print/tex-xetex 20250308_1

devel/icu: update to 59.1

- Temporarily keep C++98 working in consumers for Clang's default -std=

Changes:	http://site.icu-project.org/download/59
PR:		218788
Submitted by:	takefu@airport.fm, dcarmich@dcarmichael.net (early version)
Exp-run by:	antoine

Add missed PORTREVISION bumps after recent poppler update

Split off the harfbuzz icu support into it's own port.

PR:		207779
Submitted by:	Vladimir Kondratyev <vladimir@kondratyev.su>
Exp-run by:	antoine@

Chase update of graphics/poppler (and slaves ports) in revision r430777

devel/icu: update to 58.1

Changes:	http://site.icu-project.org/download/58
PR:		214384
Exp-run by:	antoine
Approved by:	office (bapt)

- Update devel/icu to 57.1. - Clean up the Makefile. - Follow some upstream recommendations (--with-data-packaging=archive,   --disable-renaming, -DICU_NO_USER_DATA_OVERRIDE). - Patch makefiles to install static libraries with INSTALL_DATA so they   aren't stripped. - Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc. - Fix endianness detection in ICU.  The code wanted to use BYTE_ORDER   d

PR:		205120
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Chase update of Poppler after revision r421386

Bump PORTREVISION for the icu revert.

This time not bumping lang/php70, but devel/php70-intl which is the one
really depending on icu.

PR:		205120
With hat:	portmgr
Sponsored by:	Absolight

devel/icu: bump PORTREVISION on dependent ports

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]

Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]

- Separate libsynctex from tex-web2c to devel/tex-synctex. - Separate basic TeX engines from tex-web2c to print/tex-basic-engines. - Add CTAN mirrors to MASTER_SITES. - Drop gmake where not required. - Remove extra dependencies in print/tex-aleph, print/tex-dvipdfmx,   print/tex-luatex, print/tex-xetex, and japanese/tex-ptex.

Update TeXLive to TL2015.

- print/texlive-infra was renamed with print/texlive-tlmgr.
  Note that currently tlmgr(1) does not work because of
  lack of TLPDB.  This will be fixed.

- Lua libraries used in LuaTeX are separated into
  devel/tex-libtexlua and devel/texlibtexluajit.
  USE_TEX supports them via keywords "texlua" and "texluajit".

- libsynctex is currently installed by devel/tex-web2c.
  This will be separated into a single port.

- Add graphics/libpotrace and use installed libpotrace
  and libharfbuzz.

Update icu to 55.1

Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Bump PORTREVISION after graphics/poppler update to 0.26.3

Cleanup plist

Update TeXLive to 2014.

- Note that full support of configuration tools such as tlmgr and texconfig
  is not ready yet.

- Most of dviware now supports libpaper to choose the default papersize.
  Use paperconfig(8) utility or print/papersize-default-* packages.

- Some quite old macros of the age of latex209 have been removed, and
  there are user-visible/invisible incompatibilities.  Please send a report
  to freebsd-tex@FreeBSD.org or file a PR if you have trouble.

Support stage for texlive, given it is impossible to rebuild the fmt files into the stage then they are now rebuild in post-installation, like it is done in other package system

Update openjpeg to 2.1.0.

Version 2.x is incompatible with openjpeg 1.5. Preserve it as openjpeg15
and update users.

Approved by:	portmgr (implicit) for NO_STAGE ports

- Convert gmake,bzip2,xz to USES

Approved by:	portmgr

The FreeBSD x11@ and graphics team proudly presents a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

Chase boost and icu bump While here convert some LIB_DEPENDS

Fix properties on pkg-plist

Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.

Convert LIB_DEPENDS to allow graphics/graphite2 to have the libname upstream expect it to have

Add NO_STAGE all over the place in preparation for the staging support (cat: print)

Add an explicit dependency upon pkg-config (USES+=pkgconfig) uncovered by an exp libiconv -> inconv swith.

Approved by:	portmgr (implicit)

Add USE_TEX=texlive for TeXLive-specific ports.

- Separate print/tex-dvipdfmx from print/texlive-base and add libpaper   support.  dvipdfmx's default paper size can be set by   ${LOCALBASE}/etc/papersize and/or PAPERSIZE environment variable as   other programs like print/psutils do.

- Use absolute pathname in {fmtutil,texconfig,updmap}-sys programs because
  manually-installed and/or old TeXLive files can prevent them from
  working. [1]

- Fix pkg-plist in print/texlive-texmf.

- Remove DIST_SUBDIR from Mk/bsd.tex.mk.

Reported by:	bsam, Stephen Montgomery-Smith [1]

TeXLive mega commit.  The following ports have been added:

* Meta port
   - print/texlive-full: meta port to install all of the TeXLive components

  * Libraries
   - devel/tex-kpathsea: kpathsea library
   - devel/tex-web2c: WEB2C toolchain and TeX engines
   - print/tex-ptexenc: character code conversion library for pTeX

  * Base part of the TeXLive
   - print/texlive-base: binary programs in TeXLive
   - print/texlive-texmf: macro and font data in TeXLive
   - print/texlive-infra: tlmgr dependency (Perl modules)

  * TeX Formats
   - print/tex-formats: TeX, LaTeX, PDFTeX, AMSTeX, ConTeXT, CSLaTeX,
       EplainTeX, METAFONT, MLTeX, PDFTeX, TeXsis
   - print/tex-aleph: Aleph/Lambda
   - print/tex-xetex: XeTeX
   - print/tex-luatex: LuaTeX
   - print/tex-jadetex: JadeTeX
   - print/tex-xmltex: XMLTeX
   - japanese/tex-ptex: pTeX

  * DVI ware
   - print/tex-xdvik: XDvi

Mk/bsd.tex.mk is added for common part and USE_TEX knob [1].

Approved by:	portmgr (old version) [1]
PR:		ports/171571
PR:		ports/176399 [1]