math/PDL

chase math/gsl lib version

- Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Builds on amd64

Noted by:   kris
Approved by:	portmgr (kris)

- Update to 2.4.3 - patch-aa to patch-perldl.conf with minor modification - patch-Lib::Slatec::Makefile.PL removed   hack in Makefile.PL resolve x86_64 systems problem.

Respect DESTDIR

PR:		101851
Submitted by:	Gea-Suan Lin <gslin@gslin.org>

Add support for DESTDIR part I.

This commit should largele be a NOOP as it only adds support
for DESTDIR undefined. This does allow us to start testing
ports with DESTDIR set, but this is as of yet not supported.

Although this has been extensively tested on pointyhat, this
is a very intrusive change and some cases may have been
overlooked. Please contact Gabor and me if you find any.

PR:             100555
Submitted by:   gabor
Sponsored by:   Google Summer of Code 2006

- Chase plplot update

- Bump PORTREVISION and change lib version because math/gsl are updated. - portlint(1)

Make it build with 5.8.8.

PR:		93938
Submitted by:	Joerg Pulz <Joerg.Pulz@frm2.tum.de>
Approved by:	portmgr (kris/semi-implicit)

fixup make logic so that the distfile only gets here once and don't get dupplicated in the distinfo file by the makesum target.

Take a perl@ hat and add SHA256 checksums

Fix some portlint warnings.

Update to 2.4.2;  assign maintainership to perl@.

Let the IGNORE message make a bit more sense and change it from:

===>  p5-Some-Module-0.7 Port requires perl 5.6.x or later. Install
lang/perl5 then try again.

to:

===>  p5-Some-Module-0.7 requires perl 5.6.x or later. Install
lang/perl5 then try again.

Approved by:    silence on -ports

Bump PORTREVISION after the libgsl update.

Obtained from:	thierry

Chase the libgsl update.

At Kris's request, back out the MACHINE_ARCH spelling correction until after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Fix PLIST

Reported by:	kris via pointyhat

Chase plplot shared library version.

PR:		ports/71163
Submitted by:	Joerg Pulz <Joerg dot Pulz at frm2 dot tum dot de>

Chase libgsl-update

Tidy up whitespace.

Fix build on amd64 (compile shared libraries with -fPIC)

make it fetchable again

BROKEN: Distfile is unfetchable

add missing dependency

revive PDL and upgrade it to 2.4.1

As announced on 27 March 2003 in <20030328052350.GA18971@rot13.obsecurity.org>, remove these ports that have been broken for >4 months (in many cases much longer) with no sign of a fix.

After repo copy from graphics category to newly create multimedia one, update all appropriate references (*_DEPENDS, comments, etc):

ports/graphics/libfame		-->	ports/multimedia/libfame
ports/graphics/libquicktime	-->	ports/multimedia/libquicktime
ports/graphics/mpeg		-->	ports/multimedia/mpeg
ports/graphics/mpeg_encode	-->	ports/multimedia/mpeg_encode
ports/graphics/mpeg_play	-->	ports/multimedia/mpeg_play
ports/graphics/mtv		-->	ports/multimedia/mtv
ports/graphics/smpeg		-->	ports/multimedia/smpeg
ports/graphics/totem		-->	ports/multimedia/totem
ports/graphics/transcode	-->	ports/multimedia/transcode
ports/graphics/xanim		-->	ports/multimedia/xanim
ports/graphics/xmps		-->	ports/multimedia/xmps

Repo copied by:		cvs (joe)
Approved by:		portmgr (self & no objections)

This port requires perl > 5.6

PR:		43728
Submitted by:	Jamie Aczel <temperanza@softhome.net>

De-pkg-comment.

Bump gsl shlib version.

Pointed out by:	kris
Forgotten by:	obraun

o Rollback PORTCOMMENT modifications while this feature's implementation   is better studied o Turn PORTCOMMENT variable in Makefile back into pkg-comment files

Approved by:	kris (portmgr hat),
		portmgr, re (silence)

Use PORTCOMMENT in the Makefile, and whack the pkg-comment.

Approved by:	pat

BROKEN: Does not compile

bump gsl lib version

Submitted by:	La Temperanza <temperanza@softhome.net>

fix build problem by upgrading it to 2.3.4

Approved by:	will

Give up PDL maintainership.

Updated MAINTAINER to my new committer email address. Do the same for pkg-descr files.

Approved by:	markm

typo clean up police: \s -> \t

Fix pkg-plist breakage on systems with perl < 5.6.0.

Submitted by:	bento

Upgrade the math/PDL port to the latest version 2.1.1.  Correctly identify a couple of LIB_DEPENDS as such, and add a KITCHEN_SINK dependency on the GSL math libraries.

PR:		19517
Submitted by:	Brian Handy <handy@physics.montana.edu>

(1) Add new variable, XFREE86_VERSION, to specify which version of     XFree86 (3 or 4) to depend to when USE_XLIB is set.     XFREE86_VERSION defaults to 3 for now, but adventurous users can     override it in /etc/make.conf.  When XFREE86_VERSION=3, USE_XLIB     will add a dependency to x11/XFree86; when it is set to 4, the     dependency will be to x11/XFree86-4-libraries.  When     XFREE86_VER

Since XFree86 version 4 includes some software that used to be
    separate ports, when XFREE86_VERSION=3 the following variables are
    provided:

    USE_DGS		LIB_DEPENDS on x11/dgs
    USE_FREETYPE	LIB_DEPENDS on print/freetype
    USE_MESA		LIB_DEPENDS on graphics/Mesa3
    USE_XPM		LIB_DEPENDS on graphics/xpm

    When XFREE86_VERSION=4, these variables have no effect.  The
    LIB_DEPENDS in the tree for the above four ports have all been
    converted to the USE_* counterparts.  For your information, this
    is the count of the number of ports:

    USE_DGS		0
    USE_FREETYPE	16
    USE_MESA		36
    USE_XPM		236

    There is a new variable, XAWVER, which is set to 6 when
    XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4.  This is also
    passed to PLIST_SUB so ports that build Xaw based shared libraries
    can use this variable to substitute the shlib version number.

    There is also a provision of using a separate mtree file for
    XFREE86_VERSION=4, but that part is not enabled yet.

Reviewed by:	the ports list
Tested by:	make index (XFREE86_VERSION=3 only)

(2) Add hebrew to list of valid categories.
Submitted by:	nbm

Update to version 2.004.

PR:		17804
Submitted by:	Brian Handy <handy@physics.montana.edu>

Convert to PORTNAME/PORTVERSION.

PREFIX -> LOCALBASE

Changed LIB_DEPENDS: MesaGL.14->GL.14 due to Mesa-3.1 upgrade

Id->FreeBSD.

Make this at least build on the Alpha and mark it broken since it fails a few tests.

ADD WWW: