net-p2p/uhub0.5.1

net-p2p/uhub: Fix building with CMake 4

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

net-p2p: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Attila Nagy <bra@fsn.hu>
  *  Chad J. Milios <milios@ccsys.com>
  *  Damian Gerow <dgerow@afflictions.org>
  *  Daniel Morante <daniel@morante.net>
  *  Dave Cottlehuber <dch@skunkwerks.at>
  *  Dereckson <dereckson@gmail.com>
  *  Devin Teske <dteske@FreeBSD.org>
  *  Dmitriy Limonov
  *  Doug Barton <dougb@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Florent Thoumie <flz@xbsd.org>
  *  Ganael LAPLANCHE <ganael.laplanche@martymac.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Holger Lamm <holger@e-gitt.net>
  *  Holger Lamm <holger@e-gitt.net> and Mario S F Ferreira <lioux@FreeBSD.org>
  *  Jeremy Faulkner <gldisater@gldis.ca>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Maxim Ignatenko <gelraen.ua@gmail.com>
  *  Michael Johnson <ahze@ahze.net>
  *  Munish Chopra <mchopra@engmail.uwaterloo.ca>
  *  Oleg Alexeenkov <proler@gmail.com>
  *  Oleg R. Muhutdinov <mor@WhiteLuna.com>
  *  Pankov Pavel <pankov_p@mail.ru>
  *  Pav Lucistnik <pav@oook.cz>
  *  Rod Taylor <rbt@zort.on.ca>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Shaun Amott <shaun@FreeBSD.org>
  *  Stas Timokhin <stast@bsdportal.ru>
  *  Sverrir Valgeirsson <e96sv@yahoo.se> and
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vasil Dimov <vd@FreeBSD.org>
  *  Yashin Dmitry <yashin.dm@gmail.com>
  *  glocke@bsdstammtisch.at

With hat:	portmgr

Cleanup: for ports under n* categories, drop redundant GH_* knobs.

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

net-p2p/uhub: Unbreak build and update to 0.5.1

PR:		238165
Submitted by:	Allison Nicole Reid <root@cooltrainer.org>

Mark BROKEN on FreeBSD 12 and 13

Reported by:	pkg-fallout
MFH:		2019Q2

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

- Pet portlint - Builds fine on mips64 - Update WWW

The 64-bit arm arch is actually spelled 'aarch64', not 'arm64'.

Mark as broken on armd64 and mips64.

- Clarify LICENSE - Add LICENSE_FILE - Drop uneeded flags - Remove SQLITE option, sqlite support is not conditional - Switch to opt_CMAKE_BOOL - Simplify installation

Remove USE_SQLITE from bsd.databases.mk, replaced by USES=sqlite.

While there replace USE_SQLITE=x by USES=sqlite:x.

PR:		208971
Submitted by:	mat
Exp-run by:	antoine
With hat:	portmgr
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D5951

Cleanup plist

net-p2p/uhub: update to 0.5.0

PR:		192805
Submitted by:	tkato432 yahoo com

net-p2p/uhub: update to 0.4.1

- Support stage
- Use options helpers

PR:		192213
Submitted by:	tkato432 yahoo com

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that have not been bumped yet after the latest libsqlite3.so library version change.

Approved by:	portmgr (implicit)

Add NO_STAGE all over the place in preparation for the staging support (cat: net-p2p)

Convert to new perl framework Convert from USE_GMAKE to USES=gmake

- Update to 0.4.0 - Honour CC and CFLAGS - Convert to OPTIONSNG - Add SQLite dependency - Add DEBUG OPTION - Use DISTFILES over DISTNAME/WRKSRC override - Add LICENSE - Use USE_OPENSSL - Fix PORTLINT warnings

PR:		ports/168855
Submitted by:	koobs <koobs.freebsd@gmail.com>
Approved by:	maintainer (timeout, 58 days)

Move the rc.d scripts of the form *.sh.in to *.in

Where necessary add $FreeBSD$ to the file

No PORTREVISION bump necessary because this is a no-op

In the rc.d scripts, change assignments to rcvar to use the literal name_enable wherever possible, and ${name}_enable when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

- Adjust rc.d script's rcorder dependencies now that it runs as a specific user.   [1] - Satisfy portlint.

Suggested by:	dougb [1]

* Sets up a uhub UID and GID for the daemon to run as. * Modifies configuration file permissions to restrict them to root and the above   GID. * Patches uhub source so that PREFIX/etc/uhub/uhub.conf is the compiled in   default configuration file. * rc.d script changes - enable above uid/gid, enable syslog logging, simplify.

PR:		151819
Submitted by:	Aragon Gouveia <aragon@phat.za.net>
Approved by:	maintainer

- Fix PLIST - Bump PORTREVISION

PR:		ports/151374
Submitted by:	Aragon Gouveia <aragon@phat.za.net>
Approved by:	Dmitry Yashin <yashin.dm@gmail.com> (maintainer), pgollucci (mentor, implicit)

- Bump PORTREVISION for changing Perl dependency

Approved by:	pgollucci (mentor, implicit)

- Fix Perl dependency: use USE_PERL5_BUILD instead of USE_PERL5

PR:		ports/151391
Submitted by:	Aragon Gouveia <aragon@phat.za.net>
Approved by:	Dmitry Yashin <yashin.dm@gmail.com> (maintainer), pgollucci (mentor, implicit)

- Update to 0.3.2

PR:		ports/147308
Submitted by:	Dmitry Yashin <yashin.dm@gmail.com> (maintainer)

- Update to 0.3.1

PR:		ports/145421
Submitted by:	Dmitry Yashin <yashin.dm@gmail.com> (maintainer)

Begin the process of deprecating sysutils/rc_subr by s#. %%RC_SUBR%%#. /etc/rc.subr#

- Add missing patch

Reported by:	QAT@

- Update to to 0.3.0

PR:	ports/143428
Submitted by:	Dmitry Yashin <yashin.dm@gmail.com> (maintainer)

uHub is a high performance peer-to-peer hub for the ADC network. Its low memory footprint allows it to handle several thousand users on high-end servers, or a small private hub on embedded hardware.

WWW: http://www.extatic.org/uhub/

PR:		139670
Submitted by:	Dmitry Yashin <yashin.dm@gmail.com>