net-im/sendxmpp 1.24_1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

net-im: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alberto Villa <avilla@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Timoshenko <gonzo@univ.kiev.ua>
  *  Andrew Lewis <freeghb@gmail.com>
  *  Andrey Akhmichin <sepulkarium45@yahoo.com>
  *  Bartek Rutkowski <r@robakdesign.com>
  *  Bernard Spil <brnrd@freebsd.org>
  *  Brendan Molloy <brendan+freebsd@bbqsrc.net>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eugene Grosbein <eugen@FreeBSD.org>
  *  Florent Thoumie <flz@FreeBSD.org>
  *  Frank Altpeter <frank@altpeter.de>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geoffrey Mainland <mainland@apeiron.net>
  *  Henry Hu <henry.hu.sh@gmail.com>
  *  Jim Mock <jim@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  John Prather
  *  Jonathan Chen <jonc@chen.org.nz>
  *  Joseph S. Atkinson <jsatkinson@embarqmail.com>
  *  Junji NAKANISHI <jun-g@daemonfreaks.com>
  *  Kelly Cochran <kcochran@trolans.net>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Kris Moore <kmoore@freebsd.org>
  *  Lars Eggert <lars.eggert@gmx.net>
  *  Marc Bruenink
  *  Matthew West <mwest@uct.ac.za>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Max E. Kuznecov <mek@mek.uz.ua>
  *  Meethune Bhowmick <meethune@gmail.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Nicola Stanislao Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nikolay Pavlov <qpadla@gmail.com>
  *  Oleg Ginzburg (olevole@olevole.ru)
  *  Pavel Andreev
  *  Saulius Menkevicius <bob@nulis.lt>
  *  SeaD
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Steve Wills <swills@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Wen Heping <wen@FreeBSD.org>
  *  Yen-Ming Lee <leeym@cae.ce.ntu.edu.tw>
  *  Yuri <yuri@tsoft.com>
  *  Yuri Victorovich
  *  Yuri Victorovich <yuri@rawbw.com>
  *  dd
  *  gahr
  *  gnome@freebsd.org
  *  jodocus <jodocus@jodocus.org>
  *  mph
  *  trasz
  *  vsevolod

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Fix spelling mistakes, typos, poor wording, hyphenation, jargonisms, contractions, "<portname> is ..." cases, missing Oxford commas, and other miscellaneous style bugs in the COMMENT line.

Convert to UCL & cleanup pkg-message (categories n)

(and missed 3 missed files from previous categories.)

Remove Perl core modules

- While I'm here, convert to options target helper
- Bump PORTREVISION for dependency change

With hat:	perl

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Add missing runtime dependencies - While here, cosmetic fix to pkg-message and silence mkdir

PR:		207784
Submitted by:	everytrash@gmail.com
Approved by:	maintainer timeout (mek@mek.uz.ua, 3 weeks)

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Update ports in the n* categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

- Update to version 1.24 - Port development has moved to new place - Add EXAMPLES option - Inform users of config format change in pkg-message

PR:		197248
Submitted by:	Tomas Hecker <tomas.hecker@gmail.com>
Approved by:	maintainer timeout

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

Replace some occurences of mach with PERL_ARCH (and a couple of other small noop fixes.)

With hat:	perl@
Sponsored by:	Absolight

- Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat: net-im)

- convert to the new perl5 framework - trim Makefile header

Approved by:	portmgr (bapt@, blanket)

- Get Rid MD5 support

- Fix dependendy

PR:		138884
Submitted by:	Vivek Khera <vivek@khera.org>
Approved by:	maintainer
Feature safe: yes

Remove always-false/true conditions based on OSVERSION 500000

sendxmpp is a program to send XMPP (Jabber) messages from the command-line. Messages can be sent both to individual recipients and chatrooms.

WWW: http://www.djcbsoftware.nl/code/sendxmpp/

PR:		ports/92254
Submitted by:	Max E. Kuznecov <mek@mek.uz.ua>