graphics/geos 3.15.0

- Use INSTALL_TARGET=install-strip

- Use USES=python

- Fix PLIST

Reported by:	pi

- Add missing USE_LDCONFIG - Use USES=libtool - Fix USE_PYTHON - Convert to new options helper - Bump PORTREVISION for package change - Do not hard-coded PORTVERSION in PLIST - Bump PORTREVISION for graphics/geos shlib change

- Update WWW - Take maintainership

graphics/geos: Fix PHP option, reset mainatainer

The PHP option was hardcoded to lang/php5, but it reportedly works on other
versions of PHP.  It also installs a PHP module, so it should have had a
run depends on PHP as well as a build depends (hence the revump)

Also:
  * Remove USE_LDCONFIG, I don't see why it's here
  * convert USE_BZIP2
  * Reset maintainer due to history of timeouts and non-responsiveness to
    this PR
  * respect 80 columns

PR:		178431
Submitted by:	mcdouga9 (egr.msu.edu)
Fixes by:	marino

- Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat: graphics)

graphics/geos: update to 3.4.2

- Update to 3.4.2
- Do not bump dependent ports as 3.4.1 did a little while ago

PR:		ports/181422
Submitted by:	Rainer Hurling <rhurlin gwdg.de> (maintainer)

graphics/geos: update to 3.4.2

- Update to 3.4.2 [1]
- Bump PORTREVISION for dependent ports
- USES gmake
- Use options helpers

PR:		ports/181422 [1]
Submitted by:	Rainer Hurling <rhurlin gwdg.de> (maintainer)

- Update to 3.3.8

PR:		ports/176635
Submitted by:	Rainer Hurling <rhurlin@gwdg.de>
Approved by:	Maintainer timeout

- Update to version 3.3.7 [1] - Convert to OptionsNG

PR:		ports/175623 [1]
Submitted by:	Rainer Hurling <rhurlin@gwdg.de>
Approved by:	maintainer timeout

- Update to 3.3.3

PR:		166789
Submitted by:	Wen Heping (myself)
Approved by:	maintainer(timeout, >20 days)

- Update to 3.3.1 - Add option for ruby and php

PR:		161844
Submitted by:	Bartoletti <coder@tuxfamily.org>
Approved by:	maintainer(timeout, >2 months)

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

- Enable python bindings. - Canonicalize case in Makefile. - Add explicit GNU_CONFIGURE (though USE_AUTOTOOLS=libtool implies it, it's   unapparent and confusing). - Sort plist. - Bump portrevision.

PR:		ports/160406
Submitted by:	Dmitry Marakasov <amdmi3@amdmi3.ru>
Approved by:	Konstantin Saurbier <konstantin@saurbier.net> (maintainer)

- Fix lib so we don't break other ports - Bump PORTREVISION

PR:		ports/158263
Submitted by:	Rainer Hurling <rhurlin@gwdg.de>

- Update to 3.3.0

PR:		ports/158263
Submitted by:	Rainer Hurling <rhurlin@gwdg.de>
Approved by:	Konstantin Saurbier <konstantin@saurbier.net> (maintainer)

Sync to new bsd.autotools.mk

- Update to 3.2.2 - While I'm here, add LICENSE and remove DISTNAME assignment which is already   done by bsd.port.mk

Changes:

3.2.2:
- Bug fixes:
  * CAPI: do not leak contexts when using the non-reentrant interface

3.2.1:
- Bug fixes:
  * False positive return from IsValidOp (#333)
  * Return up to 15 digits of precision from GEOSisValidReason_t (#329)

PR:		ports/151875
Submitted by:	Rainer Hurling <rhurlin@gwdg.de>
Approved by:	Konstantin Saurbier <konstantin@saurbier.net> (maintainer)

- Update to 3.2.0

PR:		ports/141656
Submitted by:	Konstantin Saurbier <konstantin@saurbier.net> (maintainer)

- Update to 3.1.1

PR:		137343
Submitted by:	Konstantin Saurbier <konstantin@saurbier.net> (maintainer)

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

- Update to 3.1.0

PR:		133107
Submitted by:	Wen Heping <wenheping@gmail.com>
Approved by:	maintainer

- Update to 3.0.3 - Install GeometrySnapper.h header

PR:		ports/131421
Submitted by:	Konstantin Saurbier <konstantin@saurbier.net> (maintainer)

- Update to 3.0.2

PR:		128778
Submitted by:	Wen Heping <wenheping@gmail.com>
Approved by:	maintainer

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script. Specifically, newer autoconf (> 2.13) has different semantic of the configure target. In short, one should use --build=CONFIGURE_TARGET instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:		126524 (obsoletes 52917)
Submitted by:	rafan
Tested on:	two pointyhat 7-amd64 exp runs (by pav)
Approved by:	portmgr (pav)

- Remove USE_GCC where it can be satisfied with base compiler on following   FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

- Update to 3.0.0

PR:		ports/120496
Submitted by:	Konstantin Saurbier <saurbier@math.uni-bielefeld.de> (maintainer)

- Add ports to "geography" virtual category

Approved by:	Pav (wearing portmgr hat)

Use libtool port instead of included version to avoid objformat a.out botch

- Update to 2.2.3

PR:		ports/102520
Submitted by:	Konstantin Saurbier <saurbier(at)math.uni-bielefeld.de> (maintainer)
Approved by:	krion (mentor)

Update to 2.2.2

PR:		ports/98487
Submitted by:	miwi
Approved by:	krion (mentor), maintainer

- Update to 2.2.1 - Fixes build problems on 4.x

PR:		91677
Submitted by:	saurbier@math.uni-bielefeld.de (maintainer)

Mark broken on 4.x: C++ code does not compile.

Reported by:	kris
Approved by:	Konstantin Saurbier <saurbier@math.uni-bielefeld.de> (maintainer)

- Update to 2.2.0. - Submitter takes maintainership.

PR:		ports/90049
Submitted by:	Konstantin Saurbier <saurbier@math.uni-bielefeld.de>

- Update to 2.1.4

PR:		ports/89459
Submitted by:	Konstantin Saurbier <saurbier@math.uni-bielefeld.de>

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present in bsd.autotools.mk essentially makes this a no-op given that all the old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
	http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Reset bouncing maintainer addresses.

Hat:		portmgr
Source:		Edwin's updated distfile tracker

At Kris's request, back out the MACHINE_ARCH spelling correction until after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 2.0.1

PR:		ports/73614
Submitted by:	Sam Lawrance <boris@brooknet.com.au>
Approved by:	Leonardo Martins <lmartins@nepe.eee.ufg.br> (maintainer)

Add size data, approved by maintainers.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

New port: graphics/geos implements all OpenGIS "Simple Features for SQL"

GEOS (Geometry Engine - Open Source) is a C++ port of the
	Java Topology Suite (JTS). As such, it aims to contain the
	complete functionality of JTS in C++. This includes all the
	OpenGIS "Simple Features for SQL" spatial predicate functions
	and spatial operators, as well as specific JTS topology
	functions such as IsValid().

	More precisely, GEOS is a library containing functions which
	implement OpenGIS specifications concerning operations on
	geometric objects. Despite its categorization in the graphics
	subdirectory, it is more suitable in a "gis" category for
	Geographical Information Systems software. I would like to
	suggest the ports team to create such category because of
	the so many free software available on the internet. Please,
	look at www.freegis.org. I am working on porting several
	of them to make FreeBSD ready-for-GIS. Feel free to contact
	me for more information.

PR:		ports/60405
Submitted by:	Leonardo Martins <lmartins@nepe.eee.ufg.br>