print/texlive-base 20250308_4

(1) Add new variable, XFREE86_VERSION, to specify which version of     XFree86 (3 or 4) to depend to when USE_XLIB is set.     XFREE86_VERSION defaults to 3 for now, but adventurous users can     override it in /etc/make.conf.  When XFREE86_VERSION=3, USE_XLIB     will add a dependency to x11/XFree86; when it is set to 4, the     dependency will be to x11/XFree86-4-libraries.  When     XFREE86_VER

Since XFree86 version 4 includes some software that used to be
    separate ports, when XFREE86_VERSION=3 the following variables are
    provided:

    USE_DGS		LIB_DEPENDS on x11/dgs
    USE_FREETYPE	LIB_DEPENDS on print/freetype
    USE_MESA		LIB_DEPENDS on graphics/Mesa3
    USE_XPM		LIB_DEPENDS on graphics/xpm

    When XFREE86_VERSION=4, these variables have no effect.  The
    LIB_DEPENDS in the tree for the above four ports have all been
    converted to the USE_* counterparts.  For your information, this
    is the count of the number of ports:

    USE_DGS		0
    USE_FREETYPE	16
    USE_MESA		36
    USE_XPM		236

    There is a new variable, XAWVER, which is set to 6 when
    XFREE86_VERSION=3 and 7 when XFREE86_VERSION=4.  This is also
    passed to PLIST_SUB so ports that build Xaw based shared libraries
    can use this variable to substitute the shlib version number.

    There is also a provision of using a separate mtree file for
    XFREE86_VERSION=4, but that part is not enabled yet.

Reviewed by:	the ports list
Tested by:	make index (XFREE86_VERSION=3 only)

(2) Add hebrew to list of valid categories.
Submitted by:	nbm

(1) /usr/share/info/dir was renamed to dir-tmpl. (2) Now it is not necessary to exist a file "info/dir" when install-info is executed.

By (1) and (2), I removed the next line:

[ -f %D/info/dir ] || sed -ne 1,/Menu:/p /usr/share/info/dir > %D/info/dir

from PLIST or Makefile

CV: ----------------------------------------------------------------------

Install texi2dvi which is required by texi2pdf.

PR:		19712
Submitted by:	"Mario Sergio Fujikawa Ferreira" <lioux@uol.com.br>

Bump png shared library version.

Submitted by:	Hajimu UMEMOTO <ume@mahoroba.org>

Move the @unexec install-info before the info files; add @exec install-info after the info files, as required by PW^H^Hthe handbook.

Cleanup ${PREFIX}/info/dir at deinstall time.

Add more files; remove directories at deinstall time.

Add man pages

Attempt to fix errors caused by libwww upgrade.

NOTE: This hasn't been tested and I'm not presently able to test it.

Upgrade to 20000418.

Submitted by:	maintainer

WRKSRC-related fixes.

Convert to PORTNAME/PORTVERSION.

Anomalies found:
 - autoconvert was missing "zh-" in front of PKGNAME
 - xcin (both 2.3 and 2.5) had invalid version strings
 - neither of xcin ports had NO_LATEST_LINK
 - telnet8-1.0 thinks PKGNAME is zh-telnet-1.0

Fixed all except the last (I wasn't sure if it was intentional).

Accidental whitespace

Update with the new PORTNAME/PORTVERSION variables

Change MASTERSITES: ftp.cdrom.com -> ftp.freesoftware.com

Use texmf-1.0.2 instead of 1.0.1.

Upgrade to 1.0.7.

PR:		16433 Submitted by:	The maintainer(Keith Jang <keith@freebsd.sinica.edu.tw>) Update CJK to the version of 2000/01/27.

Ports no longer need to pass CXXFLAGS to configure.  bsd.port.mk does this for them.

Upgrade to web2c version 7.2b

Fromm maintainer:

1. Change freetype-1.2 to freetype-1.3 in post-install, so
   it can find freetype sources to build ttf2pk & ttf2tfm.
2. It no longer uses moettf, but Arphic ttf instead, which
   has no character loss and IMHO much more beautiful. :)
3. Generates GB tfms from Arphic fonts.
4. Update maintainer's address.

PR:		16042
Submitted by:	maintainer

remove --prefix=${PREFIX} when GNU_CONFIGURE=yes and other minor cleanups

PR:		14759
Submitted by:	Jeremy Lea <reg@shale.csir.co.za>

Bump freetype's lib number

Update to CJK v4.3.0.

Submitted by:maintainer.

$Id$ -> $FreeBSD$

expr -> ${EXPR} mv   -> ${MV} rm   -> ${RM} tr   -> ${TR}

sed -> ${SED}

echo -> ${ECHO} or ${ECHO_MSG}  and in some cases, move echo stuff to pkg/MESSAGE and use ${CAT} ${PKGMESSAGE}

Upgrade to 1.0.6.

Reviewed by:	Bernd Rosauer <br@netland.inka.de>

Change Id->FreeBSD.

grep -> ${GREP} true -> ${TRUE} false -> ${FALSE}

Not a good idea to depend on non-existent teTeX-beta.

Update checksum (some files have been re-created)

MASTER_SITE_TEX_CTAN was misspelled.

An overridable MASTER_SITE_CTAN does little good if it is at the bottom of the MASTER_SITES list.

Upgrade to 1.0.5.

Submitted by:	Bernd Rosauer <br@netland.inka.de>
Reviewed by:	nik

#4/4 enforcing Caps, no period

[Has anyone figured-out what makes the number 393 so interesting to PW, now?]

I wonder what was going through Jordan's head during his infamous
$Id$-smashing commit.

Before I forget....

Thanks to naddy@mips.rhein-neckar.de (Christian Weisgerber) for prompting
this commit.  See msg-id: 7geokh$tje$1@mips.rhein-neckar.de

As threatened, enforce the "Capital, no period" rule.  Ellipses are permitted.  Note that, given current numeric motif of PW, this is done in four equally-sized commits of 393 files each.

Remove the test to create ${PREFIX}/share/info/dir as it is now in bsd.port.mk and this helps to unify the check and install.

Change "Whom" line to match maintainer line, some people apparently use the first e-mail address they find.

Requested by:	maintainer

Correct typo of MASTERSITE. Submitted by: 	MAINTAINER.

Update to version 4.2.0.

PR:		10406
Submitted by:	Keith Jang <keith@gcn.net.tw>

Patch the main makefile. Sometimes gmake exits(0) even if an inferior make failed. (looks like a bug in gmake) PR:		ports/9690

Unset all TEX* environment variables before starting the build phase. PR:		ports/9690

Don't install ${PREFIX}/bin/install-info

PR:		ports/8387
Submitted by:	finrod@niobe.ewox.org

A few more USE_XLIBs.

Sorry, marked teTeX instead af teTeX-beta broken by mistake.  Also, change broken to manual-package-build, it can only be built with an empty /usr/local.

Sorry, still doesn't package.

===>  Building package for teTeX-0.9-981113
tar: can't add file share/texmf/web2c/etex.efmt : No such file or directory
tar: can't add file share/texmf/web2c/etex.log : No such file or directory
tar: can't add file share/texmf/web2c/lambda.fmt : No such file or directory
tar: can't add file share/texmf/web2c/lambda.log : No such file or directory
tar: can't add file share/texmf/web2c/omega.fmt : No such file or directory
tar: can't add file share/texmf/web2c/omega.log : No such file or directory
tar: can't add file share/texmf/web2c/pdflatex.fmt : No such file or directory
tar: can't add file share/texmf/web2c/pdflatex.log : No such file or directory
tar: can't add file share/texmf/web2c/pdftex.fmt : No such file or directory
tar: can't add file share/texmf/web2c/pdftex.log : No such file or directory
pkg_create: tar command failed with code 256
Creating package /usr/ports/packages/All/teTeX-0.9-981113.tgz
Registering depends: libwww-5.2 png-1.0.2.
Creating gzip'd tar ball in '/usr/ports/packages/All/teTeX-0.9-981113.tgz'
*** Error code 1

Stop.

It works fine on maintainer and my box. Submitted by:	maintainer

Update maintainer's address.