math/py-pywavelets1.10.0

math/py-pywavelets: Update to 1.10.0

Release notes: https://github.com/PyWavelets/pywt/releases/tag/v1.10.0

*/*: bump PORTREVISION after switching to NumPy 2.x

*/*: Switch to NumPy 2.x

PR:		294328
Exp-run:	antoine

math/py-pywavelets: Fix build with non-default Python version

python.mk: retire ${PYNUMPY}

With both math/py-numpy (2) and math/py-numpy1, the variable stopped
making sense. Also remove the upper version bound.

math/py-numpy: switch all consumers to math/py-numpy1

...and bump PORTREVISIONs of consumers with hard RUN_DEPENDS

PR: 281470

math/py-pywavelets: Update to 1.9.0

Mk/Uses/python.mk: Remove USE_PYTHON=cython3{,_run,_test}

- Convert all cython3 occurrence to USE_PYTHON=cython*
- Bump PORTREVISION dependent ports of USE_PYTHON=cython_run for dependency change

PR:		291778

*: Revise USES=python:... version range constraints

and strip all lower bounds of 3.9 or 3.10 because they are implied now.

python:3.9-X  -> python:-X
python:3.9+   -> python
python:3.10-X -> python:-X
python:3.10+  -> python
(options such as ,build preserved)

Mk/Uses/python.mk: Introduce USE_PYTHON=cython3{,_run,_test}

- Update USE_PYTHON=cython{,_run,_test}
- Convert all cython3 occurrence to USE_PYTHON=cython3*
- While I'm here, fix incorrect usage of combining cython3 in BUILD_DEPENDS and USE_PYTHON=cython

It is added to simplify the future transition from Cython 0.29 to 3.

The minimal version is set to 3.0.12 because it is required by devel/py-propcache.
The upper bound of version is set to 3.1 because it is limited by multiple ports.

math/py-pywavelets: update to 1.8.0

Release notes: https://pywavelets.readthedocs.io/en/latest/release.1.8.0.html

math/py-pywavelets: update to 1.7.0

Update to 1.7.0. The minimum supported Python version is 3.10

math/py-pywavelets: update to 1.6.0

math/py-PyWavelets: rename to pywavelets and update to 1.5.0

Update to 1.5.0. The package has been renamed to pywavelets starting with 1.5.0

math/py-PyWavelets: switch to pep517 and to PyPI

Switch to pep517 and to PyPI.

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

math/py-PyWavelets: Update to 1.4.1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

math/py-PyWavelets: Update to 1.3.0

math/py-PyWavelets: update to 1.2.0

math/py-PyWavelets: Remove invalid CPE information

Approved by:	portmgr (blanket)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

math/py-PyWavelets: - Update to 1.1.1. This release supports Python 3.7 and greater - Drop needless dependency - Take maintainership

PR:		249565
Approved by:	Eric Camachat (former maintainer)

Convert the tree to use PY_PILLOW

With hat:	portmgr
Originally submitted by:	kai

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version
  requirements of Pillow for www/py-wagtail.

Release Notes:

* https://pillow.readthedocs.io/en/latest/releasenotes/index.html

Backward Incompatible Changes (7.0.0):

* https://pillow.readthedocs.io/en/latest/releasenotes/7.0.0.html#backwards-incompatible-changes

Detailed Changelog:

* https://github.com/python-pillow/Pillow/blob/7.0.0/CHANGES.rst

PR:		243665
Submitted by:	sunpoet (patch for 7.0.0 and repo-copied version)
Reviewed by:	koobs [1], sunpoet
Approved by:	koobs (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23713

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

math/py-PyWavelets: - Don't restrict the port for Python 2.x only

PR:		226798
Approved by:	Eric Camachat (maintainer)

Bump PORTREVISIONs of all users of math/mpc that we just updated to version 1.1.0 (via revision 464079).

Convert Python ports to FLAVORS.

Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

- Update to 0.5.2

PR:		218565
Submitted by:	eric@camachat.org(maintainer)

Regular USE_GITHUB cleanup.

Do not set DISTNAME.
Do not set WRKSRC, if you feel like you need to, you should fix
GH_PROJECT instead.

Sponsored by:	Absolight

PyWavelets is a free Open Source library for wavelet transforms in Python. Wavelets are mathematical basis functions that are localized in both time and frequency. Wavelet transforms are time-frequency transforms employing wavelets. They are similar to Fourier transforms, the difference being that Fourier transforms are localized only in frequency instead of in time and frequency.

WWW: https://github.com/PyWavelets/pywt

PR:		217426
Submitted by:	eric@camachat.org