news/py-pynzb0.1.0_5

*/*: switch dependency from devel/py-lxml5 to devel/py-lxml

Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml  (now at version 6.0.1)

To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.

Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.

PR:		289491
Approved by:	Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
		crees, madpilot, delphij, marcus, nivit, kai,
		skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
		0mp, Eric Camachat <eric@camachat.org>

*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)

This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.

It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.

This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.

Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>

PR:		287144, 288047
Reported by:	makc (via ports-committers),
		vvd (PR 288047),
		diizzy (PR 287144)
Approved by:	portmgr (chase dependency change, unbreak build)
Fixes:		230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)

news/py-pynzb: Switch to PEP517

Approved by:	hrs (mentor, blanket)

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++ -DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable -Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi -Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings -Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x -MT _quickfix_la-QuickfixPython.lo -MD -MP -MF .deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o .libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

news/py-pynzb: Add NO_ARCH

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

news: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam David <adam@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrey Slusar <anray@FreeBSD.org>
  *  Brian Somers <brian@FreeBSD.org>
  *  Carey Jones <mcj@acquiesce.org>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Don Croyle <croyle@gelemna.org>
  *  Donald Burr <dburr@FreeBSD.org>
  *  Frederic Cambus
  *  George Sorsby <george@crackpipe.net>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  John Holland <john@zoner.org>
  *  Jun-ichiro itojun Itoh <itojun@itojun.org>
  *  Kirill Ponomarew <ponomarew@oberon.net>
  *  Lasse L. Johnsen (lasse@freebsdcluster.org)
  *  Lewis Thompson <purple@lewiz.net>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Max Khon
  *  Michael L. Hostbaek <mich@freebsdcluster.org>
  *  Mikolaj Rydzewski <miki@ceti.pl>
  *  Noritaka Ishizumi <graphite@taurus.bekkoame.or.jp>
  *  Oliver Braun <obraun@informatik.unibw-muenchen.de>
  *  Pete Fritchman <petef@databits.net>
  *  Ralf van der Enden <tremere@cainites.net>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Thierry Thomas <tthomas@mail.dotcom.fr>
  *  Tim Welch <ports@thepentagon.org>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yen-Ming Lee <leeym@cae.ce.ntu.edu.tw>
  *  adam
  *  asaddi@philosophysw.com
  *  bkhl@elektrubadur.se
  *  gary@hayers.org
  *  ijliao
  *  kbowling
  *  obrien@cs.ucdavis.edu
  *  proff@suburbia.net
  *  smace
  *  torstenb

With hat:	portmgr

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where they now redirect to anyway. All new urls checked to return 200, I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Canonicalize PyPi WWWs: - Switch to https:// - Remove trailing slashes

Approved by:	portmgr blanket

Convert Python ports to FLAVORS.

Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336

- Convert ports of news/ and print/ to new USES=python

Approved by: portmgr (implicit)

Remove indefinite articles and trailing periods from COMMENT, plus minor COMMENT typos and surrounding whitespace fixes. A few Makefiles where not included as they contain Latin-1 characters that break the Phabricator workflow. Category N.

CR:		D307
Approved by:	portmgr (bapt)

- Remove easy_install dependency - Convert to PYDISTUTILS_AUTOPLIST - Bump PORTREVISION to enforce a cleanup for the easy_install references

With hat:	python@
Approved by:	portmgr (implicit)

Add stage support to news, and improve correctness. I am not touching the husky ports with a 10 foot pole.

atp:
	stage, improve pkg-message
crashmail:
	stage
diablo:
	too wacky to stage, but convert WITH_* to OPTIONS, unmute
	commands that shouldn't be muted, use :MDOCS
fidogate-ds:
	stage, OPTIONS, treat examples as EXAMPLES, not DOCS, handle
	/var/* in the plist properly
golded+:
	stage, OPTIONS, protect examples behind %%PORTEXAMPLES%%
nntpbtr:
	this was an unbelievably PITA
	stage, add missing prototypes, add missing return types,
	rename patch files to what they actually patch
nntpcache:
	stage support, required lots of Makefile.in patching,
	call submakes correctly, handle config files properly
nzbperl:
	stage, use OPTIONS, remove obsolete pkg-message
papercut:
	stage, handle config file properly
py-pynzb:
	stage, use OPTIONS helper to avoid bsd.port.options.mk inclusion
s-news:
	stage
slrnconf:
	stage
slrnface:
	stage, install required files to datadir, not examplesdir,
	generate proper pkg-message
sn:
	stage

- Reassign lioux' ports to the heap

With hat:	portmgr

Python cleanup: - USE_PYTHON* = 2.X -> USE_PYTHON* = 2 - USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes Reviewed by:	python (mva, rm) Approved by:	portmgr-lurkers (mat)

- Update WWW:   - http://cheeseshop.python.org/ -> https://pypi.python.org/   - http://pypi.python.org/ -> https://pypi.python.org/

With hat:	python
Approved by:	bapt (portmgr)

Add NO_STAGE all over the place in preparation for the staging support (cat: news)

Convert to new options framework

- Remove optional dependency on devel/py-elementtree since it's   already including on python 2.5 and later versions. These are   already the required versions for the port.   o Remove ELEMENTTREE from OPTIONS   o Bump PORTREVISION due to dependency list change

PR:		159867
Submitted by:	Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Get Rid MD5 support

Add LICENSE* information

New port py-pynzb version 0.1.0: A unified API for parsing NZB files