net-im/libnice0.1.23

net-im/libnice*: update to 0.1.23

Update to 0.1.23

libnice 0.1.23 (2025-11-26)
===========================
API: Added option NICE_AGENT_OPTION_CLOSE_FORCED to not wait for TURN when
  closing asynchronous
Reject invalid remote candidates with priority=0
Add missing mutex in tcp-bsd socket
Add buffer list support to nicesrc
Avoid dropping packing in nicesink, retry instead
Only create a new NiceCandidate if a socket can be opened, as it is
 a somewhat costly operation.
Many new tests
Fix leaks
Fix various test flakiness

Adjust dependencies.

Remove pkg-plist in slave port.
    Does not work, setting PLIST_FILES does not empty the MASTERDIR
    plist. (truckman)

BUILD_WRKSRC and INSTALL_WRKSRC do not work with meson. (truckman)

When building with ssl, gnutls is not needed. (truckman)

These two ports should probably use SUBPACKAGES.

PR:		291467

net-im/libnice[-gst1]: update to 0.1.22 release (+)

Changelog:
* API: Make nice_address_is_local() available to applications
* Make padding be all zeros to conform to RFC8489
* Fix interface listing on Android
* Include TURN sockets in the list from nice_agent_get_sockets()
* Set consent refresh timeout in line with RFC 7675
* Fix ifr_ifindex build with cland and OpenBSD

net-im/libnice: Remove libtool as dependency

Not used in project

Approved by:	portmgr (blanket)

net-im/libnice: unbreak with GUPNP enabled (+)

net/gupnp-igd12 rest in peace, move to net/gupnp-igd

Reported by:	poudriere failure

net-im/libnice: Change LIB_DEPENDS from gupnp-igd to gupnp-igd12

- Bump PORTREVISION for dependency change

net-im/libnice{-gst1,}: Update to 0.1.21

Sponsored by:	Serenity Cybersecurity, LLC

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

net-im: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alberto Villa <avilla@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Timoshenko <gonzo@univ.kiev.ua>
  *  Andrew Lewis <freeghb@gmail.com>
  *  Andrey Akhmichin <sepulkarium45@yahoo.com>
  *  Bartek Rutkowski <r@robakdesign.com>
  *  Bernard Spil <brnrd@freebsd.org>
  *  Brendan Molloy <brendan+freebsd@bbqsrc.net>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eugene Grosbein <eugen@FreeBSD.org>
  *  Florent Thoumie <flz@FreeBSD.org>
  *  Frank Altpeter <frank@altpeter.de>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geoffrey Mainland <mainland@apeiron.net>
  *  Henry Hu <henry.hu.sh@gmail.com>
  *  Jim Mock <jim@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  John Prather
  *  Jonathan Chen <jonc@chen.org.nz>
  *  Joseph S. Atkinson <jsatkinson@embarqmail.com>
  *  Junji NAKANISHI <jun-g@daemonfreaks.com>
  *  Kelly Cochran <kcochran@trolans.net>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Kris Moore <kmoore@freebsd.org>
  *  Lars Eggert <lars.eggert@gmx.net>
  *  Marc Bruenink
  *  Matthew West <mwest@uct.ac.za>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Max E. Kuznecov <mek@mek.uz.ua>
  *  Meethune Bhowmick <meethune@gmail.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Nicola Stanislao Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nikolay Pavlov <qpadla@gmail.com>
  *  Oleg Ginzburg (olevole@olevole.ru)
  *  Pavel Andreev
  *  Saulius Menkevicius <bob@nulis.lt>
  *  SeaD
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Steve Wills <swills@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Wen Heping <wen@FreeBSD.org>
  *  Yen-Ming Lee <leeym@cae.ce.ntu.edu.tw>
  *  Yuri <yuri@tsoft.com>
  *  Yuri Victorovich
  *  Yuri Victorovich <yuri@rawbw.com>
  *  dd
  *  gahr
  *  gnome@freebsd.org
  *  jodocus <jodocus@jodocus.org>
  *  mph
  *  trasz
  *  vsevolod

With hat:	portmgr

net-im/libnice*: update to 0.1.19

While here remove gtk_doc to be consistent with most of the other
gnome ports

framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk

- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree

Differential Revision: https://reviews.freebsd.org/D35097

net-im/libnice-gst1: drop unused Meson options after 3367f62c42b8

meson.build:1:0: ERROR: Unknown options: "gst_version"

PR:		259080
Reported by:	antoine (via exp-run)
Regressed by:	https://github.com/mesonbuild/meson/commit/dbf2ace6ca1c

net-im/libnice-gst1: Fix dependencies and make sure QA passes

LIB_DEPENDS is overwritten later in the master port, so libnice is
never added as a dependency.  Setting MAINTAINER is redundant since
it is overwritten later too.

While here amend the plist to exclude unwanted files.

Reported by:	portscan (overwritten variables)

devel/meson: update to 0.58.1

Changes:	https://mesonbuild.com/Release-notes-for-0-58-0.html
Reported by:	GitHub (watch releases)
PR:		255550
Exp-run by:	antoine
Approved by:	tcberner

Remove # $FreeBSD$ from Makefiles.

net-im/libnice update to 0.1.18

PR: 247547
Submitted by: swills
Approved by: maintainer timeout

Remove libnice-gst010 it is not depended on and support for gstreamer 0.10 has been dropped upstream

- Switch to USES=localbase - Update WWW

Approved by:	portmgr blanket

net-im: Add missing USES={gnome,xorg}

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Fixup some whitespace at the beginning of lines problems.

With hat:	portmgr
Sponsored by:	Absolight

- Remove empty lines after .include <bsd.port.mk>

Approved by:	portmgr blanket

Update libnice to 0.1.13.

Update libnice to 0.1.8.

Enable introspection support.

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2. Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have
ported a few that can't be installed via this way.
The old gnome-utils and gnome-games ports where split up into single ports
and where converted to meta-ports.
gnome-terminal requires a UTF-8 locale to run, gdm handles this already, but
if you use startx you need to do this yourself.

Upgrade instructions:

Delete the old and conflicting packages:
# pkg delete clutter gnome-utils gnome-panel gnome-keyring vala-vapigen \
    guile gcalctool gnome-media libgnomekbd
# pkg delete gnome-screensaver gnome-applets bug-buddy evolution-exchange \
    evolution-webcal gnome-system-tools seahorse-plugins gnome-control-center

For package users the following lines will be enough:
# pkg upgrade
# pkg install gnome3

For ports users should do the following:
# portmaster -a
# portmaster x11/gnome3

We are currently aware of two issues. The first issue is a bug in the
file monitoring code in the glib20 port. This bug causes glib programs
to crash when files in a monitored directory are added or removed.
Upstream is aware of the problem, but since the problem is quite complex
there is no solution yet. This problem isn't restricted to BSD.

The second issue is that on certain video cards totem will display a
purple/pink overlay on the video. It not clear yet where the issues
comes from.

Major thanks goes to Gustau Perez for being a driving force behind getting
GNOME 3 up to speed again. Also thanks to Antoine Brodin for running the exp-runs.

This update was also made possible by:
	Joe Maloney
	Kris Moore
	Beeblebrox
	Ryan Lortie
	Antoine Jacoutot
	and everyone I missed

Convert to USES=libtool and add INSTALL_TARGET=install-strip

Obtained from:	gnome-dev

- Stage support - Convert to USES

Add NO_STAGE all over the place in preparation for the staging support (cat: net-im)

- Convert USE_GETTEXT to USES (part 1)

Approved by:	portmgr (bapt)

Finish converting the whole ports tree to USES=pkgconfig

- Add a backup mirror freedesktop.org

Approved by:	kvm

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which   are the latest stable releases. * Update vala to the newest stable release 0.18.1, also update a few ports   in the gtk/gnome stack. * The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles. * Remove pkg-config run depends from glib20 and freetype2. This doesn't   eliminate pkg-config run dependency c

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS) - Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:		157936
Submitted by:	myself
Exp-runs by:	pav
Approved by:	pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since mid 2008.

PR:		ports/159624
Submitted by:	Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Get Rid MD5 support

Restore some of nork's commit so that additional files are touched after configure.  This is known to fix some issues on ZFS builds.

Reported by:	fluffy

Bump PORTREVISION again for those that may have built library version 9.

Try another approach to fixing the libtool issue.  This was tested on my amd64 -CURRENT machine, so it should work with others, too.

Make sure that all of the files are up-to-date to prevent auto* from running.

Sync to new bsd.autotools.mk

Bump PORTREVISION by previous commit. Because libnice invoked autotools installed libnice.pc to $PREFIX/lib/pkgconfig/ instead of $PREFIX/libdata/pkgconfig.

To not invoke autotools, so ${TOUCH} some autotools related files.

Update to 0.0.13.

Bump PORTREVISION and add USE_GETTEXT where missing.

PR:		147257

Update to 0.0.12.

Update to 0.0.11.

Update to 0.0.10.

Add another build fix for 6.X.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr

Update to 0.0.9.