editors/p5-Vimana2010.09303_4

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

editors: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohout <shanee@augusta.de>
  *  Andrej Zverev <az@inec.ru>
  *  Andrey Zakhvatov
  *  Anton Tornqvist <antont@inbox.lv>
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Bob Eager <bob@eager.cx>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Chris Petrik <chris@officialunix.com>
  *  Christian Brueffer <chris@unixpages.org>
  *  Craig Leres <leres@FreeBSD.org>
  *  Daniel Eischen <deischen@FreeBSD.org>
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  Diego Depaoli <trebestie@gmail.com>
  *  Dima Dorfman <dima@unixfreak.org>
  *  Dmitri Goutnik <dg@syrec.org>
  *  Dominic Mitchell
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Frederic Cambus
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geoffrey Mainland <mainland@apeiron.net>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Hakisho Nukama <nukama@gmail.com>
  *  James Bailie <jimmy@mammothcheese.ca>
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Jason Evans <jasone@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jille Timmermans (jille@quis.cx)
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Merryweather Cooper et al
  *  Jun-ichiro itojun Itoh <itojun@itojun.org>
  *  KIMURA Yasuhiro <yasu@utahime.org>
  *  Kelly Yancey <kbyanc@posi.net>
  *  Kenneth Vestergaard Schmidt <kvs@pil.dk>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Leif Pedersen <bilbo@devpit.org>
  *  MANTANI Nobutaka <nobutaka@nobutaka.com>
  *  Mark Pulford <mark@kyne.com.au>
  *  Martin Blapp
  *  Matías Pizarro <matias@pizarro.net>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael L. Hostbaek (mich@freebsdcluster.org)
  *  Michael Vasilenko <acid@stu.cn.ua>
  *  Miguel Clara <miguelmclara@gmail.com>
  *  Mohammad S. Babaei <info@babaei.net>
  *  Nicola Vitale <nivit@email.it>
  *  Olga Smirnova <mistresssilvara@hotmail.com>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Olivier Duchateau
  *  Patrick Li <pat@databits.net>
  *  Peter Wemm <peter@FreeBSD.org>
  *  Philippe Lefebvre <nemesis@balistik.net>
  *  Rimvydas Jasinskas <zrj@ef.irc>
  *  Roman Shterenzon <roman@xpert.com>
  *  Satoshi Asami (asami)
  *  Shaun Amott <shaun@FreeBSD.org>
  *  Shigeyuki FUKUSHIMA <shige@FreeBSD.org>
  *  Shigeyuki Fukushima <shige@FreeBSD.org>
  *  Stanislav Sedov <stas@core.310.ru>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Vitaly Magerya <vmagerya@gmail.com>
  *  Xin LI <delphij@FreeBSD.org>
  *  Ying-Chieh Liao
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yoichi NAKAYAMA <yoichi@eken.phys.nagoya-u.ac.jp>
  *  alepulver
  *  brett@peloton.physics.montana.edu
  *  buganini@gmail.com
  *  eric
  *  erich@rrnet.com
  *  gahr
  *  gelf
  *  giffunip@asme.org
  *  ijliao
  *  jkh
  *  joerg
  *  joseph@randomnetworks.com
  *  krion
  *  lightside <lightside@gmx.com>
  *  pgf
  *  rch@richard.eu.org
  *  tetsushi NAKAI <nakai@tsl.pe.u-tokyo.ac.jp>
  *  tg
  *  thierry@pompo.net
  *  torstenb@FreeBSD.org
  *  verm

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Remove Perl core modules

- Add NO_ARCH
- Bump PORTREVISION for dependency change

Use real PORTVERSION and update dependent ports

- Add LICENSE
- Add NO_ARCH

In several dozen ports, use single space for WWW: line in pkg-descr, and reformat port description text in cases when it was notoriously broken.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Fix typos.

Clean up the rest of the perl@ Makefiles a bit.

- Remove dependencies on modules distributed as part of perl core
- Remove references to FreeBSD < 8 and perl < 5.16
- Ensure that DOCS and EXAMPLES options exist for ports installing
  PORTDOCS or PORTEXAMPLES
- Reduce unnecessary inclusions of bsd.port.options.mk by using
  OPTIONS helpers and the like
- Fix some cases where dependencies were only assigned to BUILD_DEPENDS
- Fix a few of the cases where dependencies were only assigned to RUN_DEPENDS.
  This one happens in many, many ports. I only applied it in cases where
  it interfered with 'make test' but it should maybe be done more generally.
- Mute ${MKDIR} in installation
- Parethesize compound commands
- In www/p5-URI-Fetch, remove the ZLIB option that wasn't used

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Take miwi's old perl ports into perl@'s fold.

Sponsored by:	Absolight

Reset miwi's maintainership per his demand

Hope to see you back! Thank for all the work!

Cleanup plist

Support staging.

Add NO_STAGE all over the place in preparation for the staging support (cat: editors)

- convert to the new perl5 framework - trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- update png to 1.5.10

- Fix Dependency

PR:		165563
Submitted by:	swills@

- Replace ../../authors in MASTER_SITE_SUBDIR with CPAN:CPANID macro.   See http://wiki.freebsd.org/Perl for details. - Change maintainership from ports@ to perl@ for ports in this changeset. - Remove MD5 checksum

- Update to 2010.09303

PR:		153075
Submitted by:	pgollucci@

- only 13% of the p5- ports embed @comment $FreeBSD$:   so standarize and remove it

With Hat:   perl@

- /mach/ -> /%%PERL_ARCH%%/

With Hat:   perl@

- Update to 2010.0421

- Remove unneeded dependencies which is in perl-5.8.9 dist   (part 12).

Approved by:	portmgr (itetcu)

- Update to 2010.02301 - Take maintainership

PR:		143124
Submitted by:	Gea-Suan Lin <gslin@gslin.org> (previous maintainer)

- Update to 2009.336031

PR:		ports/141260
Submitted by:	Gea-Suan Lin <gslin@gslin.org> (maintainer)

Vimana is an easy to use system for searching, downloading, and installing vim scripts.

Vimana provides a command-line interface much like the aptitude
program on Debian Linux, for you to search, download, install, and
upgrade scripts from http://www.vim.org/ (vimonline site).

WWW:    http://search.cpan.org/dist/Vimana/

PR:		ports/138158
Submitted by:	Gea-Suan Lin <gslin@gslin.org>