finance/p5-PayflowPro4706

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

finance: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Christopher Boumenot <boumenot@gmail.com>
  *  David Naylor <naylor.b.david@gmail.com>
  *  Dermot Tynan <dtynan@kalopa.com>
  *  Dorit Rottner (<rottner@punkt.de>)
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Glenn Johnson <glennpj@charter.net>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Janky Jay <ek@purplehat.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Reifenberger <mr@freebsd.org>
  *  Mikhail T. <m.tsatsenko@gmail.com>
  *  Mikhail Teterin
  *  Neil Booth
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Qian Jin <eric.siroh@gmail.com>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Trevor Caira <trevor@bitba.se>
  *  Vick Khera <vivek@khera.org>
  *  Vivek Khera <vivek@khera.org>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen heping <wenheping@gmail.com>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zach Thompson <hideo@lastamericanempire.com>
  *  anarcat@anarcat.ath.cx
  *  chinsan
  *  courou <courou@users.sourceforge.net>
  *  ijliao
  *  lth@FreeBSD.org
  *  wcarey
  *  will

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Upgrade to 4706.

PR:		206387
Submitted by:	maintainer

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Support staging and don't install into ${LOCALBASE}

Add NO_STAGE all over the place in preparation for the staging support (cat: finance)

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

- Replace ../../authors in MASTER_SITE_SUBDIR with CPAN:CPANID macro.   See http://wiki.freebsd.org/Perl for details. - Change maintainership from ports@ to perl@ for ports in this changeset.

With perl@ hat

- Update to 3101 - Update WWW and pkg-descr - Changelog: http://cpansearch.perl.org/src/VKHERA/PayflowPro-3101/ChangeLog

PR:		ports/156200
Submitted by:	Vivek Khera <vivek _AT_ khera.org>

- Get Rid MD5 support

- Update to 2111

PR:		136626
Submitted by:	Vick Khera <vivek@khera.org> (maintainer)

- update finance/p5-PayflowPro to latest version to account for change in   URL used by Payflow service.

PR:		ports/122829
Submitted by:	maintainer (Vivek Khera)

Interface to HTTP gateway for PayPal's Payflow Pro service, as described on the PayPal developer forums at http://www.pdncommunity.com/pdn/board?board.id=payflow

This module is intended to be a drop-in replacement for PFProAPI (a couple of
minor changes to your code are necessary to use this module instead of
PFProAPI).  The major difference is that it is pure Perl, and not architecture
dependent (ie, you can use this on your 64-bit FreeBSD platform.)

WWW: http://labs.mailermailer.com/downloads/

PR:		ports/117460
Submitted by:	Vivek Khera <vivek at khera.org>