net-mgmt/torrus2.09_4

*/*: Bump consumers of databases/rrdtool

New version of rrdtool in tree

net-mgmt/torrus: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

net-mgmt: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  @BABOLO <.@babolo.ru>
  *  Alex Samorukov, samm@freebsd.org
  *  Alexander Kriventsov <avk@vl.ru>
  *  Alexander Sulfrian <alexander@sulfrian.net>
  *  Alexander Y. Grigoryev <alexander.4mail@gmail.com>
  *  Alexandre Biancalana <ale@biancalanas.net>
  *  Alexandre Snarskii <snar@paranoia.ru>
  *  Alexandre Snarskii <snar@snar.spb.ru>
  *  Alexey Bobkov <mr.deadlystorm@gmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey V. Degtyarev
  *  Anders Nordby <anders@FreeBSD.org>
  *  Anders Troback
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew 'derfi' Sidorov <derfi@vei.ru>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrew Thompson <andy@fud.org.nz>
  *  Andrew Thompson <thompsa@freebsd.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Athanasios Douitsis <aduitsis@cpan.org>
  *  Babak Farrokhi <farrokhi@FreeBSD.org>
  *  Bartlomiej Rutkowski <r@robakdesign.com>
  *  Bill Fenner <fenner@FreeBSD.org>
  *  Blaz Zupan <blaz@si.FreeBSD.org>
  *  BluePex Security Solutions <freebsd-ports@bluepex.com>
  *  Boris Samorodov <bsam@FreeBSDD.org>
  *  Brad Davis <brd@FreeBSD.org>
  *  Brad Hendrickse <bradh@uunet.co.za>
  *  Brian Somers <brian@FreeBSD.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Bruce Simpson
  *  Chris S.J. Peron <maneo@bsdpro.com>
  *  Chris St Denis <chris@smartt.com>
  *  Christer Edwards <christer.edwards@gmail.com>
  *  Christopher N. Harrell <cnh@ivmg.net>
  *  Clement Laforet <sheepkiller@cultdeadsheep.org>
  *  Corey Smith <corsmith@gmail.com>
  *  Craig Boston <craig@yekse.gank.org>
  *  Dave Cottlehuber <dch@FreeBSD.org>
  *  Dave Cottlehuber <dch@skunkwerks.at>
  *  David O'Brien (obrien@NUXI.com)
  *  David Shane Holden <dpejesh@yahoo.com>
  *  David Yeske <dyeske@gmail.com>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Dennis Herrmann <adox@mcx2.org>
  *  Dikshie <dikshie@sfc.wide.ad.jp>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Domas Mituzas <midom@dammit.lt>
  *  Douglas Fraser <doug@idmf.net>
  *  Douglas K. Rand <rand@iteris.com>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  El Vampiro <vampiro@rootshell.ru>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eric F Crist <ecrist@secure-computing.net>
  *  Eric Turgeon <ericturgeon.bsd@gmail.org>
  *  Eugene Grosbein <eugen@FreeBSD.org>
  *  Fotis Zabaras <fotis@zabaras.eu>
  *  Frank Wall <freebsd@moov.de>
  *  Frank Wall <fw@moov.de>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geoffroy Desvernay <dgeo@centrale-marseille.fr>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Gerrit Beine <gerrit.beine@gmx.de>
  *  Henrik Brix Andersen <henrik@brixandersen.dk>
  *  Holger Lamm <holger@eit.uni-kl.de>
  *  Hsin-Han You <hhyou@cs.nctu.edu.tw>
  *  Hung-Yi Chen <gaod@hychen.org>
  *  Inacio <nacho319+freebsdZilla@gmail.com>
  *  J.R. Oldroyd <fbsd@opal.com>
  *  JJ Behrens <jj@nttmcl.com>
  *  Jake Smith <jake@xz.cx>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  James Flemer <jflemer@acm.jhu.edu>
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Janos Mohacsi <mohacsi@niif.hu>
  *  Janos.Mohacsi@bsd.hu
  *  Janos.Mohacsi@dante.org.uk
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jeremy Chadwick <koitsu@FreeBSD.org>
  *  Jerry A! <jerry@thehutt.org>
  *  Jev Björsell <ports@ecadlabs.com>
  *  Joe Clarke <marcus@marcuscom.com
  *  Joe Clarke <marcus@marcuscom.com>
  *  Johannes Jost Meixner <johannes@FreeBSD.org>
  *  Johannes Jost Meixner <johannes@perceivon.net>
  *  Josh Carroll <josh.carroll@gmail.com>
  *  KIKUCHI Koichiro <koichiro@rworks.jp>
  *  Kevin Hung <khung@nullaxiom.com>
  *  Kian Mohageri <kian.mohageri@gmail.com>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Kirill Ponomarew <ponomarew@oberon.net>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Lars Engels <lars.engels@0x20.net>
  *  Lars Thegler <lars@thegler.dk>
  *  Lawrence Chen <beastie@tardisi.com>
  *  Lev Walkin <vlm@lionet.info>
  *  Luca Pizzamiglio <pizzamig@FreeBSD.org>
  *  Mahdi Mokhtari <mokhi63@gmail.com>
  *  Manuel Kreutz <mk@nomtec.net>
  *  Marcin Cieslak <saper@system.pl>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Martin Jackson <mhjacks@swbell.net>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Mathieu Simon <freebsd@simweb.ch>
  *  Matt Moriarity <matt@mattmoriarity.com>
  *  Matt Peterson <matt@peterson.org>
  *  Matthew Seaman <matthew@FreeBSD.org>
  *  Michael L. Hostbaek (mich@freebsdcluster.org)
  *  Michael Lyngbøl <lyngbol@wheel.dk>
  *  Michael Reifenberger <mr@FreeBSD.org>
  *  Michal Hanula <michal@hanu.la>
  *  Mike Bristow <mike@urgle.com>
  *  Mikhail T. <mi@aldan.algebra.com>
  *  Mikolaj Golub <to.my.trociny@gmail.com>
  *  Muhammad Moinur Rahman <5u623l20@gmail.com>
  *  Muhammad Moinur Rahman <bofh@FreeBSD.org>
  *  Nicholas Esborn <nick@netdot.net>
  *  Nick F <ffault@gmail.com>
  *  Nick Hilliard
  *  Nick Hilliard <nick@foobar.org>
  *  Pakhom Golynga <pg@pakhom.spb.ru>
  *  Paul Chvostek <paul@it.ca>
  *  Paul Dlug <paul@nerdlabs.com>
  *  Paul Dlug<paul@nerdlabs.com>
  *  Pavel I Volkov
  *  Peter C. Lai <cowbert@gmail.com>
  *  Phil Phillips
  *  Pierre David <pdagog@gmail.com>, Jean Benoit <jean@unistra.fr>
  *  Rihaz Jerrin <rihaz.jerrin@gmail.com>
  *  Roar Pettersen <roar@uib.no>
  *  Russell A. Jackson <rjackson@cserv62.csub.edu>
  *  Ryan Steinmetz
  *  Ryan Steinmetz <rpsfa@rit.edu>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Serge Maslov <serge@maslov.biz>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sevan Janiyan <venture37@geeklan.co.uk>
  *  Shaun Amott <shaun@inerd.com>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Lambrev <cheffo@freebsd-bg.org>
  *  Stephen J. Roznowski <sjr@home.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Tassilo Philipp <tphilipp@potion-studios.com>
  *  Thomas Spreng <spreng@socket.ch>
  *  Tim Bishop <tdb@FreeBSD.org>
  *  Timur I. Bakeyev <bat@cpan.org>
  *  Tom Judge <tj@FreeBSD.org>
  *  Tor Halvard "Squat" Furulund <squat@squat.no>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Tsung-Han Yeh <snowfly@yunteche.du.tw>
  *  Tuc <freebsd-ports@t-b-o-h.net>
  *  Vaida Bogdan
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vladimir Ermakov <samflanker@gmail.com>
  *  Vladimir Kotal <vlada@devnull.cz>
  *  Wei-chun Chao
  *  Xavier Beaudouin <kiwi@oav.net>
  *  Ying-Chieh Chen <yinjieh@csie.nctu.edu.tw>
  *  Yuan-Chung Hsiao <ychsiao@ychsiao.org>
  *  anarcat@anarcat.ath.cx
  *  arved
  *  babak@farrokhi.net
  *  brock@cotcomsol.com
  *  clement@FreeBSD.org
  *  cnh@ivmg.net
  *  dom@happygiraffe.net
  *  dpejesh@yahoo.com
  *  ecronin@gizmolabs.org
  *  ehaupt@FreeBSD.org
  *  gpalmer
  *  gslin <gslin@gslin.org>
  *  hr <holgerrepp@googlemail.com>
  *  ijliao
  *  itojun@itojun.org
  *  jabley
  *  jabley@clear.co.nz
  *  jamrich.majo@gmail.com
  *  janos.mohacsi@bsd.hu
  *  joris
  *  joseph@randomnetworks.com
  *  marck@rinet.ru
  *  mich@FreeBSD.org
  *  mich@freebsdcluster.org
  *  nbm
  *  rea-fbsd@codelabs.ru
  *  rflynn@acsalaska.net
  *  salexanov@gmail.com
  *  sanpei@FreeBSD.org
  *  steinex
  *  torstenb
  *  trevor
  *  vfom@narod.ru
  * # Created by Kevin Bowling <kbowling@FreeBSD.org>

With hat:	portmgr

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

net-mgmt: Add missing USES={gnome,php}

Convert to UCL & cleanup pkg-message (categories n)

(and missed 3 missed files from previous categories.)

net-mgmt/torrus: 2.07 -> 2.09

- Torrus/Renderer/RPC.pm (rpc_timeseries): TIMESERIES RPC
  call now returns title, labels, and vertical_label
- init.d/torrus.in: utilize the new launcher in init script
- bin/launcher.in: new utility for starting-stopping daemons
- bin/action_snmptrap.in: TORRUS_NPCOMMENT is deliverd in .10 in SNMP traps
- Torrus/DevDiscover/RFC2670_DOCS_IF.pm: new discovery
  parameter: RFC2670_DOCS_IF::disable-downstreams
- Torrus/Collector/SNMP_Params.pm: "aes128cfb" is invalid
  value for snmp-privprotocol, should be "aes"
- Torrus/Collector/SNMP.pm: DNS errors treated as host
  unreachable; reachability statistics more accurate
- Torrus/Renderer/RPC.pm (rpc_timeseries): added DATAONLY
  parameter for TIMESERIES RPC call
- Torrus/Renderer/RPC.pm: AGGREGATE_DS RPC call now works
  for leaves without MAX RRA
- Torrus/Renderer/RRDtool.pm (rrd_make_hrules): using
  skipscale for horizontal rules (requires rrdtool-1.4.8 or newer)
- Torrus/DevDiscover/F5BigIp.pm: added system performance
  statistics and 64-bit interface counters
- Torrus/DevDiscover/RFC2863_IF_MIB.pm:
  new discovery parameter: RFC2863_IF_MIB::disable-all
- Torrus/Renderer/RRDtool.pm: now hrules are drawn with
  semi-transparent LINE1
- xmlconfig/defaults.xml: two new horizontal rules: warn-level, crit-level
- xmlconfig/defaults.xml: moved monitor-period and
  monitor-timeoffset from snmp-defs.xml
- bin/monitor.in: new CLI option: --runalways
- configs/torrus-config.pl: new configuration parameters:
  $Torrus::Collector::runAlways = 0;
  $Torrus::Monitor::runAlways = 0;
- Torrus/DevDiscover/CiscoGeneric.pm: added support for
  CISCO-SYSTEM-EXT-MIB (mainly needed for Cisco Nexus)
- Torrus/DevDiscover/Albis_ULAF.pm (discover):
  new discovery parameter: Albis_ULAF::mp-name-filter
- Torrus/DevDiscover/CiscoIOS.pm: support for Cisco Nexus;
  persistent ifIndex for Nexus
- Torrus/DevDiscover/Fortinet.pm: new discovery module for Fortinet products
- Torrus/DevDiscover/CiscoIOS.pm: Bugfix in discovery
  sequence. This bug was invisible up to perl v5.18.0. Now Perl
  randomizes hash keys on every loop.
- Torrus/Renderer/RPC.pm: new RPC method: TIMESERIES
- Torrus/DevDiscover/UcdSnmp.pm: Loopback interfaces
  filtered out
- Torrus/DevDiscover/RFC4293_IP_MIB.pm: New params:
  RFC4293_IP_MIB::tokenset-members,
  RFC4293_IP_MIB::ipv4-external-serviceid,
  RFC4293_IP_MIB::ipv6-external-serviceid,
  New selector action: TokensetMember
- Torrus/DevDiscover/RFC2863_IF_MIB.pm: Improved interface
  indexing for unknown devices. New parameters:
  RFC2863_IF_MIB::name-hint
  RFC2863_IF_MIB::comment-hint
- Torrus/DevDiscover/CiscoIOS.pm: new discovery parameter:
  CiscoIOS::ifindex-persist
- Torrus/DevDiscover/RFC4293_IP_MIB.pm: new discovery
  module for IPv4/IPv6 traffic stats
- Torrus/DevDiscover/CiscoGeneric.pm (discover):
  64-bit gauges for Cisco memory pools
- Torrus/ConfigTree/Writer.pm (initRoot): new parameter:
  tree-name automatically inserted to the top of the tree

PR:		209745
Submitted by:	corsmith@gmail.com (maintainer)

Update databases/rrdtool to 1.6.0

Most notably, this version of rrdtools.so is thread safe, so the
rrdtools_th.so library is removed.

Bump portrevision for depending ports due to shlib version bump.

For full changelog: http://oss.oetiker.ch/rrdtool/pub/CHANGES

Reviewed by:	kwm
Differential Revision:	D6168

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

- Clarify LICENSE, add LICENSE_FILE - Add NO_ARCH - Handle empty dirs and permissions in plist properly

PR:		205573
Submitted by:	amdmi3
Approved by:	corsmith@gmail.com (maintainer)

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

net-mgmt/torrus: update to 2.07 [1]

- Support stage
- Use @sample

PR:		190369 [1]
Submitted by:	a.shikov itcons net ua, maintainer, wg

The FreeBSD x11@ and graphics team proudly presents a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

Add NO_STAGE all over the place in preparation for the staging support (cat: net-mgmt)

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

Update to version 2.05

PR:		ports/173392
Submitted by:	Jonathan Call <lordsith49@hotmail.com>
Approved by:	maintainer timeout (6 weeks)

- Set default perl version for ports which currently using   (5.x+ and x < 12) scheme.

Approved by: bapt@ (portmgr@)

- Update to 2.04

PR:		ports/170757
Submitted by:	Corey Smith <corsmith@gmail.com> (maintainer)

- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)

- update png to 1.5.10

- Chase rrdtool shlib version bump.

In the rc.d scripts, change assignments to rcvar to use the literal name_enable wherever possible, and ${name}_enable when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

- Update to 2.01 - Add LICENSE (GPLv2)

PR:		ports/160529
Submitted by:	Corey Smith <corsmith@gmail.com> (maintainer)

Rename www/p5-FastCGI to reflect official module name (FCGI) www/p5-FCGI.

- Upgrade to USERS/GROUPS - Provide new rc scripts

PR:		ports/153162
Submitted by:	Corey Smith <corsmith@gmail.com> (maintainer)

- Update to 1.0.9

PR:		ports/152116
Submitted by:	Corey Smith <corsmith@gmail.com> (maintainer)

- Use KNOBS - Use Std pkg names - p5-libapreq2 pulls in mod_perl2

PR:             ports/146898
Submitted by:   pgollucci@ (myself)
Approved by:    maintainer (corsmith@gmail.com)

- update to 1.4.1 Reviewed by:	exp8 run on pointyhat Supported by:	miwi

- Add missing pkg-message to fix the build

Reported by:	pavbot/erwinbot
Approved by:	portmgr (erwin)

- Update to 1.0.8

PR:		133450
Submitted by:	Corey Smith <corsmith@gmail.com> (maintainer)

- Update to 1.0.7

PR:		126536
Submitted by:	Corey Smith <corsmith@gmail.com> (maintainer)

- Update to 1.0.6

PR:		ports/119921
Submitted by:	Corey Smith <corsmith at gmail.com> (maintainer)

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+. Drop support for antique perl.

Work done by:	gabor
Sponsored by:	Google Summer of Code 2007
Hat:		portmgr

First steps in a big migration:

Move net/rrdtool to databases/rrdtool.

    It's an itch which needs to be scratched: net/rrdtool came from
    net/mrtg, which was a good location for it. net/mrtg has later
    been moved to net-mgmt/mrtg. net/rrdtool is "Round Robin Database
    Tools", therefor it's better if it moves to databases/rrdtool.
    Same with net/rrdtool10.

PR:		ports/112942
Submitted by:	Edwin Groothuis <edwin@mavetju.org>

- Update to 1.0.4

PR:		ports/106953
Submitted by:	miwi
Approved by:	maintainer

SHA256ify

Approved by: krion@

New port: net-mgmt/torrus The Data Series Processing Framework - think mrtg with xml configs

Torrus is designed to be the universal data series processing framework.
Although most users deploy Torrus for SNMP monitoring, it might be useful for
data series of any nature. Tobi Oetiker's RRDtool is used for data storage.

    * Configuration compiler and validator. It processes the XML configuration
      files and saves the configuration into a database.
    * View renderer and the web interface. They generate HTML and the graphical
      representation of the datasources and provide user authentication and
      authorization. All generated output is controlled by the configuration
      parameters and templates. The users can easily create their own
      presentation of data series.
    * SNMP Collector. Modular collector core architecture allows further
      extension with new collector and storage types. Any datasource can have
      its own polling schedule.
    * SNMP Device Discovery Tool. Devdiscover is a new, modular, flexible, and
      expandable tool for automatic generation of Torrus configuration files.
      New device types and MIBs are easily added as independent Perl modules.
    * Threshold monitor. All data, regardless of their type and nature, can be
      monitored according to the user-defined rules. The rules can also include
      the datasource-specific parameters, e.g. boundary values etc. The
      thresholds are specified by RPN expressions.

WWW: http://torrus.org

- Corey Smith
corsmith@gmail.com

PR:		ports/86634
Submitted by:	Corey Smith <corsmith@gmail.com>