ftp/curlpp 0.8.1_4

ftp/curlpp: Remove USES=pathfix

ftp/curlpp: Fix build with curl 8.10.0+

Reference:	https://pkg-status.freebsd.org/beefy22/data/140amd64-default/0047206c1c4f/logs/curlpp-0.8.1_4.log

ftp/curlpp: Update WWW and clean up pkg-descr

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

ftp: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Alexander Kriventsov
  *  Anders Nordby <anders@fix.no>
  *  Andreas Fehlner <fehlner@gmx.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Damjan Marion <dmarion@open.hr>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Frank DENIS
  *  Frank Laszlo <laszlof@vonostingroup.com>
  *  Gea-Suan Lin (gslin@ccca.nctu.edu.tw)
  *  Gea-Suan Lin <gslin@ccca.nctu.edu.tw>
  *  George V. Neville-Neil <gnn@FreeBSD.org>
  *  Hye-Shik Chang
  *  Jordan Hubbard <jkh@FreeBSD.org>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Joseph Benden <joe@thrallingpenguin.com>
  *  Ju Pengfei <jupengfei@gmail.com>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Mark Johnston <markj@FreeBSD.org>
  *  Martin Matuska (mm@FreeBSD.org)
  *  Marwan BURELLE <marwan.burelle@lri.fr>
  *  Maxim Ignatenko
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Neil Blakey-Milner
  *  Neil Blakey-Milner <nbm@rucus.ru.ac.za>
  *  Nick Leuta
  *  Nosov Artem <chip-set@mail.ru>
  *  Petr Holub <hopet@ics.muni.cz>
  *  Philippe Le Berre <philippe@le-berre.com>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Roman Bogorodskiy
  *  Sergey Matveychuk <sem@FreeBSD.org>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Stephane Legrand
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tom McLaughlin <tmclaugh@sdf.lonestar.org>
  *  Tomokazu ISHII <t-ishii@tryplanet.com>
  *  Ulrich Spoerlein <uspoerlein@gmail.com>
  *  Wen Heping <wen@FreeBSD.org>
  *  Xavier Beaudouin <kiwi@oav.net>
  *  Yasuhiro Fukuma <yasuf@big.or.jp>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  ache
  *  cy@FreeBSD.org
  *  ijliao
  *  ports
  *  torstenb
  *  will

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Convert PORTDOCS and PORTEXAMPLES to PLIST entries

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Update WWW

Bump PORTREVISION for ports depending on the canonical version of GCC in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Remove leftover of testing

- Bump PORTREVISION for package change

Sort USES

Adjust USES to fix building on gcc-based archs (in particular, powerpc64).

On the clang architectures, these changes have no effect: the baser
compiler already includes the needed features.

While here, remove now-redundant CXXFLAGS statements and pet portlint
(no other content change).

Tested on both powerpc64 and amd64.

Approved by:	portmgr (tier-2 blanket)

Pet portlint: move BROKEN_* upward

Mark some ports failing on power64.  In cases where the error message was a stub, provide a real one.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Update to 0.8.1

Changes:	https://github.com/jpbarrette/curlpp/releases

Update to 0.8.0

Changes:	https://github.com/jpbarrette/curlpp/releases

devel/boost-*: update to 1.63.0

Changes:	http://www.boost.org/users/history/version_1_63_0.html
PR:		215598
Exp-run by:	antoine
Approved by:	office (bapt)
MFH:		2017Q1

Update to 0.7.4

Changes:	https://github.com/jpbarrette/curlpp/releases

devel/boost-*: update to 1.62.0

- Enable `long double` C99 math usage
- Switch 9.x back to building with GCC

Changes:	http://www.boost.org/users/history/
PR:		199601
Submitted by:	Chen Xu, bapt, amdmi3, truckman (based on)
Reviewed by:	rakuco (kde) (earlier version)
Exp-run by:	antoine (3 tries), truckman (consumers only, earlier versions)
Approved by:	bapt (office)

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE_FILE - Use USES=localbase - Convert to new options target helper

- Cleanup GH_* knobs:   - Use DISTVERSIONPREFIX   - Remove GH_PROJECT

- Cleanup WRKSRC: leading v in GH_TAGNAME is removed from DISTNAME in r382120

- Update MASTER_SITES - Use PORTDOCS and PORTEXAMPLES - Update WWW

- Strip shared library

Clean up plist

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

Remove unnecessary inclusion of bsd.port.options.mk.

Approved by:	portmgr (blanket)

- Add LICENSE - Support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat: ftp)

- Fix typo

- Fix build without libstdc++ by removing hardcoded libstdc++ linkage [1] - Convert to new LIB_DEPENDS format - Convert to new OPTIONS simplifier

Reported by:	pkg-fallout [1]

- Update to 7.31.0 - Bump PORTREVISION for ftp/curl shlib change - Add TEST_DEPENDS - Convert to new options framework - Adjust options:   - Add COOKIES   - Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]   - Add GSSAPI and SPNEGO [2]   - Remove KERBEROS4   - Rename LIBIDN to IDN   - Remove TRACKMEMORY [1] - Sort option handler - Add SLAVEDIRS: ftp/curl-hiphop - Cosmetic change - Cleanup

Changes:	http://curl.haxx.se/changes.html
PR:		ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by:	Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by:	miwi

- Remove leading indefinite article from COMMENT - Restore mis-removed tab between USES= and pathfix - Cleanup Makefile header

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- Update MASTER_SITES - Convert to new options framework - Add BOOST option [1] - Respect EXAMPLES - Cosmetic change - Sort PLIST

Requested by:	Brett Gmoser <bgmoser@codexterous.com> [1]

- Take maintainership

Approved by:	roam (maintainer, implicit)

The vast majority of pkg-descr files had the following format when they had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS) - Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:		157936
Submitted by:	myself
Exp-runs by:	pav
Approved by:	pav

- Get Rid MD5 support

Chase the ftp/curl shlib version bump.

Update to curlpp-0.7.3, disabling the Boost interface. Reflect the move to Google Code.

Feature safe:	yes

Bump the version of the curl shared library after the ftp/curl update to 7.19.2. Bump PORTREVISION, even on the ports that do not have a versioned dependency, since the binaries will most probably still stop working.

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script. Specifically, newer autoconf (> 2.13) has different semantic of the configure target. In short, one should use --build=CONFIGURE_TARGET instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:		126524 (obsoletes 52917)
Submitted by:	rafan
Tested on:	two pointyhat 7-amd64 exp runs (by pav)
Approved by:	portmgr (pav)

- Remove USE_GCC where it can be satisfied with base compiler on following   FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

Remove always-false/true conditions based on OSVERSION 500000