misc/kde-thumbnailer-chm0.2.1_5

misc/kde-thumbnailer-chm: Schedule for removal

Depends on deprecated Qt5, superseded by KDE Frameworks 6

audio/opus: bump consumers after update to 1.4

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

misc/kde-thumbnailer-chm: pet stage-qa

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Fix Qt5 symbol version scripts to put the catch-all clause first.  When a symbol matches multiple clauses the last one takes precedence.  If the catch-all is last it captures everything.  In the case of Qt5 libraries this caused all symbols to have a Qt_5 label while some should have Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1] https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2] https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3] https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

USES=compiler:c++11-lang is necessary to build on GCC-based architectures.

PR:		234379
Submitted by:	Piotr Kubaj
Approved by:	portmgr (tier-2 blanket)

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

misc/kde-thumbnailer-chm: - Update to 0.2.1 for Plasma Desktop

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	→https://reviews.freebsd.org/D15540

Rename KDE4 meta ports

This is done for
 * consistency,
 * and to simplify the import of the newer KDE Plasma5 desktop and KDE applications

Bumps the dependencies.

Reviewed by:	adridg
Differential Revision:	https://reviews.freebsd.org/D12979

Chase ffmpeg 3.3 update (ABI changes)

PR:		218658
Submitted by:	riggs

Reassign makc's ports back to the pool.

See "Maintainer Reset" in
https://www.freebsd.org/portmgr/policies_contributors.html. makc's last commit
was in March 31st (r412218), and his ports have been timing out since at least
July (r418155).

I also emailed him 2 weeks ago and have received no response so far.

Replace Mk/bsd.kde4.mk by Mk/Uses/kde.mk in preparation for KDE Frameworks and Plasma5 ports

At the moment KDE ports use bsd.kde4.mk to handle their dependencies. When
working on the ports for KDE Frameworks and Plasma5 it seemed to be more
reasonable to create a new kde.mk instead of adding an bsd.kde5.mk.

The kde.mk in this review is a stripped down version of the one we are using in
the KDE Test repositories plasma5 branch [1] to only contain the parts relevant
to the current KDE4 ports in the portstree [2].

Changes to the KDE Ports needed by this:

Replace USE_KDE4 by USE_KDE [3]
Add USES=kde:4 [4]
[1] http://src.mouf.net/area51/view/branches/plasma5/KDE/Mk/Uses/kde.mk
[2] The version in the plasma5 branch also handles frameworks/plasma5 and
    handles MASTER_SITES via a KDE_DIST variable similar to bsd.qt.mk for Qt
    Ports -- I chose to leave this out for now, as the diff is already large
    enough.
[3] I chose USE_KDE instead of USE_KDE4, USE_KDE5, USE_KDEX as the version we
    want is already specified as argument to kde:<arg>
[4] For KDE Frameworks and Plasma5 ports this would be kde:5

PR:             210667
Approved by:    portmgr, mat (mentor), rakuco (mentor)
Reviewed by:    mat, rakuco
Differential Revision:   https://reviews.freebsd.org/D6961

Remove expired misc/kdehier4 and update all of its consumers to not reference it any longer. This is a no-op because KDE4_PREFIX is equal to LOCALBASE

Fix up properties for misc/kde4-l10n/files/bsd.l10n.mk to make svn happy.

PR:		209014 (partial)
Submitted by:	myself
Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D6542

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Update the default version of GCC in the Ports Collection from GCC 4.7.4 to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Upgrade OpenEXR and ilmbase to 2.2.0.

GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)

Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130

Couple OpenEXR more tightly to ilmbase and require its exact .so
version.

Add UPDATING note, and bump PORTREVISION of all dependent ports.

Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.

Approved by:	portmgr (implicit for bumping PORTREVISION on unstaged ports)

- Bump PORTREVISION after KDE4_PREFIX change

- Support staging - Use new LIB_DEPENDS syntax - Use options helpers - Convert to USES - Minor changes/fixes

Add NO_STAGE all over the place in preparation for the staging support (cat: misc)

- convert USE_CMAKE to USES - while here clean up some ports from CMAKE_VERBOSE, which is intended   for users

Approved by:	portmgr (miwi)

Update to 0.2

Feature safe:	yes

KDE thumbnail generator for the CHM file format.

WWW: http://kde-apps.org/content/show.php?content=153410