graphics/py-geomdl5.2.10_5

*/*: bump PORTREVISION after switching to NumPy 2.x

*/*: Switch to NumPy 2.x

PR:		294328
Exp-run:	antoine

math/py-numpy: switch all consumers to math/py-numpy1

...and bump PORTREVISIONs of consumers with hard RUN_DEPENDS

PR: 281470

all: bump PORTREVISION after updating graphics/libyuv

Using the Tools/scripts/bump_revision.pl script

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

math/py-matplotlib: chase minimum Python version in dependent ports

Since the previous update changed USES=python from 3.6+ to 3.7+, all
dependent ports must have USES=python:3.7+ as well, otherwise it breaks
the @py36 flavor.

PR:		255347
Reported by:	sunpoet

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Unbreak bulk -a

Update graphics/py-geomdl to 5.2.10

Reported by:	portscout
Approved by:	tcberner (implicit)

Change my mail address to lbartoletti@FreeBSD.org

Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D23169

graphics/py-geomdl: Update to 5.2.9

PR:		240623
Submitted by:	Loïc Bartoletti <lbartoletti@tuxfamily.org> (maintainer)
MFH:		2019Q4
Relnotes:	https://github.com/orbingol/NURBS-Python/blob/master/CHANGELOG.md#v529-released-on-2019-09-10

Update to 5.2.8

Changes:	https://github.com/orbingol/NURBS-Python/releases
PR:		239455
Submitted by:	Loic Bartoletti <lbartoletti@tuxfamily.org> (maintainer)

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Introduce PY_TYPING and simplify Makefile

Since devel/py-promise requires 3.6.4+, the minimal version is set to 3.6.4.

With hat:	python

graphics/py-geomdl: update to 5.2.4

PR:		237787
Submitted by:	lbartoletti <lbartoletti@tuxfamily.org> (maintainer)

- Update WWW

Approved by:	portmgr blanket

New port: graphics/py-geomdl

NURBS-Python (geomdl) is a pure Python, self-contained, object-oriented
B-Spline and NURBS spline library for Python versions 2.7.x, 3.4.x and later.

NURBS-Python (geomdl) provides convenient data structures and highly
customizable API for rational and non-rational splines along with the
efficient and extensible implementations of the following algorithms:

- Spline evaluation
- Derivative evaluation
- Knot insertion
- Knot removal
- Knot vector refinement
- Degree elevation
- Degree reduction
- Curve and surface fitting via interpolation and least squares approximation

NURBS-Python (geomdl) also provides customizable visualization and animation
options via Matplotlib, Plotly and VTK libraries.

WWW: https://onurraufbingol.com/NURBS-Python

PR:		236457
Submitted by:	lbartoletti@tuxfamily.org
Approved by:	mentors (implicit)