net-mgmt/ocsinventory-agent2.10.4_1,1

all: drop support for FreeBSD 13, mips and risc64sf

Reviewed by:            many (*)
Differential Revision:  https://reviews.freebsd.org/D55624
Differential Revision:  https://reviews.freebsd.org/D55642 (merged in from bofh)

many (*)
  acm arrowd brooks cmt dch decke dinoex eduardo fluffy fuz gahr garga
  jbeich joerg jrm kai kenrap martymac matthew mfechner michaelo mizhka
  nobutaka pkubaj se tagattie thj

  Anton Saietskii
  GenericRikka
  Gert Doering
  Jan Bramkamp
  Oleh Hushchenkov
  Oleksandr Kryvulia
  Ralf van der Enden
  Yamagi

  desktop kde python tcltk office

net-mgmt/ocsinventory-agent: Fix cpu detection

Fix typo, NBSOCKETS isn't defined

Reported by:		Carlos Fernando Assis Paniago
Tested by:		Carlos Fernando Assis Paniago

net-mgmt/ocsinventory-agent: Update to 2.10.4

While here, add missing dependencies [1]

Changes:
  https://github.com/OCSInventory-NG/UnixAgent/releases/tag/v2.10.4

PR:		282146 [1]

net-mgmt/ocsinventory-agent: Update to 2.10.2

Changes:
  https://github.com/OCSInventory-NG/UnixAgent/releases/tag/v2.10.2

net-mgmt/ocsinventory-agent: Update to 2.10.0

Changes:
  https://github.com/OCSInventory-NG/UnixAgent/releases/tag/v2.9.3
  https://github.com/OCSInventory-NG/UnixAgent/releases/tag/v2.10.0

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

net-mgmt/ocsinventory-agent: Update to 2.9.1

Changes:
  https://github.com/OCSInventory-NG/UnixAgent/releases/tag/v2.9.0
  https://github.com/OCSInventory-NG/UnixAgent/releases/tag/v2.9.1

net-mgmt/ocsinventory-agent: use dmidecode only where it's available

net-mgmt/ocsinventory-agent: Update to 2.8.1

Changes: https://github.com/OCSInventory-NG/UnixAgent/releases/tag/v2.8.1

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

net-mgmt/ocsinventory-agent: update to 2.8

- update to 2.8
 - take maintainership
 - pet portlint / portfmt

Convert to UCL & cleanup pkg-message (categories n)

(and missed 3 missed files from previous categories.)

regular USE_GITHUB cleanup.

net-mgmt/ocsinventory-agent:

PR:		231039
Submitted by:	geoffroy desvernay <dgeo@centrale-marseille.fr>

As a test, restrict the dependency on dmidecode to x86.

- Remove redundant definitions of IPV6_DESC and [OPEN]SSL_DESC when closely   matching standard ones from `Mk/bsd.options.desc.mk' - Rename couple of options to standard name or the one that better reflects   their usage

- Remove dependency on p5-Net-Ping: Net::Ping is bundled with perl

Approved by:	portmgr (bapt)

- Fix trailing whitespace in pkg-messages

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

- Fix RUN_DEPENDS: LWP::UserAgent (www/p5-libwww) is required - While I'm here:   - Update MASTER_SITES   - Fix and sort RUN_DEPENDS: Digest::MD5 is already in all supported Perl releases - Bump PORTREVISION for dependency change

PR:		200639
Submitted by:	Gennady Proskurin <gpr@mail.ru>

- Add LICENSE_FILE - Fix shebangs - Add NO_ARCH

MFH:		2015Q2 (blanket)

Catch up abusive uses of ${SITE_PERL}.

Sponsored by:	Absolight

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

net-mgmt/ocsinventory-agent: Upgrade version 2.0.5 => 2.1.1

PR:		192996
Submitted by:	Phillip Beaumont

- Stage support

Part 3 at removing now useless FETCH_ARGS redifition

- Return almost all of my ports back to the pool. I have no time to make any   necessary fixes on them for the past months.

Add NO_STAGE all over the place in preparation for the staging support (cat: net-mgmt)

- Resolve of using PERL_CONFIGURE and USE_PERL5 together - Convert to new perl5 framework

With hat:	perl@

- Update to 2.0.5.

PR:		ports/170481 [1], ports/17179 [2]
Submitted by:	Geoffroy Desvernay <dgeo@centrale-marseille.fr> [1],
		Sergey Zaykov <sergey_zaikov@rambler.ru> [2]

- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)

- Update to 2.0.4.

Feature safe:	yes

- Update to 2.0. - Sort PLIST.

PR:		ports/158311
Submitted by:	Sergey Zaykov <mail_of_sergey@mail.ru>

- Now is possible to built this port without user interaction. - Update PKG-PLIST. - Included a forgotten manpage. - Bump PORTREVISION.

PR:		ports/153689
Submitted by:	Tom Judge <tom@tomjudge.com>

- Update to 1.1.2.1.

Requested by:	John M. Crawford <crawford.6@sociology.osu.edu> (via email)

- Update to 1.1.2. - Add LICENSE.

Fix build and run dependencies: sysutils/dmidecode is only needed to build, and the rest are really run dependencies.

PR:		ports/146491
Submitted by:	Guido Falsi <mad@madpilot.net>
Approved by:	araujo@ (maintainer timeout)

- Switch SourceForge ports to the new File Release System: categories starting with N

- Update to 1.02. - Take maintainership.

PR:		ports/134210
Submitted by:	myself
Approved by:	maintainer timeout (more than 2 weeks)

- Mark IS_INTERACTIVE to avoid infinite loops and stop some damages on packages cluster. - Mark as UNBROKEN.

Submitted by:	pav via pointyhat

- Mark BROKEN. The port asks interactive questions in post-install. It needs to   be automated, or properly marked IS_INTERACTIVE

Reported by:	pointyhat

- Update to 0.0.9.2.

PR:		ports/123398
Reviewed by:	lippe
Approved by:	maintainer timeout (4 weeks)

- Update to 0.0.6.2.

PR:		ports/115855
Submitted by:	Dennis Cabooter <freebsd@rootxs.org> (maintainer)
Approved by:	itetcu (mentor)

Open Computer and Software Inventory Next Generation is an application designed to help a network or system administrator keep track of the computers configuration and software that are installed on the network

WWW: http://www.ocsinventory-ng.org/

PR:		ports/115520
Submitted by:	Dennis Cabooter