graphics/py-fiona1.10.1_5

graphics/gdal: Update to 3.13.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.13/NEWS.md

graphics/gdal: Update to 3.12.2

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.12/NEWS.md

Mk/Uses/python.mk: Remove USE_PYTHON=cython3{,_run,_test}

- Convert all cython3 occurrence to USE_PYTHON=cython*
- Bump PORTREVISION dependent ports of USE_PYTHON=cython_run for dependency change

PR:		291778

graphics/py-fiona: Allow build with cython 3.1.0+

- Bump PORTREVISION for package change

graphics/gdal: Update to 3.11.0

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.11/NEWS.md

graphics/py-fiona: fix import

PR:		285654
Reported by:	Kyle Taylor <kyle.a.taylor@gmail.com>
Reviewed by:	rhurling

graphics/py-fiona: Update to 1.10.1

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

graphics/gdal: Update to 3.10.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.10/NEWS.md

graphics/gdal: Update to 3.9.0

- Bump PORTREVISION of dependent ports for shlib change
  - databases/postgis31 is skipped due to
  - graphics/R-cran-rgdal is skipped due to build failure and removed from CRAN repository

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.9/NEWS.md

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

graphics/gdal: Update to 3.7.0

Changes:	https://github.com/OSGeo/gdal/releases
		https://github.com/OSGeo/gdal/blob/release/3.7/NEWS.md

devel/py-shapely: Fix PORTNAME and WWW

- Bump PORTREVISION for package change

It is to minimize the patch of 2.0.1 update. Upstream also changed the tarball
from Shapely to shapely.

Approved by:	portmgr (blanket)
With hat:	python

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

graphics/py-fiona: Update to 1.8.22

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

*/*: bump all consumers after recent boost upgrade

*/*: fix trailing whitespace in pkg-descr's

Approved by:	portmgr blanket

graphics/py-fiona: Update to 1.8.21

Changes:
  - https://github.com/Toblerity/Fiona/blob/1.8.21/CHANGES.txt

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
cannot conflict with itself (due to logic in bsd.port.mk that
supresses the pattern match result in that case).

A few ports that set the conflicts variables depending on complex
conditions (e.g. port options), have been left unmodified, despite
probably containing outdated package names.

These changes should only affect the installation of locally built
ports, not the package building with poudriere. They should give an
early indication of the install conflict in cases where currently
the pkg command aborts an installation when it detects that an
existing file would be overwritten,

Approved by:	portmgr (implicit)

graphics/py-fiona: Update to 1.8.20

Changes:
  - https://github.com/Toblerity/Fiona/blob/1.8.20/CHANGES.txt

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

graphics/gdal: Set the default options as a workable set

- reinstate r552962 (was reverted in r553000)
- remove pkg-message from qgis and qgis-ltr
- Bump PORTREVSION on all consumers

PR:		224004
Approved by:	portmgr

Remove empty PY_ENUM34 from ports using Python 3.6+

Drop python 2.7 support from a few ports

With hat:	portmgr

graphics/py-fiona: Update to 1.8.18

- The precision option of transform has been fixed for the case of
  GeometryCollections.
- Added missing --co (creation) option to fio-load.
- If the certifi package can be imported, its certificate store location will
  be passed to GDAL during import of fiona._env unless CURL_CA_BUNDLE is
  already set.
- Warn when feature fields named "" are found.

Reported by:	portscout

graphics/py-fiona: Add two dependencies

- Add graphics/py-gdal and devel/py-attrs

Reported by:	phryk@wzff.de

graphics/py-fiona: Update to 1.8.17

Changelog:

- 1.8.17 (2020-09-09)
  - To fix issue #952 the fio-cat command no longer cuts feature geometries at the anti-meridian by default.
  - A cut-at-antimeridian option has been added to allow cutting of geometries in a geographic destination coordinate reference system.

- 1.8.16 (2020-09-04)
  - More OGR errors and warnings arising in calls to GDAL C API functions are surfaced (#946).
  - A circular import introduced in some cases in 1.8.15 has been fixed (#945).

- 1.8.15 (2020-09-03)
  - Change shim functions to not return tuples (#942) as a solution for the packaging problem reported in #941.
  - Raise a Python exception when VSIFOpenL fails (#937).

graphics/py-fiona: Update to 1.8.14

graphics/py-fiona: Update to 1.8.13

Reported by:	phryk@wzff.de
Differential Revision:	https://reviews.freebsd.org/D25471

Bump PORTREVISION for graphics/gdal shlib change

Change my mail address to lbartoletti@FreeBSD.org

Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D23169

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Update WWW

Approved by:	portmgr (blanket)

This port requires a C++11-compatible compiler.  Add USES=compiler:c++11-lang to fix build on GCC-based architectures.

PR:		234946
Submitted by:	Piotr Kubaj
Approved by:	maintainer

Update to 2.4.0

- Update MASTER_SITES
- Add ZSTD option

Changes:	https://trac.osgeo.org/gdal/wiki/Release/2.3.0-News
		https://trac.osgeo.org/gdal/wiki/Release/2.3.1-News
		https://trac.osgeo.org/gdal/wiki/Release/2.3.2-News
		https://trac.osgeo.org/gdal/wiki/Release/2.3.3-News
		https://trac.osgeo.org/gdal/wiki/Release/2.4.0-News
PR:		231629
Exp-run by:	antoine

graphics/py-fiona: update to 1.7.13

PR:		230809
Submitted by:	lbartoletti@tuxfamily.org (maintainer)

s/FLAVOR/PY_FLAVOR/.

Pointy hat:	wen
Sponsored by:	Absolight

Fiona is designed to be simple and dependable. It focuses on reading and writing data in standard Python IO style and relies upon familiar Python types and protocols such as files, dictionaries, mappings, and iterators instead of classes specific to OGR. Fiona can read and write real-world data using multi-layered GIS formats and zipped virtual file systems and integrates readily with other Python

WWW: https://pypi.python.org/pypi/fiona

PR:		228665
Submitted by:	lbartoletti@tuxfamily.org