print/epson-inkjet-printer-escpr1.8.5

print/epson-inkjet-printer-escpr: Update to 1.8.5

- Add support for Epson-EP-716A_Series, Epson-EP-901A_series,
  Epson-EP-M476T_Series, Epson-ET-2860_Series, Epson-ET-2870_Series,
  Epson-EW-056A_Series, Epson-EW-456A_Series, Epson-L1270_Series,
  Epson-L3270_Series, Epson-L3280_Series and Epson-L5310_Series

PR:		280343

print/epson-inkjet-printer-escpr: Update to 1.7.26

New PPD files for the following models have been added.
EP-315 series
PX-S155 series
PX-S505 series
WF-2110 series
XP-65 series
WF-M1130 series

No file changes for autoconf, so fixed to use 2.69.
pkg-descr was re-quoted from the description for other packages, not from the README.

PR:		270169

print/epson-inkjet-printer-escpr: Update to 1.7.22

PR:		267513

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

print/epson-inkjet-printer-escpr: Update to 1.7.21

- Supported new models:

   ET-2400 series
   WF-2930 series
   WF-2950 series
   WF-2910 series
   XP-3200 series
   XP-2200 series
   XP-4200 series

PR:		265773

print/epson-inkjet-printer-escpr: update to 1.7.18

PR:		261587

print/epson-inkjet-printer-escpr: Cleanup port

PR:	259208

print/epson-inkjet-printer-escpr: Update to 1.7.17

New PPD files for the following models have been added:
	* ET-1810 series
	* ET-2800 series
	* ET-2810 series
	* ET-2820 series
	* ET-2850 series
	* L3250 series
	* L3260 series
	* L4260 series
	* L5290 series
	* ST-C2100 series
	* WF-2820 series
	* WF-2840 series
	* WF-2870 series
	* XP-2150 series
	* XP-3150 series
	* XP-4150 series

PR:		258074

print/epson-inkjet-printer-escpr: Update to 1.7.11

New PPD file for ET-4800 series has been added.

PR:		256611
Approved by:	maintainer

print/epson-inkjet-printer-escpr: Update to 1.7.10

Drop gmake from USE=. This is because the syntax that requires gmake is
not used.

PR:		256115
Approved by:	maintainer

print/epson-inkjet-printer-escpr: Update to 1.7.9

PR:		250441
Approved by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

One more small cleanup, forgotten yesterday. Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

print/epson-inkjet-printer-escpr: Update to 1.7.7

PR:		242535
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

print/epson-inkjet-printer-escpr: Update to 1.7.3

PR:		240550
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

Convert to UCL & cleanup pkg-message (categories [p-r])

print/epson-inkjet-printer-escpr: update to 1.6.41

PR:		238328
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

print/epson-inkjet-printer-escpr: Update to 1.6.38

PR:		236796
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

print/epson-inkjet-printer-escpr: update to 1.6.33

PR:		234434
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

Update to 1.6.30

PR:		231898
Submitted by:	maintainer

print/epson-inkjet-printer-escpr: Update to 1.6.21

PR:		229036
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

print/epson-inkjet-printer-escpr: Update to 1.6.19

PR:		226839
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

print/epson-inkjet-printer-escpr: fix MASTER_SITES

PR:		221780
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

print/epson-inkjet-printer-escpr: Update to 1.6.17

PR:		221780
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

print/epson-inkjet-printer-escpr: 1.6.4 -> 1.6.9

- MASTER_SITE changed to LOCAL/pi for now
- corrections of brightness, contrast are halved
- saturation is precisely set

PR:		209221
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Combine print/cups-base, print/cups-client and print/cups-image into print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster, improve print/cups-filters, print/foomatic-* and update print/hplip to 3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.

Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format.  It is
  only used to implement filters and printer drivers and these only exist
  in the context of a cups server so there's no need to separate this from
  cups-base.
- cups-client provides a library that allows applications to print via cups.
  It is possible to use the library to access a remote cups server without
  running a local cups server, but such a setup is discouraged and the
  configuration file to set this up has been marked deprecated.  It is
  better to run a local cups server and let that talk to the remote cups
  server because then you have the benefits of local job queuing in case the
  remote server is down or busy.  Given this and the fact that without
  filters cups-base is now smaller than it used to be it makes sense to
  merge the ports.  The patch also adds options IPPTOOL, DOCS and NLS which
  when disabled make the new cups package smaller than the current
  cups-client package.  Merging the ports also prevents problems with
  options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
  There isn't really a need for such a metaport so cups-base can be renamed
  to cups.  The filters can be depended on by printer drivers such as hplip
  if they need them.

Additional changes to the new print/cups:
- Clean up the patches.  They seem to have been regenerated with post-patch
  changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
  file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
  other ports don't have to add links to it.
- Remove ulpt(4) helper scripts.  The port uses libusb with ugen(4).
- Remove support for mDNSResponder.  cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.

Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
  of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
  port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.

Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed.  This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.

Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.

Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.

Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support.  This is no longer supported
  upstream.
- Stop installing hpcups PPDs.  These are now automatically generated.  The
  bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
  like avahi-daemon does.  This fixes Zeroconf support for HP network
  printers.

PR:		207746
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update to 1.6.4.

Submitted by:	Tatsuki Makino (maintainer)
PR:		206416

Update to 1.6.1 and add patches to fix issues reported in PR 203637.

Submitted by:	Tatsuki Makino (maintainer)
PR:		204250

Update to 1.6.0.

Submitted by:	Tatsuki Makino (maintainer)
PR:		203637

Add print/epson-inkjet-printer-escpr, CUPS driver for EPSON inkjet printers with ESC/P-R control language under GPL.  The port name is the same one as Linux's while it is a bit lengthy.

Submitted by:	tatsuki_makino@hotmail.com
PR:		203258