiler supports C++11, it will pass -std=gnu++11 by
  default (this is an upstream change). You can add "CONFIG -= c++11" to
  your .pro. Qt 5.7 will require C++11.
- www/webkit-qt5: The QtWebKit module is deprecated upstream, and is shipped
  separately as a community release tarball. kde@ does not have an ETA for a
  qt5-webengine port, as it requires a huge effort (and number of patches)
  similar to maintaining www/chromium itself.
- x11-toolkits/qt5-declarative has been deprecated upstream. The last
  release is 5.5.1.

Relevant changes:
- devel/qmake5: The freebsd-clang mkspec has become the default mkspec on
  FreeBSD, replacing the outdated freebsd-g++ one that was moved to
  unsupported/ (it still works though).
- devel/qt5-qdoc: qdoc was moved to qttools upstream, but its data files are
  still in qtbase. The data files are now in the qt5-qdoc-data port.
- misc/qt5-doc: Clean up and stop requiring a compiler and fumbling with
  mkspecs. Instead of running the `configure' script, which requires a
  compiler and adjustments to the mkspecs files and also ends up building a
  new qmake binary, we now leverage USES=qmake to generate all the Makefiles
  from the top-level qt.pro. Getting this to work requires some tricks,
  though, and qt.conf.in has a longer explanation of what's being done.
  Switch to USES=gmake to be able to drop MAKE_JOBS_UNSAFE=yes.

New ports:
- comms/qt5-serialbus
- devel/qt5-qdoc-data
- x11-toolkits/qt5-quickcontrols2

Big thanks to Adriaan de Groot (groot@kde.org), tcberner@ and Loise Nolden
(nolden@kde.org) for the huge amount of work they put into this
patch. Loise in particular also sent quite a few changes upstream that were
essential for this update to work.

PR:		211916