lang/tcc0.9.26_7

MAN[1-5]PREFIX: eleminate its usage  and move man to share/man

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Back to the pool

Fix WWW

Approved by:	portmgr (blanket)

- Remove always true OSVERSION condition - While here, minor consmetic fixes

Approved by:	portmgr blanket

- Remove bogus (in presence of USE_GITHUB) USES=tar* - While here, minor cosmetic and license fixes

Approved by:	portmgr blanket

- Add LICENSE_FILE - Add PORTSCOUT to ignore invalid version - Update WWW in pkg-descr - Bump PORTREVISION

Reviewed by:	feld (mentor)
Approved by:	feld (mentor)
Differential Revision:	D7292

Github cleanup.

- Use the version tag instead of commit hash when they're the same.
- Remove unnneeded variables.
- Simplify go- ports when possible.
- Various fixes.

Sponsored by:	Absolight

- Fetch from GITHUB - Update MAINTAINER to my @FreeBSD.org address - Fix tcc-doc.html generation - Remove CONFLICTS because TenDRA port was deprecated some time ago - Use post-install-DOCS-on target - Use post-install-EXAMPLES-on target - Bump PORTREVISION

Reviewed by:	amdmi3, junovitch (mentors)
Approved by:	amdmi3, junovitch (mentors)
Differential Revision:	D6314

lang/tcc: fix stdio.h bug

PR:		202093
Submitted by:	Carlos J Puga Medina <cpm@fbsd.es> (maintainer)
MFH:		2015Q3

lang/tcc: add amd64 support

- Add amd64 support
- Fix shebang in texi2pod.pl
- Fix pkg-plist
- Bump PORTVERSION

PR:		201749
Submitted by:	Carlos Jacobo Puga Medina <cpm@fbsd.es> (maintainer)

Cleanup plist

- Update MAINTAINER

PR:		ports/192902
Submitted by:	Carlos Jacobo Puga Medina <cpm@fbsd.es> (maintainer)

- Fix plist - Add INFO macro and USES=makeinfo to make it also work on revent head - Clean up Makefile

PR:		192137
Submitted by:	Carlos Jacobo Puga Medina <cjpugmed@gmail.com> (maintainer)

lang/tcc: Update version 0.9.25 => 0.9.26 and assign maintainer

PR:		191154
Submitted by:	Carlos Jacobo Puga Medina
Verified by:	Redports x4 (i386-only)

Stafigy; clean up the Makefile and port description while here.

Add NO_STAGE all over the place in preparation for the staging support (cat: lang)

- Convert to new perl framework - Remove MAKE_JOBS_SAFE=yes, it's the default.

- Restore PORTREVISION

- Update to 0.9.25

PR:		176551
Submitted by:	Ports Fury

- drop maintainership Feature safe: yes

- cleanup comments Feature safe: yes

- honor PREFIX PR:		161944 Submitted by:	Nali Toja

- remove MD5

Update files/README.tccelf files/patch-libtcc.c to reflect some fixes i made recently. Add files/patch-z1-preproc which implements -include, -M and some related preprocessing macros to improve portability Bump portrevision accordingly

Should close PR/141185

- fix segfaults for linked elfs binaries PR:		138481 Submitted by:	Luigi Rizzo

- add experimetal support for new archs

- update to  0.9.25 http://bellard.org/tcc/changelog.html

- add CONFLICTS with lang/TenDRA PR:		130167

- set ONLY_FOR_ARCHS i386

Tiny C Compiler

Features:
* SMALL! You can compile and execute C code everywhere, for example on rescue
  disks (about 100KB for x86 TCC executable, including C preprocessor,
  C compiler, assembler and linker).
* FAST! tcc generates x86 code. No byte code overhead. Compile, assemble and
  link several times faster than GCC.
* UNLIMITED! Any C dynamic library can be used directly. TCC is heading torward
  full ISOC99 compliance. TCC can of course compile itself.
* SAFE! tcc includes an optional memory and bound checker. Bound checked code
  can be mixed freely with standard code.
* Compile and execute C source directly. No linking or assembly necessary.
  Full C preprocessor and GNU-like assembler included.
* C script supported : just add '#!/usr/local/bin/tcc -run' at the first line
  of your C source, and execute it directly from the command line.
* With libtcc, you can use TCC as a backend for dynamic code generation.

WWW: http://bellard.org/tcc/

Remove expired port:

2006-12-01 lang/tcc: is only for i386, and you are running amd64.

Approved by:	erwin (mentor, implicit)

Schedule these ignored ports for termination on 2006-12-01

Change BROKEN to IGNORE to prevent package build

Register a conflict with TenDRA-4*.

Reminded by:	Volker Stolz <stolz at i2.informatik.rwth-aachen.de>

Mark this port as BROKEN till -c compilation is fixed.

Submitted by:	<serge.gagnon at b2b2c.ca> Serge Gagnon,
		Zahemszky Gábor <Gabor at Zahemszky.HU>

Correct a plist error.

Reported by:	kris

A new port for TinyCC, a small and fast C compiler.

Tcc's features include:
  * Small: You can compile and execute C code everywhere, for
    example on rescue disks (about 100KB for x86 TCC executable,
    including C preprocessor, C compiler, assembler and linker).
  * Fast: tcc generates optimized x86 code. No byte code overhead.
    Compile, assemble and link several times faster than GCC.
  * Unlimited: Any C dynamic library can be used directly. TCC is
    heading torward full ISOC99 compliance. TCC can of course compile
    itself.
  * Safe: tcc includes an optional memory and bound checker. Bound
    checked code can be mixed freely with standard code.
  * Compile and execute C source directly. No linking or assembly
    necessary. Full C preprocessor and GNU-like assembler included.
  * C script supported : just add '#!/usr/local/bin/tcc -run' at
    the first line of your C source, and execute it directly from the
    command line.
  * With libtcc, you can use TCC as a backend for dynamic code
    generation.