Flashcard trainer with spaced repetition
# pkg install ankiinstalls 26.09.3 from latest# cd /usr/ports/games/anki && make install clean# make -C /usr/ports/games/anki config # change options first
The V1 scheduler is no longer supported. If you have not yet updated to V2 or V3, you will be prompted to update when you attempt to review cards in 2.1.50+.
The 2.1.58 release fixes an issue in 2.1.57 that caused cards and deck
presets to be reset to the default ease, if you exported a .colpkg with
compatibility with older clients enabled, or used the downgrade and quit
option, then opened the collection again.
For the former issue, this occurred to the collection you were exporting
from, and not just the .colpkg file. If you were affected by this, running
the following in the debug console after updating should restore your cards
to the ease they were at when you last reviewed them, if they were not
reviewed after the problem occurred. Please make a backup before proceeding.
updated = 0
for cid, old, new in mw.col.db.all("select id, factor, (select factor from revlog where cid=cards.id order by id desc limit 1) as factor2 from cards where type=2"):
if new and old != new:
card = mw.col.get_card(cid)
card.factor = new
mw.col.update_card(card)
updated += 1
print("updated", updated)
It will print the number of updated cards. Instructions how to use the debug
console can be found here:
https://docs.ankiweb.net/misc.html#debug-console| FreeBSD version | amd64 | aarch64 | i386 |
|---|---|---|---|
| FreeBSD 16 | 26.09.3 | ✗ | – |
| FreeBSD 15 | ✗ | ✗ | – |
| FreeBSD 14 | 26.09.3 | ✗ | ✗ |
| FreeBSD version | amd64 | aarch64 | i386 |
|---|---|---|---|
| FreeBSD 15 | 26.09.3 | ✗ | – |
| FreeBSD 14 | 26.09.3 | ✗ | ✗ |
version as in the ports tree (latest) or the most common one (quarterly) · different version · ✗ not built · – no packages for this platform. Package sets that have not been rebuilt for 60 days are left out.
Run and library dependencies of the package on latest. Build dependencies are not in the package index.
No package on latest depends on it.
Packages on latest that depend on it directly.
pkg audit for the packaged version 26.09.3.no CVE referenced
no CVE referenced
| PR | Summary | Status | Changed |
|---|---|---|---|
| 297031 | maintainer-feedback+ games/anki: Very unstable after update to py312 | Open | 2026-10-18 |
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk From now on, ports that depend on Qt4 will have to set USES= qt:4 USE_QT= foo bar ports depending on Qt5 will use USES= qt:5 USE_QT= foo bar PR: 229225 Exp-run by: antoine Reviewed by: mat Approved by: portmgr (antoine) Differential Revision: →https://reviews.freebsd.org/D15540b1a1d38bf9
- Update to 2.0.52 PR: 228678 Submitted by: maintainer Sponsored by: iXsystems Inc.d8c51ca219
Update games/anki to 2.0.51 PR: 226966 Submitted by: freebsd_ports@k-worx.org Approved by: tcberner (mentor) Differential Revision: https://reviews.freebsd.org/D148813727d1e46c
games/anki: Update to 2.0.50 Changelog is in: https://apps.ankiweb.net/docs/changes.html Also updated WWW. PR: 226623 Submitted by: owk <freebsd_ports@k-worx.org> (maintainer)c5b0e0dc4e
games/anki: Update to 2.0.48 This release contains minor bugfixes. PR: 226438 Submitted by: owk <freebsd_ports@k-worx.org> (maintainer) Approved by: tcberner (mentor, implicit)6c94d56b52
games/anki: Update to 2.0.47 Maintainer's timeout expired: trebbu@googlemail.com freebsd_ports@k-worx.org takes maintainership. Port changes: * Updated MASTER_SITES/added DISTNAME * Added to SHEBANG_FILES * Updated patches PR: 225487 Submitted by: owk <freebsd_ports@k-worx.org> Approved by: tcberner (mentor, implicit)fd31774bc8
Reduce dependency on the python2 metaport PR: 225752 Submitted by: Yasuhiro KIMURAf7455240e3
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
current python flavor. It can be used in dependency lines when the
port itself is not python flavored. For example, deskutils/calibre.
By default, all the flavors are generated. To only generate flavors
for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.
In all the ports with Python dependencies, the *_DEPENDS entries MUST
end with the flavor so that the framework knows which to build/use.
This is done by appending '@${PY_FLAVOR}' after the origin (or
@${FLAVOR} if in a Python module with Python flavors, as the content
will be the same). For example:
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}
PR: 223071
Reviewed by: portmgr, python
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D12464551be3c723Chase ffmpeg 3.3 update (ABI changes) PR: 218658 Submitted by: riggsb50a4186ce
Switch ports to use USE_PYQT=<foo> instead of using RUN_- and BUILD_DEPENDS pyqt.mk provides USE_PYQT=<list> to depend on its components. Convert the ports not yet using it to it. Reviewed by: rakuco, mat Approved by: rakuco (mentor) Differential Revision: https://reviews.freebsd.org/D92614c7d30bb70
games/anki: update sqlalchemy dependency to 1.0, bump PORTREVISION PR: 215218 Submitted by: rene Approved by: maintainer timeout (trebbu@googlemail.com, 16 days)338f62891b
- Update to 2.0.36 - While here, fix LICENSE and unhardcode PREFIX PR: 211972 Submitted by: yuri@rawbw.com Approved by: trebbu@googlemail.com (maintainer)60bd4fd519
Reorganise and modernise the py-sqlalchemy ports. - Introduce new ports for the sqlalchemy 0.9 and 1.0 release branches. - Deprecate the ports for the 0.6 and 0.7 release branches, as these have been declared EoL and are no longer supported by upstream. - Update to the latest available version in each branch. In detail: Port Version Maintainer ---------------------------------------------- py-sqlalchemy06 0.6.9 nivit@FreeBSD.org (Deprecate 2016-08-20) [1] py-sqlalchemy07 0.7.10 nivit@FreeBSD.org (renamed py-sqlalchemy, Deprecate 2016-08-20) [1] py-sqlalchemy08 0.8.7 nivit@FreeBSD.org (renamed py-sqlalchemy-devel) [1] py-sqlalchemy09 0.9.10 m.tsatsenko@gmail.com (new, repocopy from py-sqlalchemy-devel) [2] py-sqlalchemy10 1.0.13 m.tsatsenko@gmail.com (new, repocopy from py-sqlalchemy-devel) [2] - Use options-helpers and option dependent make targets. - Use autoplist for documents as well as python code - Add all the docments to the packages: previously an arbitrary subset was added in a way that excluded CSS, images and other HTML assets. - Use TEST_DEPENDS and add a TEST_TARGET instead of having a 'TEST' option. - Use py-pytest for 0.9.x and later, rather than py-nose. - Add CONFLICTS_INSTALL between all of the py-sqlalchemyXY ports. PR: 191442 Submitted by: robak Reviewed by: robak Reviewed by: pi Approved by: nivit (maintainer timeout, ~300days) [1] Approved by: m.tsatsenko@gmail.com (maintainer) [2] Sponsored by: https://reviews.freebsd.org/D908d91eb811d5
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight4e1b79a0a6games/anki: convert to target option helperse72d0c5258
games/anki: update to 2.0.32 PR: 202908 Submitted by: Bert Burgemeister <trebbu@googlemail.com> (maintainer) ChangeLog: - Fixed a syncing bug that could lead to lost reviews and sanity check errors when deleting a filtered deck before syncing. - Make default note type titles consistent (thanks to Soren). - Load saved searches in alphabetical order (thanks to Houssam). - Fix some fields not being renamed in template when renaming field (thanks to Dave). - Fixed an error message that could occur in add-ons (thanks to Thomas) . - Add a few more media types in the file selector (thanks to Jonathan). - Report an error if an add-on download is corrupt. - Fix sync error being shown twice. - Updated translations, thanks to the translators.37f9302fe6
Split devel/gettext in devel/gettext-runtime and devel/gettext-tools. The first contains runtime libraries such as libintl and the latter contains developer tools such as msgfmt. Ports that use gettext will usually need a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools. USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on devel/gettext-runtime and USES=gettext-tools can be used to set a BUILD/RUN_DEPENDS on devel/gettext-tools. USES=gettext is now the same as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools. Update gettext to 0.19.3. Remove :oldver from converters/libiconv and devel/gettext-runtime. Leave symlinks with the old library versions to avoid the need to bump PORTREVISION on a large number of dependent ports. When most of the dependent ports have had normal version updates, PORTREVISION can be bumped on the remaining ones (low number) and the links can be removed. Fix some ports that installed files in lib/locale instead of share/locale. PR: 194038 Reviewed by: bapt Exp-run: antoine Approved by: portmgr (antoine)edb7229dd4
- Pass maintainership to submitter PR: 194943 Submitted by: trebbu@googlemail.comcd73789345
- Update to 2.0.31 PR: 194943 Submitted by: trebbu@googlemail.com0fc8a0e545
- Release ports maintained by games@ games@ team is quite small and inactive, so ports currently assigned to it cannot be assumed as properly maintained. To not cause confusion by making it look otherwise, and also to allow and promote adoption by individual maintainers, release these ports back to the pool. Note that this does not change the fact that games@ team still takes care of these ports to excent of its capabilities. Suggested by: marino075372439e
- Drop @dirrm* from plist - Convert to USES=python - Add LICENSE_FILEc10e6dec62
Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3. Part II, Bump PORTREVISIONs. PR: 192025 Tested by: antoine (-exp runs) Approved by: portmgr (implicit)15945f8122
Convert a bunch of EXTRACT_SUFX=... into USES=tar:... Approved by: portmgr (not really, but touches unstaged ports)a84c115a09
- Update to 2.0.2879b1531ca2
- Update to 2.0.26 - Transfer maintainership to games@ team909dbfce86
- Update to 2.0.244de709f387
- Update to 2.0.2247bd567e1a
- Update to 2.0.21 - Add USES shebangfix and SHEBANG_FILEScd042a944d
- Change REINPLACE_CMD, make PREFIX safe Reported by: makc22f9063a48
- Update to 2.0.20 - Fix the usage of 'python' to get rid of the implicit lang/python dependency - Use REINPLACE_CMD instead of simple patches5ba0399099
Python cleanup: - USE_PYTHON* = 2.X -> USE_PYTHON* = 2 - USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes Reviewed by: python (mva, rm) Approved by: portmgr-lurkers (mat)50f8eaece1
- Bump PORTREVISION - Use patches instead of REINPLACE_CMD, for upstream - Cleanup Makefile, add patches, use Port Makefile - Change pkg-plist, adjust NLS Approved by: pawel / wg (mentors, implicit)9313a366e5
- Update to 2.0.19 - Fix NLS, add Option - Break lines around 80 characters Reviewed by: Horia Racoviceanu <horia@racoviceanu.com> Approved by: pawel / wg (mentors, implicit)483ede7128
- Update to 2.0.18 Approved by: pawel / wg (mentors, implicit)0f06cd2d90
- Remove manual creation and removal of share/applications, as it's now in the mtree (games category) Approved by: portmgr (bdrewery)c87a56b351
- Update to 2.0.14 Approved by: pawel (mentor)a9546cb301
- Update to 2.0.13 - Change maintainer email to @FreeBSD.org - Add dependencies for audio/lame and multimedia/mplayer - Support STAGEDIR Approved by: wg/pawel (mentors)80f0656871
www/py-beautifulsoup32: bump port revision - Bump port revision due to package name change - Catch up package name of ports that depend on it1e6f5e0052
Add NO_STAGE all over the place in preparation for the staging support (cat: games)c84e1cd8e6
Update to version 2.0.12 PR: ports/180812 Submitted by: nemysis <nemysis@gmx.ch> (maintainer)58d40a63d2
games/anki: update to 2.0.11 - Update to 2.0.11 - USES desktop-file-utils and shared-mime-info PR: ports/179106 Submitted by: nemysis <nemysis gmx.ch> (maintainer)f5c14ce459
- Convert USE_GETTEXT to USES (part 2) Approved by: portmgr (bapt)5003029118
- Update to 2.0.8 PR: 175988 Submitted by: maintainer8f348ee109
Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update. x11-toolkits/py-qt: - mark BROKEN: does not build with latest devel/py-sip3503833535
- update to 2.0.7 PR: 175706 Submitted by: nemysis <nemysis@gmx.ch> (maintainer)a0054f26b3
Update to 2.0.6 Simplify makefile, add python to category and numeros other improvments. Pass maintainership to submitter. PR: ports/175366 Submitted by: nemysis <nemysis@gmx.ch> Approved by: kwm, miwi (mentors, implicit)7ceb9c4d35
- Project games/py-anki was merged with games/anki. - Update UPDATING and MOVED files.eea4e9f3da
- Update to 2.0.4. - Trim header. PR: ports/172506 Submitted by: KATO Tsuguru <tkato432@yahoo.com>52fe4e2e94
- according to [1] py-anki had switched to SQLAlchemy 0.7 since version 1.2.9, so change the dependency While I'm here: - strict python version to 2.x only - eliminate unused dependencies - use PYTHON_PKGNAMEPREFIX in _DEPENDS - add missing tabs - bump PORTREVISION because of dependencies change [1] http://ankisrs.net/changes.html PR: 168555 Submitted by: Jan Beich <jbeich at tormail dot org>dab0cfc060
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4 Review by: bapt, David Naylor (kde team)9c2f65e395