mail/dspam-devel

mail/dspam-devel: merged with mail/dspam

PR:		193693
Submitted by:	danny@dannywarren.com (maintainer)

Danny takes maintainership

databases/sqlite2: - Convert to USES=libtool and bump dependent ports

In some straightforward situations, protect examples behind PORTEXAMPLES, adding EXAMPLES to OPTIONS_DEFINE where necessary. In a couple instances, correct examples being controlled by the DOCS option.

net/openldap24-*: - Convert to USES=libtool and bump dependent ports - Avoid USE_AUTOTOOLS - Don't use PTHREAD_LIBS - Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

databases/libgdamm:
- Drop :keepla
- USES=tar:bzip2
- Use INSTALL_TARGET=install-strip

databases/libgdamm5:
- Add INSTALL_TARGET=install-strip
- Drop --enable-static (inherited from old repocopy)

devel/anjuta x11-toolkits/py-gnome-extras:
- Drop :keepla

dns/powerdns dns/powerdns-devel:
- Convert to USES=libtool
- Add INSTALL_TARGET=install-strip
- Disable static modules
- Stop creating library symlinks with .0 suffix, not needed for dynamically
  opened modules

mail/dovecot2:
- Add USES=libtool

mail/dovecot2-pigeonhole:
- Drop CONFIGURE_TARGET (incorrect for Dragonfly)
- Add USES=libtool and INSTALL_TARGET=install-strip

math/gnumeric:
- USES=libtool tar:xz

Approved by:	portmgr (implicit, bump unstaged ports)

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

mail/dspam-devel: also set mode/owner/group for bin/dspam, bump PORTREVISION

PR:		191797
Submitted by:	raivo.hool@gmail.com
MFH:		2014Q3

- Fix pkg installation where the dspam user/group/ are non-default. - Bump PORTREVISION PR:		191797 Submitted by:	raivo.hool@gmail.com MFH:		2014Q3

mail/dspam-devel: Mark jobs unsafe (dports)

- reset maintainer due to multiple timeouts [1] - stage support - remove optional dependencies on expired Cyrus 2.1 / 2.2 - USES=libtool shebangfix - replace several WITH and USE knobs by corresponding port options - use modern LIB_DEPENDS - rewrite message to avoid NOPORTDOCS - use @sample for dspam.conf.sample - pet portlint - bump PORTREVISION

Approved by:	portmgr (bapt) [1]

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Retire security/clamav-devel, clamav is not being updated that much nowadays, so a -devel version is not required anymore. Also removed OPTIONS on other ports that pointed to clamav-devel as a dependency.

Approved by:	portmgr (implict)

Add NO_STAGE all over the place in preparation for the staging support (cat: mail)

- convert to the new perl5 framework - remove redundant perl usage, since we use it already in global context

Approved by:	portmgr (bapt@, blanket)

- fix PORT_OPTIONS s/)/}/

-another conversion fix for PGSQL

Reported by: qat

- DB selection needs to be OPTIONS_MULTI

- fix conversion of PGSQL

- adoption of optionsNG

Approved by:	portmgr (bapt)

Remove MySQL 5.0, it has been unsupported upstream for about 1.5 years

Approved by:    ale (maintainer)

- remove www/apache20 and devel/apr0 - s/USE_APACHE= 20+/USE_APACHE= 22+/ - unify s/YES/yes/ - cleanup APACHE_VERSION <= 22 usage - add entry to MOVED

with hat apache@

- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)

In the rc.d scripts, change assignments to rcvar to use the literal name_enable wherever possible, and ${name}_enable when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

- change required APACHE version from 13+ to 20+   (prepare to remove www/apache13)

- no PORTREVISION bump since apache22 is the default

with hat apache@

- bump PORTREVISION from ports if USE_APACHE=13+ or 20+ is defined

Update to 3.10.1, which fixes MySQL queries problems introduced in 3.10.0

MFC after:	5 days

Fix the fix

Fix port after I moved '-devel' to PKGNAMESUFFIX.

Reported by:	bapt@

Update to the official 3.10.0 release

MFC:		1 day

Update to 3.10.0 rc1, which is pretty much the upcoming 3.10.0 release, so unIGNORE.

Adjust the port to be closer to mail/dspam.

- remove MD5

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:	portmgr (for Mk/bsd.port.mk part)
Tested by:	Multiple -exp runs

Chase clamav's lib bump

Begin the process of deprecating sysutils/rc_subr by s#. %%RC_SUBR%%#. /etc/rc.subr#

Mark ignore until we get out a new devel release.

- Mark MAKE_JOBS_UNSAFE

Reported by:	pointyhat

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

- Bump necessary PORTREVISIONS and fix some ports to new clamav API

- Update security/clamav to 0.94 [1] and fix a remote DoS [2] - Chase libclamav version bump on all dependant ports - Bump necessary PORTREVISIONS - Fix some BROKEN messages from ports that were already broken with clamav-0.93 - Mark security/klamav as BROKEN since it doesn't build with clamav-0.94

PR:		ports/127122 [1], ports/127310 [2]
Submitted by:	Gary Palmer <freebsd-gnats@in-addr.com> [1], delphij [2]
Approved by:	portmgr (pav)

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script. Specifically, newer autoconf (> 2.13) has different semantic of the configure target. In short, one should use --build=CONFIGURE_TARGET instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:		126524 (obsoletes 52917)
Submitted by:	rafan
Tested on:	two pointyhat 7-amd64 exp runs (by pav)
Approved by:	portmgr (pav)

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:	exp build run (erwin)

- Builds on 7.x and up

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1] - Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG - Remove X11BASE support in favor of LOCALBASE or PREFIX - Use USE_LDCONFIG instead of INSTALLS_SHLIB - Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
	Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
	ehaupt, nox, itetcu, flz, pav

PR:		116263
Tested on:	pointyhat
Approved by:	portmgr (pav)

Adjust MASTER_SITES to an other server of mine

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:		ports/116639
Submitted by:	aDe

Update to 3.8.0

- Official "stable" release
- fixed message corruption problems with direct delivery (when using direct
delivery (e.g. DeliveryHost), certain servers require a linefeed after
carriage return otherwise the message will become malformatted).
- added a patch to fix CRLF pairs that are not correctly stripped out when
saving the message to the quarantine mbox file; useful if using LMTP or
SMTP (as opposed to running the client directly from a delivery script),
*AND* you are using the quarantine feature [1] I'm interested if anything
breaks in the WebUI if you're not using either SMTP or LMTP.

[1] patch from John Peacock <jpeacock@rowman.com>
    http://mailing-list.nuclearelephant.com/6023.html