multimedia/qt5-multimedia5.15.19p2

Qt5: Update to 5.15.19

This is the final release of Qt5. If your port still uses Qt5 and could
possibly use Qt6 instead, now would be a good time to make the switch.

PySide2: Update to 5.15.19

Announcement:
https://lists.qt-project.org/pipermail/announce/2026-May/000626.html
Release notes:
https://code.qt.io/cgit/qt/qtreleasenotes.git/tree/qt/5.15.19/release-note.md

Qt5: Update to 5.15.18

This is the penultimate release of Qt5. While Qt5 is EOL, due to the
LGPL releases being a year behind the commercial releases, there will
still be one more patch release in May 2026.

PySide2: Update to 5.15.18

Announcement:
https://lists.qt-project.org/pipermail/announce/2025-October/000592.html
Release notes:
https://code.qt.io/cgit/qt/qtreleasenotes.git/tree/qt/5.15.18/release-note.md

MFH:		2025Q4

Qt5: Update to 5.15.17 (getting down to the end)

Upstream standard support for Qt5 is officially over. [1] In short,
that means get your ports off of Qt5 ASAP, especially end-user
applications. FreeBSD deprecation of Qt5 is coming soon! It will likely
be a year of lead time, but please help in the meantime and remove qt5
flavors and child ports whenever possible.

www/qt5-webengine has been updated to 5.15.19 with security patches up to
Chromium 135.0.7049.95. It's unclear at this point if further security
patches will be publically available. The Qt5 WebEngine component,
however, is and forever will be based on Chromium 87.0.4280.144, which
is over 4 years old. Props to upstream for their backports over all
these years and making them publically available (probably more to do
with licensing constraints than anything, but hey).

We otherwise depend on KDE as our direct upstream to roll our distfiles,
which we have been hosting locally for over 3 years. Since Qt upstream
drops the LGPL releases of Qt 5.15.x a year later, there's no guarantee
KDE will rebase their patchset over the next year for the remaining two
.18 and .19 releases. This might be the last update for Qt5 on FreeBSD.

[1] https://www.qt.io/blog/qt-5.15-extended-support-for-subscription-license-holders

Qt 5 distribution ports: Add USE_LDCONFIG where appropriate

Pull Request:	https://github.com/freebsd/freebsd-ports/pull/358

*: Bump PORTREVISIONs of Pulseaudio consumers

Sponsored by:	Future Crew, LLC

Qt5: Update to 5.15.16

Update devel/pyside2* and devel/shiboken2 to 5.15.16

Update www/qt5-webengine to include the latest security fixes in
the chromium submodule [1]

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.16/release-note.md

MFH:		2024Q4
Security:	16e472d5-a8aa-11ef-b680-4ccc6adda413 [1]

multimedia/qt*-multimedia: enable sound out of box

Install audio/alsa-plugins when Qt multimedia is built
with ALSA support (default for Qt 5).

PR:		276276
Reported by:	Greg Balfour

Qt5: Update to 5.15.15

Update devel/pyside2* and devel/shiboken2 to 5.15.15

Update www/qt5-webengine to include the latest security fixes in
the chromium submodule

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.15/release-note.md

MFH:		2024Q3
Security:	66907dab-6bb2-11ef-b813-4ccc6adda413

Qt5: Update to 5.15.14

Update devel/pyside2* and devel/shiboken to 5.15.14

Update devel/qt5-script* and www/qt5-webengine to 5.15.17

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.14/release-note.md

Qt5: Update to 5.15.13

Update devel/pyside2* and devel/shiboken to 5.15.13

Update www/qt5-webengine to latest commit. Python 3.x support has been
integrated upstream, so local patches have been removed.

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.13/release-note.md

Qt5: Update to 5.15.12

Update devel/pyside2* and devel/shiboken2 to 5.15.12

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.12/release-note.md

Qt5: Update to 5.15.11

Update devel/pyside2* and devel/shiboken2 to 5.15.11

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.11/release-note.md

Qt5: Update to 5.15.10

Update devel/qt5-script* and www/qt5-webengine to 5.15.15-lts
Update devel/pyside2* and devel/shiboken2 to 5.15.10

Release note: https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.10/release-note.md

PR:		273934
Exp-run by:	antoine

audio/pulseaudio: Update to 16.1

Bump PORTREVISION on consumers.

Sponsored by:	Serenity Cybersecurity, LLC

PR:		262713

multimedia/qt5-multimedia-declarative: unbreak after 020693c166d1

Project MESSAGE: perl -w /usr/local/lib/qt5/bin/syncqt.pl -module QtMultimedia -version 5.15.8 -outdir /wrkdirs/usr/ports/multimedia/qt5-multimedia/work/kde-qtmultimedia-5.15.8p1 -builddir /wrkdirs/usr/ports/multimedia/qt5-multimedia/work/kde-qtmultimedia-5.15.8p1 /wrkdirs/usr/ports/multimedia/qt5-multimedia/work/kde-qtmultimedia-5.15.8p1
sh: perl: not found

PR:		266007

Qt: Update Qt 5 to 5.15.8

- update distfiles to be rebased on the Qt 5.15.8 branch

PR:		268773
Exp-run by:	antoine

Qt5: Update Qt 5 to 5.15.7

* rebase the KDE patched Qt5 ontop of the 5.15.7 branch
* update qt5-script to 5.15.11

Exp-run by:	antoine
PR:		268533

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

qt5: Update Qt to 5.15.5 (KDE patched)

- update patch-collection diff to be at the highest patch-level
- update patch-collection diff to be against 5.15.5 instead of 5.15.2
- update devel/qt5-script to 5.15.10
- libressl support by Felix Palmen <felix@palmen-it.de>

PR:			264944
Exp-run by:		antoine
Differential Revision:	https://reviews.freebsd.org/D35619

framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk

- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree

Differential Revision: https://reviews.freebsd.org/D35097

Qt: Switch Qt5 to use KDE's Qt patch collection

From [1]
    What's this?

	This is a set of git repositories based on the last public
	commits available for Qt 5.15 branches with a curated collection
	of patches on top to ensure open source products can be used
	comfortably until users transition to their Qt 6-based ports.

    Which patches does it include?

	This collection of patches includes patches that fix at least
	one of the following:

	    * Security issues
	    * Crashes
	    * Functional defects

	We only include patches that have been approved upstream in the
	Qt project. If a patch cannot be merged upstream for technical
	reasons (e.g. the class no longer exists), it can also be
	merged.

	The patches to merge will be decided based on their relevance
	towards Open Source products and their viability.

PR:		260548
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D33446

[1] https://community.kde.org/Qt5PatchCollection

multimedia/qt5-multimedia: avoid gstreamer-gl

While qt5-multimedia **works** with gstreamer-gl, it's unexpected,
and not listed as a dependency. Sabotage the detection of gstreamer-gl
by breaking the include path it looks for.

We might consider adding gstreamer-gl to the dependencies, to
get better overall GL support, but that's a more involved change.

PR:		245909
Reported by:	Martin Birgmeier

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

multimedia/qt5-multimedia: allow for neither ALSA nor PULSE to be selected

- this was a bad conversion from "allow at most one" to "allow any".

PR:		250920
Reported by:	p5B2E9A8F@t-online.de, VVD

Only define USE_LDCONFIG in devel/qt5-core

All the qt5-ports share the same library directory. devel/qt5-core is dependet on
by all others.
So there is no need to add identical entries to libdata/ldconfig, and restart the
ldconfig service on every pkg change of those ports.

Reported by:	bapt
Reviewed by:	bapt
Differential Revision:	https://reviews.freebsd.org/D27224

multimedia/qt5-multimedia: allow PULSE and ALSA options to coexist

In r451940 this was made exclusive, to follow the internal build system
of Qt. However, nowadays, the two backends are coinstallable again.

PR:		249406
Submitted by:	yuri

Update Qt5 to 5.15

This is a major upgrade of the Qt libraries [1], [2].

* People that use upgrading mechanisms with incomplete dependency handling
  (portmaster & Co) should make sure to manually remove the existing Qt
  packages to guarantee a safe upgrade. Keep in mind, that Qt does not like if
  you have an incomplete upgrade.

* This version of Qt drops support for OpenSSL 1.0 -- this means that there
  won't be any binary packages for Qt5 provided by the FreeBSD package builders
  for FreeBSD 11.x anymore -- and the same for *all* the ports depending on
  net/qt5-network [3]. If you cannot upgrade to a more recent FreeBSD
  version (12.x, 13.x), you will need to build Qt5 from ports while switching
  to an SSL implementation from ports.

Big thanks are due for
* kai@ for updating webengine (also mikael@)
* Felix Palmen for providing LibreSSL support patches
* adridg@ and lbartoletti@ for helping me fix the fallout

[1] https://www.qt.io/blog/qt-5.15-released
[2] https://wiki.qt.io/New_Features_in_Qt_5.15
[3] https://www.freshports.org/net/qt5-network

PR:		247010
Exp-run by:	antoine

multimedia/qt5-multimedia: fix GSTREAMER=off plist

PR:		245609
Reported by:	 rozhuk.im@gmail.com

Update Qt5 to 5.14.2

Very big thanks go again to kai@ who provided the www/qt5-webengine upgrade (to 5.14.0).
Notably, video capture support was re-enabled.

Announcement:
        https://www.qt.io/blog/qt-5.14-has-released

PR:		244964
Exp-run by:	antoine

Fix OPENAL knob in multimedia/qt5-multimedia

The knob was already there, but didn't have any machinery attached.

 - Move USES=openal to the knob
 - Introduce a patch to actually make openal configurable
   (instead of only following autodetect, so you can still
   turn the knob off with OpenAL installed)
 - Tidy the port a little
 - Add OPENAL to default options.

Previously, setting or unsetting OPENAL had no effect, and OpenAL
was always a dependency and used. Now, it does have an effect.
I've made it default so that the default options still match
what the port previously did (that is, depend on OpenAL).
Bump PORTREVISION because of that.

(Based very loosely on a patch submitted by Piotr Smyrak)

PR:		242595
Reported by:	Piotr Smyrak

multimedia/qt5-multimedia: mask Gstreamer related cmake files in plist

PR:		241812
Reported by:	rozhuk.im@gmail.com

Update Qt5 to 5.13.2

Announcement:
        https://www.qt.io/blog/qt-5.13.2-released

Thanks to kai@ for updating webengine.

PR:		241649
Exp-run by:	antoine

Add USES=xorg USES=gl, ports categories m

Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Qt5 update to 5.13.0

For new features, check: https://wiki.qt.io/New_Features_in_Qt_5.13

Thanks to adridg who helped to fix a lot of packages.

Exp-run by:	antoine
PR:		238782

Bump PORTREVISION for ports depending on the canonical version of GCC as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3 to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Update Qt5 to 5.12.1

Release announcement:
  https://blog.qt.io/blog/2019/02/01/qt-5-12-1-released/
Changelog:
  https://wiki.qt.io/Qt_5.12.1_Change_Files

- A change was required to qt-dist.mk to always pass LOCALBASE to qmake,
  as Qt5 has been installed to a prefix for some time now, there should
  not be any harm in that, with respect to it picking up installed versions
  of itself during build.

PR:		235622
Exp-run by:	antoine

Fix Qt5 symbol version scripts to put the catch-all clause first.  When a symbol matches multiple clauses the last one takes precedence.  If the catch-all is last it captures everything.  In the case of Qt5 libraries this caused all symbols to have a Qt_5 label while some should have Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1] https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2] https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3] https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

Update Qt5 to 5.12.0

http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/

- This breaks support for libressl again. Patches are welcome.

PR:		233705
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative

- There was no obvious reason to split these ports, and it makes
  porting simpler; the set of ports using either mostly coincided.

Exp-run by:	antoine
PR:		223687
PR:		232751

qt5: Fix build on GCC based architectures.

PR:		231584
PR:		231677
PR:		231685
PR:		231830
PR:		231955
PR:		231905
PR:		231892
PR:		231684
PR:		231958
PR:		231960
PR:		231818
PR:		231542
PR:		231860
PR:		231681
PR:		231963
PR:		231891
PR:		231966
PR:		231904
PR:		231676
PR:		231819
PR:		231956
PR:		231680
PR:		231957
PR:		231903
PR:		231901
PR:		231667
PR:		231861
Submitted by:	 Piotr Kubaj <pkubaj@anongoth.pl>

Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l

Update Qt5 to 5.11.1

Big thanks to
        * brnrd for the libressl patches in net/qt5-network
        * jhale for fixing the bulk load of ports

PR:		230884
Exp-run by:	antoine

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	→https://reviews.freebsd.org/D15540

Update the Qt5 ports to 5.10.1.

The work was done by tcberner and myself, with thanks to antoine for the
exp-run.

Not a lot to report compared to other Qt5 updates:
* net/qt5-network is still broken with LibreSSL. I said this in a commit
  message ages ago but it bears repeating: upstream is open to adding support
  for LibreSSL, but someone needs to step up to maintain it upstream, otherwise
  things will continue to be broken all the time.
* www/qt5-webengine is a huge monster that is terrible to update, just like
  www/chromium itself is. We (kde@) have decided to keep using the 5.9 series
  for the time being, as it should be compatible with the rest of Qt anyway. It
  was updated to 5.9.5, the latest 5.9 release at the time of writing.

PR:		228213

Fix permissions in installed Qt5 header files

For the qt5-* ports bsd.qt.mk sets EXTRACT_AFTER_ARGS, and
thereby does not get the normal default value of
      --no-same-owner --no-same-permissions
passed when extracting. This lead to for example header files
being installed (i.e. copied), with permissions group write
permissions.

Manually append that to the bsd.qt.mk shenanigans (also do the
same in www/qt5-webchannel, which opts out of the bsd.qt.mk value)

PR:		227027
Reported by:	grarpamp@gmail.com

Allow ALSA aliases in the Qt5 sound devices list.

Patch by Stephen Hurd, seems to be ignored upstream. The new patch describes
what it does and why it is needed.

PR:		208570
Submitted by:	Stephen Hurd
Reported by:	Stephen Hurd
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D13992

Start setting QT_DEFINES again.

The machinery in bsd.qt.mk's qt-post-install target does not seem to account
for the case of a module no longer defining QT_DEFINES: the lines in
qconfig-modules.h including said module's qconfig-<module>.h will remain.

We did that to qt5-multimedia in r458338, and it results in build errors if
qt5-multimedia had been previously installed. Set QT_DEFINES again to a dummy
value until we figure out a proper solution.

PR:		225100