news/husky-fidoconf 1.9.20201211_1

news/husky*: Moved man to share/man

Approved by:    portmgr (blanket)

Fix WWW in parent/child ports

Many of the WWW are overwritten later which means the wrong value
is used. This did not happen before where the children were either
 a) just using the pkg-descr from the parents
 b) or had their own separate pkg-descr with custom WWW

Use WWW?= in parents when the child's WWW is different.

Children that use the same WWW as the parent can just inherit it,
i.e., the child WWW can be removed.

Approved by:	portmgr (implicit)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

news/husky*: Update ports to latest versions

PR:		243030
Submitted by:	Oleg Sharoyko <osharoiko@gmail.com> (maintainer)
Reported by:	Ruslan Suleimanov <rs@paket.ua>

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Add DOCS options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

- Fix trailing whitespace in pkg-descrs, categories [g-n]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Rework husky ports to use a more conventional MASTER/SLAVE port pattern. - Remove Makefile.local as it is intended to be a user file that should   not be committed.  Its documentation is poor (r12873) but users are   relying on it. - Remove CONFLICTS as for every port it just conflicted with itself.

With hat:	portmgr

news/husky-(fidoconf|htick|hpt) : builds INFO pages everywhere again

Jan Beich fixed the info pages (thanks Jan!) so this enables their
building for htick and fidoconf of FreeBSD 11 and DragonFly.  While here,
commit USES+=makeinfo to -hpt that went uncommitted accidently yesterday.

news/husky-fidoconf: Test feature rather than OPSYS/OSVERSION

Testing for OPSYS/OSVERSION requires <pre> and <post> inclusions and
isn't necessary.  All we need is the same logic that USES=makeinfo uses.
This simplifies previous commit.

news/husky(-fidoconf): Unbreak F11 and DragonFly (old texi files)

The reason all husky ports were bumped is because the -devel package
suffix was not removed as intended.  It's been removed now so all husky
packages have different names.

The fidoconf package uses texi files to build an info page and an html
page.  It appears there is no man page equivalent.  I couldn't find a
patch to fix the old-format texi files that the latest texinfo programs
can read, so I blocked them from building on FreeBSD 11 and DragonFly
where the port was broken.

While here, I removed %%PORTDOCS%% from man pages.  There were installed
unconditionally (as they should be), so setting DOCS option to off would
have broken the port as well.  Also use the INFO definition as it should
be rather than hardcoding the pkg-plist.

The maintainer will be notified so he can prepare a patch for texi or
update the port.

Approved by:	blanket (unbreaks F11)

- Drop @dirrm* from pkg-plists

Approved by:	portmgr blanket

Remove '-devel' prefix from husky* ports

Today the older unstaged husky-* ports were removed as the first part
of a transition move the development versions into their place.  This
commit completes the relocation of husky-*-devel ports.

news/husky*: Remove Husky ports to pave way for next version

In a two-step process, the Husky ports that are due to be removed
on September 1 are being removed now.  The next step will be to rename
the husky-*-devel ports to plain husky-*

Approved by: 	former maintainer (fjoe@)

Rename all patches that contain '::' as a path separator, and use '__' instead.

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

Modernize LIB_DEPENDS

With hat:	portmgr

Allow to build with texinfo from ports

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat: news)

Do not define gmake usage after pre.mk While here: - trim headers - convert to uses=gmake - remove now useless pre.mk/post.mk dancing

Unbreak on !i386.

- Get Rid MD5 support

- Switch SourceForge ports to the new File Release System: categories starting with N

- Remove unneeded dependency from gtk12/gtk20 [1] - Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG - Remove X11BASE support in favor of LOCALBASE or PREFIX - Use USE_LDCONFIG instead of INSTALLS_SHLIB - Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
	Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
	ehaupt, nox, itetcu, flz, pav

PR:		116263
Tested on:	pointyhat
Approved by:	portmgr (pav)

Retire NO_FILTER_SHLIBS now that it no longer serves a purpose

Remove USE_REINPLACE from all categories starting with N

Add SHA256 checksum.

- Register CONFLICTS with husky-*-devel

SIZE'ify.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Update to 0.14.4.

Specify RUN_DEPENDS explicitly.

Pointed out by:	Dmitry Morozovsky

Remove BROKEN. My recent commits were supposed to fix build failures.

BROKEN: Does not build

Use INFO=.

Do not build .dvi docs in install stage.

Do not build dvi documentation (DVIDIR is now defined in huskymak.cfg).

Update to 0.14.3

De-pkg-comment.

add RUN_DEPENDS on husky-base

correctly specify path to fidoconfig configuration file in man pages

do not filter shlibs

install files with correct file modes

fix comments, remove some (commented out) left-overs

Noticed by:	Gerrit Kuehn

Add ports for Husky Fidosoft Project (most of modules from it).